Products
-
Mat Kit - Kawasaki JS400/440/550
Blowsion Custom Cut Mat Kit. Glue it on! Fits all years Kawasaki JS Model 300, 440 and 550/550sx. Includes bottom, tray sides, dash and undermat foam. Check out the new Dual Color Turf option now available! See special formulated solvent-based mat glue for installation. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-137
Learn More -
ADA Cylinder Head - Kawasaki 550SX
ADA Racing Billet Cylinder Head for the 1991-1995 550SX aluminum reed cylinder engine. Head design is all o-rings and does not use a head gasket. The head is designed to be installed with the water outlets on the intake side and has 3 water outlets available. Head shell includes o-rings, brass water fittings and plugs. This head uses the stock studs and nuts.
Learn More -
ODI Vans Grips V2.1 Gum (135mm)
Two California Originals have teamed up to bring you an updated version of one of your favorite grips. The new ODI Vans v2.1 Lock-On Grips feature a new single-clamp design for simplified installation and an updated waffle pattern for better comfort and control. The grips are constructed from ODI’s proprietary materials and are available in six awesome colors with custom checkered clamps in coordinating colors. This modern take on the Vans grip adds updated features to the classic design while still providing the rider with the distinctive feel that they have come to love. Color: Gum
Part Number: 03-05-437 Learn More
-
ODI Reflex Grips V2.1 Army Green (135mm)
We are excited to announce the newest addition to the ODI line up of v2.1 Lock-On Grips – the Reflex grip. Drawing on over 40 years of experience of producing performance-driven grips and feedback from our extensive network of top riders across the globe, the Reflex grips have been engineered to reduce impacts and vibration being passed on to the riders’ hands to allow you to ride more with less pain and fatigue. Color: Army Green
Part Number: 03-05-445
Learn More -
Bilge Pump Hose - 10FT
Blowsion Bilge Pump Hose - 10 Foot Section is plenty for most dual pump and custom applications. Color: Black Only. Hose Diameter (ID): 3/4" inch.
Part Number: 06-01-302
Learn More -
ODI Ruffian Grips Green (130mm)
Available for a limited time only exclusively thru Blowsion! ODI Ruffian 130mm Length No-Flange Lock-On Grip System Starter Pack - Limited Edition (Green).
Part Number: 03-05-311
Learn More -
Bilge Pump - Rule - 500GPH Automatic
Rule 25SA Fully Submersible Bilge Pump, 500 Gallon Per Hour, 12 Volt DC, Automatic Electronic Sensing. Bilge Pump turns on and checks for water approximately every 2-1/2 minutes. If resistance (water) is found, it will run for as long as water is present. When all the water is pumped out, the pump shuts off and returns to its 2-1/2 minute test cycle.
Part Number: 06-01-002
Learn More -
RIVA Pro-Bar 4-Degree W/Crossbar
RIVA PRO-BAR 4-Degree Standup Handlebars are constructed from a proprietary aluminum alloy that offers maximum strength with reduced vibration. High tech finish and premium features make this the ultimate watercraft bar!
Learn More -
Blowsion Colored Hose Kit
Finish the look of your engine compartment with a Blowsion Colored Hose Kit. Hose Kit includes 10 foot lengths of 1/8 Primer, 1/4 Fuel and 3/8 Water lines. Available in Black, Blue, Green, Orange, Red, or Yellow.
Learn More -
ODI Reflex Grips V2.1 Purple (135mm)
We are excited to announce the newest addition to the ODI line up of v2.1 Lock-On Grips – the Reflex grip. Drawing on over 40 years of experience of producing performance-driven grips and feedback from our extensive network of top riders across the globe, the Reflex grips have been engineered to reduce impacts and vibration being passed on to the riders’ hands to allow you to ride more with less pain and fatigue. Color: Purple
Part Number: 03-05-450
Learn More -
ODI TLD Grips Yellow (130mm)
ODI has enlisted the help of our good friends over at Troy Lee Designs to help put an artistic spin on a quality design. After hundreds of drawings and designs, what has been developed is one of the most innovative ODI grips yet...The ODI TLD Lock-On Grip.
Part Number: 03-05-323
Learn More -
GET C1 Hour Meter
The GET C1 Engine Hour Meter keeps track of your engine's service life. The meter fits to any bike in minutes without any wiring needed and detects the engine by identifying wave frequencies that flow through the surface it sits on.
Part Number: 06-04-092
Learn More -
Blowsion Hood Bumper (3 inch)
The Blowsion Hood Bumper is a premium solution to prevent the Handle pole from contacting the hood. For Freestyle and Freeride Applications. Black Diamond. Includes 3M Adhesive Backing.
Part Number: 04-04-206
Learn More -
ODI Elite Motion Grips V2.1 Grey (130mm)
ODI’s first generation Lock-On System are standard for mountain bike racers everywhere. ODI has redefined grip performance again. The new Elite Series grips are engineered from end to end to deliver every feature racers demand. Color: Grey
Part Number: 03-05-429
Learn More -
Throttle Adapter - Yamaha (6mm)
6mm Throttle Cable Adapter. A Throttle Cable Adapter is required to run most aftermarket throttle levers. Fits All Years Yamaha Two Stroke and 2021+ Yamaha Superjet PWC Models. Please see list below for model compatibility.
Part Number: 03-05-242
Learn More