Search results for 'mat kit'

Blowsion Engine Leak Down Block Off Kit. This is an essential tool for determining engine health. Make sure your fresh rebuilt engine is sealed properly, or use it to diagnose engine and/or tuning issues. Utilize your existing leak down tester or plug your Pop-off pressure gauge into the pulse fitting on your cases and check for air leaks. Includes anodized aluminum plates and rubber gaskets to match. All mounting hardware included. Fits all years 62T 701 engines and 62t 760 engines with a b-pipe manifold.

Part Number: 01-03-816

OEM Yamaha 62T Crankcase Machined for DASA +12mm Stroker Cylinder Kits.

Part Number: 01-03-766

ADA Racing Cylinder Head Girdle Kit for Yamaha 701/760 and Yamaha 1100/1200 Girdled Cylinder heads. Includes 6 stainless studs, 6 stainless washers, and 6 chrome acorn nuts. The only true girdle system. It does not bolt the cylinder to the cases, but sandwiches the cylinder between the head and the cases. Therefore, there is no pressure on the base of the cylinder. The threads are rolled for strength and not cut. Thread rolling compresses the material adding strength to the threads. Cutting threads leaves the root of the thread sharp, weakening the thread and making them easier to break.

Part Number: YA701G6

Brand new modified OEM Yamaha 62T Crankcases now available from Blowsion for DASA Big Bore Stock Stroke Engine Setups. Includes Case Bore, Epoxy Fill, Trenching and Reinforcement plate for Stock Stroke Crankshafts.

Part Number: 01-03-763
OEM Yamaha Crankcase Part Number: 62T-15100-00-00

DASA Piston Ring Kit. Kit includes 2 Piston Rings. Available for DASA 85MM, 89MM and 94MM Pistons.

Blowsion Custom Cut Mat Kit. Glue it on! Fits all 1994-1995 Yamaha FX-1 Models with stock tray. Includes bottom, tray sides, dash and undermat foam. Check out the new Dual Color Turf option now available! See special formulated solvent-based mat glue for installation. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.

Part Number: 04-02-051

Blowsion Custom Cut Side Rail Turf Kit. Fits all years Yamaha Superjet, FX1, Polaris Octane, Rickter and Kawasaki 650 and 750 Stand up Models. Improve the traction and looks on the side rails of your ski with our custom fit side rail covering kits. Side Rail Turf Kits Include enough material to cover the front bumper, sides, and rear corners of the side rail. Side rail kits bond directly to the fiberglass. All OEM/Stock plastic will need to be removed prior to application of side rail turf kit. For most applications a Quart of Mat Glue is recommended for installation. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.

Part Number: 04-02-324

Blowsion Custom Cut Mat Kit. Glue it On! Fits all 1994-1995 Yamaha FX-1 Models with Digger Footwells. Includes bottom, tray sides, dash, footwell mat pieces, and undermat foam. Digger Footwells not included. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.

Part Number: 04-02-053

Blowsion Adjustable T-Handle Factory Pipe Headpipe Water Screw Kit - Standard Size. T-Handle Design provides quick and easy adjustments for tuning. This kit is a direct replacement for those seized up water adjusting screws. Compatible with all Factory Headpipes.

Part Number: 01-01-741

Brand new modified OEM Yamaha 62T Crankcases now available from Blowsion for DASA Big Bore Stroker Engine Setups. Includes Case Bore, Epoxy Fill, Trenching and Stroker Case Reinforcement plate for +5mm, +6mm, 8mm and +10mm stroker crankshafts.

Part Number: 01-03-762

This is the FINAL answer for keeping your stitched and Hydro Turf mat kit edges stuck down. Use to seam edges permanently. Once dry it creates seamless perfection.

Part Number: 06-03-151

Genuine 3 Piece OEM Yamaha Crank Seal Kit. fits all years yamaha 701/760/850/DASA Engines.

Part Number: 02-02-487

Pro-X Pistons are precision machined on the latest, state of the art CNC equipment. The same low-expansion, low-friction piston alloy is used as is used for all major Japanese engine manufacturers. ProX Piston Kits are a first class solution to replace the original piston in your Personal Watercraft. Sold Each.

Blowsion Mat Kit Glue "Blow Goo" to the rescue. Use this solvent-based contact adhesive with your Hydro Turf or stitched mat kit and never worry again about your mats coming loose. Not water-based!

Part Number: 06-03-142

Blowsion Mat Kit Glue "Blow Goo" to the rescue. Use this solvent-based contact adhesive with your Hydro Turf or stitched mat kit and never worry again about your mats coming loose. Not water-based!

Part Number: 06-03-141