Products
-
Blowsion OVP Steering System
New Blowsion OVP "Over the Pivot" steering system. Available in Black, Clear, Blue, Orange, Red, Green and Purple bright dip anodized colors! Specifically designed to fit the new Blowsion Billet handlepole.
Learn More -
Epoxy Welder (2 Part)
Epoxy (2 Part) Welder. This is THE glue for all your PWC needs. Bonds to SMC, Gel Coat, fiberglass, aluminum etc. Creme color- can be tinted. This Methacrylic epoxy is your toolbox's best friend!
Part Number: 06-03-121
Learn More -
1/4" Quick Disconnect with Shut-Off Valve
Motion Pro Fuel Shut-Off Valve 1/4" Separating Quick Connect (MP#12-0029).
Learn More -
Blowsion Colored Hose - 1/4 inch
Finish the look of your engine compartment with Blowsion specialty colored 1/4" fuel hose. Available in Clear, Blue, Green, Orange, Red, Yellow, or Black. Quantity is sold by the foot in continuous lengths.
Learn More -
ODI Vans Grips V2.1 Light Blue (135mm)
Two California Originals have teamed up to bring you an updated version of one of your favorite grips. The new ODI Vans v2.1 Lock-On Grips feature a new single-clamp design for simplified installation and an updated waffle pattern for better comfort and control. The grips are constructed from ODI’s proprietary materials and are available in six awesome colors with custom checkered clamps in coordinating colors. This modern take on the Vans grip adds updated features to the classic design while still providing the rider with the distinctive feel that they have come to love. Color: Light Blue
Part Number: 03-05-440 Learn More
-
FP Headpipe Water Screw Kit - Twisters
Blowsion Adjustable T-Handle Factory Pipe Headpipe Water Screw Kit - Standard Size. T-Handle Design provides quick and easy adjustments for tuning. This kit is a direct replacement for those seized up water adjusting screws. Compatible with all Factory Headpipes.
Part Number: 01-01-741
Learn More -
ODI Ruffian Grips Black (120mm)
The ODI Ruffian 120mm (with 3/4 flange) handlebar grips from ODI feature a solid design with a soft rubber shell for maximum traction and comfort. Anodized Billet Locking collars on both sides of the grips keep them securely in place.
Part Number: 03-05-306
Learn More -
RRP Adjustable Hood Latch Assembly
The New Rickter-RRP Hood Latch has been produced for use on all, Rickter standup hulls, Rickter MX1, Yamaha Superjets and any aftermarket hulls using Yamaha based latch systems. This new complete latch features the Rickter-RRP adjustable hood latch allowing you to easily adjust the pressure applied on the hood seal preventing water intrusion. The adjustable hood latch comes complete with all the hardware needed for installation. Available in 2 anodized colors.
Learn More -
Blowsion Cylinder Sleeve - Yamaha 850
Yamaha SuperJet 850 Big Bore Sleeves. Fits 89mm to 91mm Piston. Performance Pre-Ported. To be used with stock stroke through 6 mil stroker motors. Blowsion custom designed include a wider exhaust port, wider boost port, deeper transfers and a narrowed skirt.
Part Number: 01-03-452
Learn More -
Antigravity ATX12-HD RE-START Lithium Battery
The Antigravity ATX12-HD-RS is a hi-power lightweight Lithium battery, built with groundbreaking RE-START Technology (built-in jump-starting) so you won’t ever get stranded with a dead battery again! This is the HEAVY DUTY version of the standard duty ATX12-RS, and offers more capacity/cranking power for those who need it.
Part Number: AG-ATX12-HD-RS
Learn More -
Maxima K2 Premix Oil - 16oz
Maxima Premix Oil Formula K2 is a very high performance 100% synthetic 2-cycle lubricant utilizing 2000 centistoke esters along with special additives to achieve outstanding levels of protection and cleanliness. 16oz / 473ml.
Part Number: 06-03-024
Learn More -
Blowsion Steering System Rebuild Kit
Blowsion Steering System Rebuild kit includes roller bearing, thrust washers, thrust bearing, and large and small O-rings.
Part Number: 03-05-020
Learn More -
Cold Fusion Flywheel Cover Replacement O-Ring
Replacement O-Ring Gasket Seal for the Cold Fusion Yamaha Billet Flywheel Cover.
Part Number: 01-03-358
Learn More -
OEM Yamaha Motor Mount - FX1/WaveBlaster
Genuine OEM Yamaha Motor Mount for FX-1 and WaveBlaster 1. OEM Yamaha Part Number: 62E-44517-A1-8P Learn More -
Blowsion Billet Flywheel Cover (Last Model)
Closeout Sale on Last Years Model. Blowsion Billet Flywheel Cover. Fits all OEM Yamaha Superjet 61X and 62T Crankcases. Stainless Steel Hardware and O-Ring Gasket Seal Included. Limited Quantities/Colors available.
Learn More