Products

Products

Items 33 to 48 of 330 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • Footwells - Kickers

    Blowsion Kicker Footwells were Designed specifically for the Super Jet and Kawasaki SX-R 800, and used exclusively by Ross Champion on his Factory Blowsion Yamaha SuperJets and Air Darin Anderson on his SXR's and SJ's.

    Part Number: 05-03-005

    Learn More
    $189.95

  • ODI AG-1 Grips Black/Grey (135mm)

    ODI’s first generation Lock-On System are standard for racers everywhere. Designed in a partnership with 2-time UCI World Cup Downhill Champion Aaron Gwin, ODI has redefined grip performance again. The new AG-1 grips are engineered from end to end to deliver every feature racers demand.

    Part Number: 03-05-372

    Learn More
    $35.95

  • MSD Spark Plug Boot Retainers

    MSD Spark Plug Boot Retainer Secures the boot to the base of the spark plug.

    Part Number: 01-05-605

    Learn More
    $19.90

  • Turbulator Hardware Kit

    Blowsion Turbulator Chin Pad Hardware Kit. Includes All Hardware required for installation.

    Learn More
    $19.95

  • ODI Elite Motion Grips V2.1 Mint (130mm)

    ODI’s first generation Lock-On System are standard for mountain bike racers everywhere. ODI has redefined grip performance again. The new Elite Series grips are engineered from end to end to deliver every feature racers demand. Color: Mint

    Part Number: 03-05-430

    Learn More
    $29.95

  • Blowsion Chip Brush

    The Blowsion economy chip brush is perfect for Hydro Turf and Stitched Mat glue installations. Learn More
    $1.50

  • Blowsion Colored Hose - 3/8 inch

    Finish the look of your engine compartment with Blowsion specialty colored 3/8" water cooling hose. Available in Clear, Blue, Green, Orange, Red, Yellow, or Black. Quantity is sold by the foot in continuous lengths.

    Learn More
    $3.25

  • Blowsion Steering System Rebuild Kit

    Blowsion Steering System Rebuild kit includes roller bearing, thrust washers, thrust bearing, and large and small O-rings.

    Part Number: 03-05-020

    Learn More
    $19.95

  • Blowsion Pump Shoe - Yamaha 148MM

    The Blowsion 148mm Aluminum Pump Shoe was designed for fitting larger 148mm pumps into both Yamaha Superjet and aftermarket hulls. Using our 148mm shoe vs a 144mm (stock Superjet size) will greatly increase hook up and drive when used in conjunction with 148mm pumps. Fits all years Yamaha Superjet, 1993-1996 WaveBlaster 1, Polaris Octane and Rickters. Mounting holes are not drilled or tapped so installation in the different Yamaha design aftermarket hulls can be facilitated.

    Part Number: 02-02-434

    Learn More
    $169.95

  • Blowsion Handlebar Clamps

    Blowsion Billet aluminum handle bar clamps for 7/8" Inch bars. Sold as a pair (2) with stainless bar clamp screws included. These bar clamps provide the finishing touch to a clean steering system. Now available in all anodized colors!

    Learn More
    $28.50

  • Side Rail Turf Kit - Yamaha SJ / FX1 / KAW 650/750 / Rickter

    Blowsion Custom Cut Side Rail Turf Kit. Fits all years Yamaha Superjet, FX1, Polaris Octane, Rickter and Kawasaki 650 and 750 Stand up Models. Improve the traction and looks on the side rails of your ski with our custom fit side rail covering kits. Side Rail Turf Kits Include enough material to cover the front bumper, sides, and rear corners of the side rail. Side rail kits bond directly to the fiberglass. All OEM/Stock plastic will need to be removed prior to application of side rail turf kit. For most applications a Quart of Mat Glue is recommended for installation. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.

    Part Number: 04-02-324

    Learn More
    $69.95

  • ODI Aluminum Lock Ring Set

    Anodized billet aluminum lock rings from ODI. Custom Blowsion anodized colors to make all your friends jealous. Fits all ODI Lock-On grip system grips. Each package contains 4 lock rings and stainless allen fasteners.

    Learn More
    $17.00

  • T Fitting 3/8" x 3/8" x 3/8"

    Brass Hose Barb Tee Fitting 3/8" x 3/8" x 3/8" for custom water routing applications.

    Part Number: 01-01-080

    Learn More
    $6.95

  • ODI Elite Flow Grips V2.1 Mint (130mm)

    ODI’s first generation Lock-On System are standard for mountain bike racers everywhere. ODI has redefined grip performance again. The new Elite Series grips are engineered from end to end to deliver every feature racers demand. Color: Mint

    Part Number: 03-05-422

    Learn More
    $29.95

  • Blowsion Steering System 1-1/8"

    Blowsion Steering System for 1-1/8" Fat Bars. We have developed the most advanced and universal steering system available for the stand-up watercraft market. With exclusive feedback from our Pro Blowsion Air Force Racers and Freeriders come check it out. Now available in all anodized colors!

    Learn More
    $279.95

  • Bilge Pump - Rule - 500GPH

    Rule Non-Automatic 500GPH Fully Submersible 12 Volt DC bilge pump. Unmatched in pumping power and longevity. Higher Flow – optimized impeller to provide greater flow at the same amperage. Back Flow Prevention - reduces the amount of water left over in the bilge, reducing odor and helping keep your bilge cleaner. Easy to mount and ready to go!

    Part Number: 06-01-001

    Learn More
    $34.95

Items 33 to 48 of 330 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5