Products
-
Bilge Pump - Rule - 500GPH
Rule Non-Automatic 500GPH Fully Submersible 12 Volt DC bilge pump. Unmatched in pumping power and longevity. Higher Flow – optimized impeller to provide greater flow at the same amperage. Back Flow Prevention - reduces the amount of water left over in the bilge, reducing odor and helping keep your bilge cleaner. Easy to mount and ready to go!
Part Number: 06-01-001
Learn More -
Undermatting Foam - 18mm Plush
48" x 17.5" section of 18mm thick plush (softer) foam undermat. This our softest underpad. PLUSH offers greater comfort and compression recovery for extreme riders.
Part Number: 04-02-331
Learn More -
Bow Pin with Lanyard & Clip
Heavy Duty Steel Bow Stop Pin with red coated handle. Comes with lanyard and clip.
Part Number: 06-06-152
Learn More -
Jet Renu - Dri Wash Waterless Cleaner & Polish
“Dri Wash” is one of Jet Renu's must have products. Dri Wash quickly and effectively removes dirt and grime from any surface by lifting away the contaminates with its powerful foaming action. Dri Wash not only works great to clean most surfaces without the use of water but it also leaves behind a protective coating and brilliant shine. Environmentally friendly and simple to use, just Spray on Wipe off, cleans, polishes & protects against UV Rays as well as it smells great. When used with a clean microfiber towel Dri Wash will not scratch the surface. Size: 12oz. can
Part Number: JR-1111
Learn More -
Handle Pole Spring - Yamaha Superjet 1996+
Blowsion Heavy duty handlepole spring for the 96+ Yamaha SuperJet / 1994-1995 Yamaha FX1 / Rickter / Polaris Octane / Kawasaki Conversions. Drop in fit and well high tension design for those riders desiring a feather light handlepole.
Part Number: 03-04-012
Learn More -
Mounting Block (2 inch)
Hydro-Turf Mounting Blocks can be used for a variety of applications including: handle pole pads / lifters, footholds and mounting exhausts. Blocks are 2" thick (4.7" x 5.1"). Add 3M self-adhesive for $5.
Learn More -
ODI Ruffian Grips Black (120mm)
The ODI Ruffian 120mm (with 3/4 flange) handlebar grips from ODI feature a solid design with a soft rubber shell for maximum traction and comfort. Anodized Billet Locking collars on both sides of the grips keep them securely in place.
Part Number: 03-05-306
Learn More -
ODI TLD Grips Red (130mm)
ODI has enlisted the help of our good friends over at Troy Lee Designs to help put an artistic spin on a quality design. After hundreds of drawings and designs, what has been developed is one of the most innovative ODI grips yet...The ODI TLD Lock-On Grip.
Part Number: 03-05-326
Learn More -
RIVA Power Filter (2-Stroke)
RIVA Racing's all-new 'cone-style' flame arrestor takes a proven favorite to the next level. Reduced height accommodates low-profile hood designs of freeride standups. Stainless steel cap with integrated velocity cone increases air flow rate and efficiency providing improved throttle response. Proprietary stainless steel mesh filter element resists corrosion and is certified to meet U.S. Coast Guard 'SAE-J1928' standars for safety and reliability. Fits standard carburetor adapters and allows easy access to carburetor adjustment screws. Sold Individually.
Part Number: RY1301-1
Learn More -
OEM Bullet Terminals - 5 Pack
Replacement OEM bullet connectors now available at Blowsion. Kit includes 5 Male and Female terminals with Insulators. Perfect for those super sanitary bilge kit installations or replacements for Electrical box connections.
Part Number: 01-04-417
Learn More -
Blowsion Pro Trim Lever
Launched! - Introducing the 2024 Blowsion Pro Trim Lever. Our new billet Pro Trim Lever sets the standard for quality, rider comfort and cutting edge design while being proudly manufactured and assembled completely in the USA from 6061 Aluminum. This will inspire confidence and comfort whether you are a world champion racer or sending it on the weekend with your friends. Available in anodized Clear, Black, Orange, Red, Blue, Green, Purple and Teal.
Learn More -
Chin Pad Cover - Staple On - 96+ Superjet / FX1 / Octane
Blowsion custom stitched staple-on chin pad covers for 1996+ Yamaha Superjets, FX1 and Polaris Octane.
Part Number: 04-01-601
Learn More -
Bilge Switch - Handlebar Mount - Universal
Universal Handle Bar Mount Bilge Switch. Fits any watercraft handle bars on the market. Anodized Black.
Part Number: 06-01-212
Learn More -
Water Filter Inline 3/8"
Inline Water Filter. Made from impact resistant nylon with 3/8” barb ends. A clear bowl and removable filter screen allow easy inspection and cleaning.
Part Number: 01-01-780
Learn More -
DASA Cylinder Head Dome 89MM-94MM
DASA Billet Cylinder Head Dome for 89MM-94MM bore sizes. Fits DASA Billet Cylinder Heads. Sold Each. Learn More -
1/4" Quick Disconnect / Fuel Restrictor
The 1/4" Quick Disconnect / Fuel Restrictor can be used as fuel line quick disconnect and/or for fuel restriction. Pre-tapped and threaded to accept Mikuni Main Jet (Jets not included). Includes stainless steel hose clamps. Now Available in all colors!
Learn More