Products
-
OEM Yamaha Short Shaft
Genuine OEM Yamaha Short Shaft. Fits 1995 and Newer Yamaha SuperJet Models.
OEM Part Number: 6R7-51323-02-00
Learn More -
ODI Elite Motion Grips V2.1 Light Blue (130mm)
ODI’s first generation Lock-On System are standard for mountain bike racers everywhere. ODI has redefined grip performance again. The new Elite Series grips are engineered from end to end to deliver every feature racers demand. Color: Light Blue
Part Number: 03-05-432
Learn More -
Footwells - Kickers
Blowsion Kicker Footwells were Designed specifically for the Super Jet and Kawasaki SX-R 800, and used exclusively by Ross Champion on his Factory Blowsion Yamaha SuperJets and Air Darin Anderson on his SXR's and SJ's.
Part Number: 05-03-005
Learn More -
RRP Rickter Hood Forks
RRP Rickter Adjustable Hood Prongs. Machined from billet aluminum with stainless steel pins. Adjustable in their mounting position so you can dial in that hood seal pressure. Fits 1996 and Newer Yamaha Superjets, Rickters, and other aftermarket hulls. Available in anodized Black. Sold as Pair (2)
Part Number: 04-04-377
Learn More -
Mikuni Adjusting T Screws - Yamaha
Mikuni high and low-speed adjuster screws with "T" cross bar - extended length for easy adjustment. Absolutely a must when running aftermarket pipes. Fits all 1996-2020 Yamaha Superjet OEM 38mm Mikuni Carburetors.
Part Number: 01-02-544
Learn More -
OEM Yamaha Battery Power Wire
OEM Yamaha Battery Power Wire Lead. Fits all years Yamaha Superjet, FX1 and Rickter Models.
Part Number: 6R7-82117-11-00
Learn More -
Side Rail Turf Kit - Yamaha SJ / FX1 / KAW 650/750 / Rickter
Blowsion Custom Cut Side Rail Turf Kit. Fits all years Yamaha Superjet, FX1, Polaris Octane, Rickter and Kawasaki 650 and 750 Stand up Models. Improve the traction and looks on the side rails of your ski with our custom fit side rail covering kits. Side Rail Turf Kits Include enough material to cover the front bumper, sides, and rear corners of the side rail. Side rail kits bond directly to the fiberglass. All OEM/Stock plastic will need to be removed prior to application of side rail turf kit. For most applications a Quart of Mat Glue is recommended for installation. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-324
Learn More -
ODI TLD Grips White (130mm)
ODI has enlisted the help of our good friends over at Troy Lee Designs to help put an artistic spin on a quality design. After hundreds of drawings and designs, what has been developed is one of the most innovative ODI grips yet...The ODI TLD Lock-On Grip.
Part Number: 03-05-325
Learn More -
OEM Yamaha 62T Crankcase (for DASA Stock Stroke Cylinder Kits)
Brand new modified OEM Yamaha 62T Crankcases now available from Blowsion for DASA Big Bore Stock Stroke Engine Setups. Includes Case Bore, Epoxy Fill, Trenching and Reinforcement plate for Stock Stroke Crankshafts.
Part Number: 01-03-763
Learn More
OEM Yamaha Crankcase Part Number: 62T-15100-00-00 -
Bilge Fitting 45-Degree
Blowsion 45-Degree machined aluminum bilge fittings are a clean replacement of the bulky plastic fittings usually supplied with aftermarket bilge pump kits. Available in Anodized Black or Clear.
Learn More -
Blowsion Pole Bracket Plate
Blowsion Pole Bracket Plate. Required when installing a Blowsion Billet Handlepole on an older (PRE-2014 DESIGN) Blowsion Dual Hole Handle Pole Bracket. Fits 1996-2020 Yamaha Superjet, 1994-1995 Yamaha FX1, 2002-2004 Polaris Octane, and Kawasaki 750 Models.
Part Number: 03-04-067
Learn More -
Mikuni Low Speed Washer
Genuine Mikuni Replacement Low Speed Aluminum Washer for Mikuni SBN Carburetors. Diagram #27.
Part Number: BN38/172
Learn More -
Factory Pipe Elbow Hose
Blowsion Heavy Duty Elbow Coupling. Super Durability tested Blowsion manufactured pipe elbow replaces the weak existing elbows on the market.
Part Number: 01-01-708
Learn More -
Mikuni Throttle Shaft Rebuild 38MM
Genuine Mikuni replacement throttle valve rebuild kit for Mikuni Super BN 38mm Carburetors. MK-BN/038-TV.
Part Number: 01-02-536
Learn More -
Leak Down Block Off Kit Yamaha (62T)
Blowsion Engine Leak Down Block Off Kit. This is an essential tool for determining engine health. Make sure your fresh rebuilt engine is sealed properly, or use it to diagnose engine and/or tuning issues. Utilize your existing leak down tester or plug your Pop-off pressure gauge into the pulse fitting on your cases and check for air leaks. Includes anodized aluminum plates and rubber gaskets to match. All mounting hardware included. Fits all years 62T 701 engines and 62t 760 engines with a b-pipe manifold.
Part Number: 01-03-816
Learn More