Search results for 'mat kit'

Blowsion Engine Leak Down Block Off Kit. This is an essential tool for determining engine health. Make sure your fresh rebuilt engine is sealed properly, or use it to diagnose engine and/or tuning issues. Utilize your existing leak down tester or plug your Pop-off pressure gauge into the pulse fitting on your cases and check for air leaks. Includes anodized aluminum plates and rubber gaskets to match. All mounting hardware included. Fits all years 62T 701 engines and 62t 760 engines with a b-pipe manifold.

Part Number: 01-03-816

OEM Yamaha 62T Crankcase Machined for DASA +12mm Stroker Cylinder Kits.

Part Number: 01-03-766

Brand new modified OEM Yamaha 62T Crankcases now available from Blowsion for DASA Big Bore Stock Stroke Engine Setups. Includes Case Bore, Epoxy Fill, Trenching and Reinforcement plate for Stock Stroke Crankshafts.

Part Number: 01-03-763
OEM Yamaha Crankcase Part Number: 62T-15100-00-00

Check out that mat kit! This 2022 Rickter Edge has a one of a kind GatorStep mat kit in a beautiful brushed grey and teal to match the vibrant custom graphics kit. Teal Blowsion Billet pieces complete the look on this ready-to-rip ski. With a 1000cc Dasa Powervalve engine and a SOLAS Yamaha Magnum Pump 148MM, this ski performs and handles awesome on flat water or surf. Available for immediate shipment, this ski is currently in our Blowsion Showroom.

Part Number: 10-01-072

Brand new Rickter Edge Built for the IJSBA World Finals event in Lake Havasu, this ski got all the attention on vendor row! With custom Blowsion graphics, paired with a one of a kind Jettrim STAR mat kit, this ski is sure to turn heads wherever it goes. Not only does it look great, but it has plenty of power with the 1100cc Dasa Powervalve engine. Of course, no ski would be a Blowsion ski without our signature Blowsion Billet Handlepole. This ski is currently in our Blowsion Showroom and ready to ship immediately.

Part Number: 10-01-071

Blowsion Custom Cut Mat Kit. Glue it on! Fits Rickter EVO FS1 / FS2 and Older Models. Includes bottom, tray sides, dash and undermat foam. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.

Part Number: 04-02-050

Blowsion Custom Cut Mat Kit. Glue it on! Fits Rickter XFS Models. Includes bottom, tray sides, dash and undermat foam. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.

Part Number: 04-02-060

Blowsion Custom Cut Side Rail Turf Kit. Fits all years Yamaha Superjet, FX1, Polaris Octane, Rickter and Kawasaki 650 and 750 Stand up Models. Improve the traction and looks on the side rails of your ski with our custom fit side rail covering kits. Side Rail Turf Kits Include enough material to cover the front bumper, sides, and rear corners of the side rail. Side rail kits bond directly to the fiberglass. All OEM/Stock plastic will need to be removed prior to application of side rail turf kit. For most applications a Quart of Mat Glue is recommended for installation. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.

Part Number: 04-02-324

Blowsion Stainless Steel Pump Bolt Kit for all Yamaha Superjet and Rickter Models. The Socket Head Bolt design allows for use of hex key tool which results in much easier access. A Great replacement for OEM Yamaha Part Number: 90119-10948-00. Kit Includes 4 Bolts and 4 Washers.

Part Number: 02-02-478

Blowsion TNT Exhaust Mounting Block. The foam blocks are designed to hold the pipe in position so that the coupler and stinger height match up perfectly to the manifold and waterbox. Perfect alignment will help optimize performance and increase longevity of the rubber couplers. Kit includes 3 individual foam blocks with 3M adhesive backing. Compatible with all TNT, RRP Carbon and PowerFactor Style Exhaust Systems.

Part Number: 01-01-168

Brand new modified OEM Yamaha 62T Crankcases now available from Blowsion for DASA Big Bore Stroker Engine Setups. Includes Case Bore, Epoxy Fill, Trenching and Stroker Case Reinforcement plate for +5mm, +6mm, 8mm and +10mm stroker crankshafts.

Part Number: 01-03-762

This is the FINAL answer for keeping your stitched and Hydro Turf mat kit edges stuck down. Use to seam edges permanently. Once dry it creates seamless perfection.

Part Number: 06-03-151

Blowsion Mat Kit Glue "Blow Goo" to the rescue. Use this solvent-based contact adhesive with your Hydro Turf or stitched mat kit and never worry again about your mats coming loose. Not water-based!

Part Number: 06-03-142

Blowsion Mat Kit Glue "Blow Goo" to the rescue. Use this solvent-based contact adhesive with your Hydro Turf or stitched mat kit and never worry again about your mats coming loose. Not water-based!

Part Number: 06-03-141

Each kit includes all materials needed for mixing into, and handling, your installation resin (available separately). Silica Thickener, Mixing Cups, Brushes, Gloves and Knitted fabric cloth for all seams.

Part Number: 06-03-113