Products

Pole Spacer required for all riders running an extremely tight pole bolt configuration. Prevents cracking or bending of the pole mount end of the handlepole. Fits RRP Billet Handlepole Models Only.

Part Number: 03-04-066

The Blowsion Fuel Tank is specially designed to work in conjunction with the aftermarket lay down style exhaust systems that don't work with the OEM Yamaha Fuel Tank (RRP, TNT, PowerFactor). One of the main problems with using these exhaust systems is the battery has to be relocated which can cause quite the problem. The Blowsion Fuel Tank is unique as it has a cut out in the front of the tank that enables you to relocate your battery with ease. Fuel Capacity: 4 Gallons.

Two California Originals have teamed up to bring you an updated version of one of your favorite grips. The new ODI Vans v2.1 Lock-On Grips feature a new single-clamp design for simplified installation and an updated waffle pattern for better comfort and control. The grips are constructed from ODI’s proprietary materials and are available in six awesome colors with custom checkered clamps in coordinating colors. This modern take on the Vans grip adds updated features to the classic design while still providing the rider with the distinctive feel that they have come to love. Color: Red

Part Number: 03-05-441

OEM Yamaha Bedplate - Left Side.

Part Number: 6R7-21415-01-00

Blowsion Handlebar Extensions. Add up to an additional 2 inches to your bars. Trim lines available for custom length options.

Part Number: 03-05-139

ODI has enlisted the help of our good friends over at Troy Lee Designs to help put an artistic spin on a quality design. After hundreds of drawings and designs, what has been developed is one of the most innovative ODI grips yet...The ODI TLD Lock-On Grip.

Part Number: 03-05-329

The all new 2021 Rickter Edge Hull. Whether you are playing at the lake, carving buoys, ripping flat water freestyle, wave riding or freeride the Edge is by far the most versatile hull we have ever built. Years of riding, research, and development have enabled Rickter to construct an incredible hull that excels in all water conditions. The EDGE hulls are available in: Fiberglass (Black or White Base), Visual Carbon Fiber Look, Visual Carbon TeXtreme Look, Full Carbon Fiber and Full Carbon TeXtreme.

PLEASE EMAIL FOR AVAILABILITY

Epoxy (2 Part) - Quart Kits. High performance, gap filling, waterproof, 2 part epoxy designed to provide superior results in footwell installations and hull reinforcement and repair. Easy 1 to 1 mixing ratio keeps it simple for even the beginner.

Part Number: 06-03-123

Rickter Edge Carbon Ride Plate. Fits ALL Rickter Edge FS / FR Hull Models. Three Length Options Available.

Blowsion machined aluminum 3/4 inch bilge fittings are a clean replacement of the bulky plastic fittings usually supplied with aftermarket bilge pump kits. Available in Clear, Black, Green, Red, Blue, Orange and Purple anodized colors.

Blowsion Mat Kit Glue "Blow Goo" to the rescue. Use this solvent-based contact adhesive with your Hydro Turf or stitched mat kit and never worry again about your mats coming loose. Not water-based!

Part Number: 06-03-142

The RRP Rickter 155mm Aluminum Pump Shoe fits all Yamaha Superjet, 1993-1996 WaveBlaster 1, Rickter and most aftermarket Yamaha based hulls.

Part Number: 02-02-431

1/8 NPT x 3/8 Barb 90-Degree Brass Elbow Fitting. Used on Most 2-Stroke PWC.

Part Number: 01-01-076

ODI has enlisted the help of our good friends over at Troy Lee Designs to help put an artistic spin on a quality design. After hundreds of drawings and designs, what has been developed is one of the most innovative ODI grips yet...The ODI TLD Lock-On Grip.

Part Number: 03-05-326

Handle Pole Breather Tubing. Fits Blowsion, RRP, and other pole brackets. Available in 2.0" Inch or 2.25" Inch ID. Length: 24" (61cm) Sold Individually.