Products
-
Maxima K2 Premix Oil - 64oz
Maxima Premix Oil Formula K2 is a very high performance 100% synthetic 2-cycle lubricant utilizing 2000 centistoke esters along with special additives to achieve outstanding levels of protection and cleanliness. 64oz / 1.89 Liters.
Part Number: 06-03-022
Learn More -
Stainless Steel Hose Clamp 2.5"
Heavy Duty Stainless Steel Hose Clamp. Compatible with all 2.0" to 2.75" Inch (OD) Exhaust Couplers. Sold Each.
Part Number: 01-01-176
Learn More -
3M Marine Grade Silicone Sealant Clear (10oz)
3M Marine Grade Silicone creates a rubbery waterproof seal that remains flexible and is mildew resistant. For sealing Lexan™, Plexiglass™, gelcoat, fiberglass, wood, glass, metal, rubber, and vinyl. Cured sealant remains flexible.
Part Number: 08029
Learn More -
Chin Pad Cover - Glove-Fit - 96+ Superjet / FX1 / Octane
Blowsion custom stitched glove-fit chin pad covers for 1996+ Yamaha Superjets, FX1 and Polaris Octane. Specifically designed to fit our Blowsion Carbon Chin Pads but will also fit OEM Yamaha chin pad backing with slight modification to OEM plastic backing and foam padding.
Part Number: 04-01-901
Learn More -
GET C1 Hour Meter
The GET C1 Engine Hour Meter keeps track of your engine's service life. The meter fits to any bike in minutes without any wiring needed and detects the engine by identifying wave frequencies that flow through the surface it sits on.
Part Number: 06-04-092
Learn More -
Blowsion Mat Glue - Pint
Blowsion Mat Kit Glue "Blow Goo" to the rescue. Use this solvent-based contact adhesive with your Hydro Turf or stitched mat kit and never worry again about your mats coming loose. Not water-based!
Part Number: 06-03-141
Learn More -
ODI Elite Motion Grips V2.1 Grey (130mm)
ODI’s first generation Lock-On System are standard for mountain bike racers everywhere. ODI has redefined grip performance again. The new Elite Series grips are engineered from end to end to deliver every feature racers demand. Color: Grey
Part Number: 03-05-429
Learn More -
OEM Yamaha Pump Shoe Seal 144MM
OEM Yamaha Pump Shoe Seal. Fits all OEM Yamaha, Skat-Trak and Solas 144mm Pumps.
Part Number: 6R7-51117-01-00
Learn More -
Blowsion FP Headpipe Bolt Kit - Yamaha
Blowsion Stainless Steel FP Headpipe Bolt Kit. Replace those crusty old factory pipe bolts with these stainless steel socket heads. Kit Includes 3 Bolts, 3 washers and 3 Lock Washers. Fits all Yamaha Style FP Headpipes.
Part Number: 01-01-698
Learn More -
ODI TLD Grips Orange (130mm)
ODI has enlisted the help of our good friends over at Troy Lee Designs to help put an artistic spin on a quality design. After hundreds of drawings and designs, what has been developed is one of the most innovative ODI grips yet...The ODI TLD Lock-On Grip.
Part Number: 03-05-328
Learn More -
Blowsion 1-Piece Head Girdle Kit
Blowsion 1-Piece Cylinder Head Girdle Kit for Yamaha 760 or 701 Engines. All Stainless steel bolts, washers, and girdle hardware included. Compatible with the newly redesigned 2015 Blowsion 1-Piece Yamaha Cylinder Head.
Part Number: 01-03-109
Learn More -
Mat Kit - Kickers - Yamaha Superjet (1996-2020)
Blowsion Custom Cut Mat Kit. Glue it On! Fits all 1996-2020 Yamaha Superjet Models. Includes bottom, tray sides, dash, footwell mat pieces, and undermat foam. Kicker Footwells not included. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-076
Learn More -
Throttle Adapter - Yamaha (6mm)
6mm Throttle Cable Adapter. A Throttle Cable Adapter is required to run most aftermarket throttle levers. Fits All Years Yamaha Two Stroke and 2021+ Yamaha Superjet PWC Models. Please see list below for model compatibility.
Part Number: 03-05-242
Learn More -
Blowsion Flywheel Cover Replacement O-Ring
Replacement O-Ring Gasket Seal for all versions of the Blowsion Billet Flywheel Cover.
Part Number: 01-03-359
Learn More -
Hood Finger Pull - Yamaha Superjet (1990-2020)
Blowsion Billet Hood Finger Pull. Direct replacement for OEM Yamaha Superjet plastic hood finger pulls. Fits all 1990-2020 OEM Yamaha Superjet Hoods. Replaces factory plastic clip. Stellar function and look! Bright dip anodized Black.
Part Number: 04-03-353
Learn More