Products
-
Flow Control Valve - Pro Series
Flow Control Valve - 3/8" Adjustable Pro Model. This 3/8" valve has been designed to prevent water flow to the waterbox at idle and off idle engine speeds. This allows the craft to be more responsive off the line and around turns. Results are HUGE gains in throttle response. All stainless internal parts. IJSBA race legal. Now Available in all Colors!
Learn More -
OEM Yamaha Motor Mount - Superjet / Rickter
Genuine OEM Yamaha Motor Mounts. Fits all years Yamaha Superjet and Rickter. Why mess around with aftermarket engine mounts that will not last? Sold Individually.
Part Number: 6R7-44517-00-8S
Learn More -
ODI Xtreme Grips Grey (130mm)
Xtreme Grips from ODI. New Graphite Grey Grip design. Starter kits come with Carbon Silver ODI Lock On Clamps and ODI’s new Snap Cap end caps. These grips feature a tapered knurl pattern that is larger and deeper where you need more traction.
Part Number: 03-05-301
Learn More -
ODI TLD Grips Black (130mm)
ODI has enlisted the help of our good friends over at Troy Lee Designs to help put an artistic spin on a quality design. After hundreds of drawings and designs, what has been developed is one of the most innovative ODI grips yet...The ODI TLD Lock-On Grip.
Part Number: 03-05-324
Learn More -
RRP Carbon Fiber Exhaust Kit
New for 2013! RRP Carbon Fiber Exhaust System with Waterbox. Compatible with all Yamaha 701 based engines.
Part Number: 01-04-262
Learn More -
Undermatting Foam - 9mm Plush
48" x 17.5" section of 9mm thick plush (softer) foam undermat. This our softest underpad. PLUSH offers greater comfort and compression recovery for extreme riders.
Part Number: 04-02-328
Learn More -
Blowsion Kick Plate
An ultra bitchin' way to keep your rear edge tray mat wrapped and sealed down. Excellent solution to a problem area for all mat installations. Available for all models.
Learn More -
Blowsion Kustom Cut-Back Stainless Impellers
Increased acceleration, bottom end hook-up and hi-rev grunt are only a few of the advantages of the revolutionary Blowsion Large Magnum Hub cut-back impellers now being offered.
Learn More -
Water Bypass Fitting 90-Degree
Blowsion Billet 90-Degree Water Bypass fittings. Fits 3/8" ID Cooling Hoses. Offered in Anodized Clear, Black, Green, Red, Blue and Orange. All Colors In stock!
Learn More -
DAKINE Footstrap Hardware Kit - w/glue
Now available! Dakine hardware install kit with glue for installing footstraps. Ultra sanitary and leak proof.
Part Number: 04-02-339
Learn More -
Rotary Bilge Switch - 3 Position
Blowsion Rotary waterproof bilge switches are corrosion resistant and have withstood the most abuse we can give them. Pair with the Blowsion Dash Fitting for best protection.
Part Number: 06-01-201
Learn More -
TNT Exhaust Mounting Block
Blowsion TNT Exhaust Mounting Block. The foam blocks are designed to hold the pipe in position so that the coupler and stinger height match up perfectly to the manifold and waterbox. Perfect alignment will help optimize performance and increase longevity of the rubber couplers. Kit includes 3 individual foam blocks with 3M adhesive backing. Compatible with all TNT, RRP Carbon and PowerFactor Style Exhaust Systems.
Part Number: 01-01-168
Learn More -
Chin Pad Cover - Staple On - 96+ Superjet / FX1 / Octane
Blowsion custom stitched staple-on chin pad covers for 1996+ Yamaha Superjets, FX1 and Polaris Octane.
Part Number: 04-01-601
Learn More -
3M 5200 Marine Adhesive Sealant Fast Cure White (10oz)
If you are looking for a bedding compound with exceptionally strong adhesion, and are not concerned about later removal of hardware, 3M Fast Cure 5200 should be at the top of your list. Along with outstanding adhesion, 3M Fast Cure 5200 remains flexible after it cures and it can be used above or below the waterline. Ideal for underwater thru-hull fittings, hull-to-deck joints, portholes and bonding wood to fiberglass.
Part Number: 06520
Learn More -
Jet Dynamics Ride Plate - Superjet 2008+
JET DYNAMICS Standard length design for riders up to 175 lbs. The premier ride plate for the all around rec rider and racer. Fits 2008 and newer Super Jets. Incredible patented concave design. This puppy rips for chasing your buddies and flatwater freestyle!
Part Number: 02-01-255
Learn More -
Blowsion Fuel Tank
The Blowsion Fuel Tank is specially designed to work in conjunction with the aftermarket lay down style exhaust systems that don't work with the OEM Yamaha Fuel Tank (RRP, TNT, PowerFactor). One of the main problems with using these exhaust systems is the battery has to be relocated which can cause quite the problem. The Blowsion Fuel Tank is unique as it has a cut out in the front of the tank that enables you to relocate your battery with ease. Fuel Capacity: 4 Gallons.
Learn More