Products
-
Handlepole Breather Tubing
Handle Pole Breather Tubing. Fits Blowsion, RRP, and other pole brackets. Available in 2.0" Inch or 2.25" Inch ID. Length: 24" (61cm) Sold Individually.
Learn More -
3M 5200 Marine Adhesive Sealant Fast Cure White (10oz)
If you are looking for a bedding compound with exceptionally strong adhesion, and are not concerned about later removal of hardware, 3M Fast Cure 5200 should be at the top of your list. Along with outstanding adhesion, 3M Fast Cure 5200 remains flexible after it cures and it can be used above or below the waterline. Ideal for underwater thru-hull fittings, hull-to-deck joints, portholes and bonding wood to fiberglass.
Part Number: 06520
Learn More -
Water Bypass Fitting 45-Degree
These Blowsion machined bypass fittings are angled at 45 degrees of flow. Fits 3/8" ID Hose. Offered in Anodized Clear, Black, Red, Blue, Orange and Green.
Learn More -
Pulse Line Fitting 1/4"
Brass Press In Straight Pulse Line Nipple Fitting 1/4" Hose Barb. Use for dual carburetor setups with dual fuel pumps where a second pulse line is required.
Part Number: 01-02-530
Learn More -
ODI Elite Motion Grips V2.1 Black (130mm)
ODI’s first generation Lock-On System are standard for mountain bike racers everywhere. ODI has redefined grip performance again. The new Elite Series grips are engineered from end to end to deliver every feature racers demand. Color: Black
Part Number: 03-05-428
Learn More -
T Fitting 3/8" Barbed - Black
T Hose Fitting 3/8" x 3/8" x 3/8" Barbed. Useful for different types of water routing applications. Color: Black
Part Number: 01-01-069
Learn More -
RRP Rickter Hood Seal MX1
Replacement RRP Rickter Hood Seal. Fits all Rickter MX1 Hull Models.
Part Number: 04-04-410
Learn More -
Tubbie I and II Sponsons - Universal Fit -Screw On
Don't sell that SXI Pro, Yamaha Superjet or Octane to buy an SXR or Hydrospace to be competitive in racing or against your buddies on the waves or lake. The Tubbies are the equalizer.
Learn More -
Exhaust Manifold Gasket - Yamaha 760 (62T)
Yamaha 760 62T Exhaust manifold Gasket.. Replaces OEM Yamaha Part Number 62T-14613-01-00
Part Number: 01-01-735
Learn More -
Factory Pipe B-Pipe Coupler - Heavy Duty
Blowsion manufactured Factory Pipe replacement coupler. This double compound thickness heavy duty silicone exhaust coupler fits "A" and "B" Headpipes including Kawasaki, Yamaha and Polaris Wet pipes. (DIMENSION 4"X 2 1/8") This is NOT the thin blue coupler model offered by other suppliers, but a spec manufactured Blowsion coupler made out of hi-heat silicone hose.
Part Number: 01-01-703
Learn More -
Battery Box Strap - Heavy Duty
Blowsion Heavy Duty Freeride Battery Strap. Much Stronger and slightly shorter than OEM Yamaha straps which takes away the slack when using aftermarket batteries. 10 inches total length (hook to hook).
Part Number: 01-04-604
Learn More -
Mikuni SBN Low-Speed Pilot Jet
Genuine Mikuni SBN Low-Speed Pilot Jets in Stock! Available in all sizes. Sold Each.
Learn More -
Hydro-Turf Lifter Wedges
Inexpensive traction option. Gain control of your ski or runabout by applying these lifter wedges to your tray sides or inner and outer gunnels. Available in two length options. Sold as Pair (2). Color: Black
Learn More -
Mikuni Valve Plate
Genuine Mikuni Replacement Valve Plate for Mikuni SBN Carburetors. Diagram #38.
Part Number: BN34/108-GG
Learn More -
PowerFactor Products - Resonator
PowerFactor Products - Resonator for Powerfactor Exhaust Kit - Available Separately.
Part Number: 01-01-456
Learn More