Products
-
DASA Powervalve Engine Stroker (800cc to 1100cc)
DASA Billet Powervalve Stroker Engine. Complete Short Block available in 800cc to 1100cc options. Now available with +8mm & +10mm Forged Crankshafts.
Learn More -
DASA Powervalve Cylinder Kit
Available in 85.00mm, 89.00mm, and 94.00mm Bore Sizes. All Stock Stroke and Stroker Options Available. All DASA Cylinder kits require OEM case modification.
Learn More -
DASA Powervalve Engine Stock Stroke (760cc to 950cc)
Complete Stock Stroke Short Block Engine. Available in 85.00mm, 89.00mm, and 94.00mm Bore Sizes.
Learn More -
3M Marine Grade Silicone Sealant Clear (10oz)
3M Marine Grade Silicone creates a rubbery waterproof seal that remains flexible and is mildew resistant. For sealing Lexan™, Plexiglass™, gelcoat, fiberglass, wood, glass, metal, rubber, and vinyl. Cured sealant remains flexible.
Part Number: 08029
Learn More -
Maxima K2 Premix Oil - 64oz
Maxima Premix Oil Formula K2 is a very high performance 100% synthetic 2-cycle lubricant utilizing 2000 centistoke esters along with special additives to achieve outstanding levels of protection and cleanliness. 64oz / 1.89 Liters.
Part Number: 06-03-022
Learn More -
RRP X-Lite Adjustable Battery Box
RRP X-Lite Billet Fully Adjustable Battery Box to fit most PWC Batteries. Includes EVA Foam Pad (you cut to fit your application). Available in Anodized Black.
Learn More -
ODI Reflex Grips V2.1 Purple (135mm)
We are excited to announce the newest addition to the ODI line up of v2.1 Lock-On Grips – the Reflex grip. Drawing on over 40 years of experience of producing performance-driven grips and feedback from our extensive network of top riders across the globe, the Reflex grips have been engineered to reduce impacts and vibration being passed on to the riders’ hands to allow you to ride more with less pain and fatigue. Color: Purple
Part Number: 03-05-450
Learn More -
Chin Pad Cover - Glove-Fit - 96+ Superjet / FX1 / Octane
Blowsion custom stitched glove-fit chin pad covers for 1996+ Yamaha Superjets, FX1 and Polaris Octane. Specifically designed to fit our Blowsion Carbon Chin Pads but will also fit OEM Yamaha chin pad backing with slight modification to OEM plastic backing and foam padding.
Part Number: 04-01-901
Learn More -
RRP Threaded Safety Rod
Replacement RRP Threaded Safety Rod for RRP Handlepoles. For use with tubes up to 26 Inches. Nuts not included.
Part Number: 03-04-036
Learn More -
Jet Dynamics Ride Plate - Superjet 2008+
JET DYNAMICS Standard length design for riders up to 175 lbs. The premier ride plate for the all around rec rider and racer. Fits 2008 and newer Super Jets. Incredible patented concave design. This puppy rips for chasing your buddies and flatwater freestyle!
Part Number: 02-01-255
Learn More -
OEM Yamaha Starter Relay
Genuine OEM Yamaha Starter Relay. Fits 2002-2020 Yamaha Superjet. See complete list of models below.
Part Number: 68N-81940-00-00 Learn More
-
Primer Bulb Kit - Mikuni Dual
Fits 6mm choke shaft Mikuni dual carburetors. Starting the engine of your personal watercraft is never a problem with a Blowsion primer kit. All brass fittings and Primer Bulb. Get rid of that worthless factory choke and apply a direct shot of fuel! Pair with the Blowsion Dash Fitting for best protection.
Part Number: 01-02-406
Learn More -
ODI Rogue Grips Black (130mm)
The ROGUE 130mm (no flange) black handlebar grips from ODI feature a solid design with a soft rubber shell for maximum traction and comfort. Billet Locking collars on both sides of the grips keep them securely in place.
Part Number: 03-05-307
Learn More -
ODI Cross Trainer Grips Black (130mm)
The ODI Cross Trainer 130mm Lock-On Grip Set features soft comfortable rib patterns interlaced with a thicker criss-cross pattern for a soft feel without a loss in control. Made in the USA!
Part Number: 03-05-370
Learn More -
Blowsion Corporate Sticker 17"
Blowsion Corporate Sticker 17 inch. 12 color combos to choose from. These are not cheezy vinyl. Full screen-printed die cuts with UV protective clear. Show your vanity! Sold Each.
Learn More -
RRP Pole Spacer for Cast Poles
Pole Spacer required for all riders running an extremely tight pole bolt configuration. Prevents cracking or bending of the pole mount end of the handlepole. Fits RRP Cast Handlepole Models Only.
Part Number: 03-04-061
Learn More