Products
-
Battery Box Strap - Heavy Duty
Blowsion Heavy Duty Freeride Battery Strap. Much Stronger and slightly shorter than OEM Yamaha straps which takes away the slack when using aftermarket batteries. 10 inches total length (hook to hook).
Part Number: 01-04-604
Learn More -
OEM Yamaha Steering Cable Joint Ball Shaft
OEM Yamaha Steering Cable Joint Ball Shaft. Threads onto the end of steering cable and connects to the Steering Joint Ball Stud.
Part Number: EU0-61461-30-00
Learn More -
MSD Salt Water Spark Plug Boot Kit
This is THE ANSWER for riders dealing with erratic spark caused by corrosion and exposure to saltwater. Kit includes instructions, two MSD 90-degree boots, MSD plug cap retainers, two crimp-on terminals, vulcanizing tape, and dielectric compound.
Part Number: 01-04-411
Learn More -
Hydro-Turf Lifter Wedges
Inexpensive traction option. Gain control of your ski or runabout by applying these lifter wedges to your tray sides or inner and outer gunnels. Available in two length options. Sold as Pair (2). Color: Black
Learn More -
Blowsion Fuel Tank Fitting
Blowsion Fuel Tank Fitting with Rubber Grommet. 1/4 Hose Barb. Compression Fit. Install with 17/32 Drill Bit.
Part Number: 01-02-598
Learn More -
Mikuni SBN Pump Cover
Genuine Mikuni Replacement Pump Cover for Mikuni SBN Carburetors. Available in Black or Silver.
Learn More -
Jet Renu - Renu Shield 12oz
Our “Shield Renu” is a protective coating made up of a special blend of silicones with fast-drying surfactants which makes the treatment of surfaces fast & easy. This product has a superfine mist that coats all surfaces evenly without sticky build-up or residue. Renu Shield Protects & conditions, vinyl, plastics, leather, rubber, metal, engine components and even wood surfaces. Spray on, wipe off, perfect for hard to reach areas while making plastic look new again with a high gloss shine. Size: 12oz. can.
Part Number: JR-045
Learn More -
Yamaha Fuel Cap Gasket
Aftermarket Yamaha Fuel Cap Gasket. Fits All Yamaha Models PWC. Fits OEM Yamaha and Blowsion Yamaha Billet Fuel Caps. Replaces OEM Yamaha PN# EU0-67832-00-00.
Part Number: 01-07-231
Learn More -
Bilge Switch - Start Stop Switch Mount - Yamaha
Blowsion Bilge Switch Stop / Start Switch Mount - Yamaha. This sano billet switch assembly mounts directly to the bottom of the OEM Start / Stop switch housing of all Yamaha watercraft.
Part Number: 06-01-214
Learn More -
Yamaha Flywheel Puller
Yamaha Flywheel Puller Tool. Fits all two stroke engines (except Kawasaki 900, 1100 and 1200). 12 Hole Disc 8mm Bolts used to remove flywheel unit from the crankshaft
Part Number: 06-04-025
Learn More -
Hydro-Turf Sheet - Dual Layer - Waffle
Dual Layer 2-Tone Sheets of 1/4" (6mm) Hydro-Turf with Cut Waffle Grooves. Available in any two of the color combinations Hydro Turf offers on the below drop down menus.
See our special formulated solvent-based Mat Glue for Installation.
Learn More -
RRP Ninja Chin Pad - Competition
The RRP Ninja Full Carbon Competition Chin Pad Design utilizes a 3-bolt mounting system to avoid any steering system issues. This chin pad requires an RRP Steering Stop based on the rear mounting location. Thinner more streamlined design shape! Fits all RRP Cast, RRP Billet, RRP Lightweight Billet and RRP CBX Pole Models. Available in all color options listed.
Learn More -
Maxima K2 Premix Oil - 5 Gallon
Maxima Premix Oil Formula K2 is a very high performance 100% synthetic 2-cycle lubricant utilizing 2000 centistoke esters along with special additives to achieve outstanding levels of protection and cleanliness. 5 Gallons.
Part Number: 06-03-021
Learn More -
ADA Cylinder Head Dome - Yamaha 701/1100
ADA Racing billet dome for the Yamaha 701 and 1100 engines, includes compression(OR043) and dome top(OR020) orings. Squish relief is .015 inch @ 83mm with a 10.5 degree angle.
Learn More -
Epoxy Welder (2 Part)
Epoxy (2 Part) Welder. This is THE glue for all your PWC needs. Bonds to SMC, Gel Coat, fiberglass, aluminum etc. Creme color- can be tinted. This Methacrylic epoxy is your toolbox's best friend!
Part Number: 06-03-121
Learn More -
OEM Yamaha Throttle Cable - 96+ Superjet
Genuine OEM Yamaha replacement Throttle cable for 1996 to current Yamaha Superjets. 6mm cable ends.
OEM Part Number: GM6-67252-00-00
Learn More