Products
-
Water Filter Inline 3/8"
Inline Water Filter. Made from impact resistant nylon with 3/8” barb ends. A clear bowl and removable filter screen allow easy inspection and cleaning.
Part Number: 01-01-780
Learn More -
Blowsion Fuel Tank
The Blowsion Fuel Tank is specially designed to work in conjunction with the aftermarket lay down style exhaust systems that don't work with the OEM Yamaha Fuel Tank (RRP, TNT, PowerFactor). One of the main problems with using these exhaust systems is the battery has to be relocated which can cause quite the problem. The Blowsion Fuel Tank is unique as it has a cut out in the front of the tank that enables you to relocate your battery with ease. Fuel Capacity: 4 Gallons.
Learn More -
Blowsion Billet Pivot Bolt - Yamaha
Lightweight Billet Handle Pole Bolt. Weighing in at an amazing 90 grams, the Blowsion 7072 Hardened Billet aluminum handlepole bolt is 1/3rd the weight of the OEM pole bolt.
Part Number: 03-04-144
Learn More -
OEM Yamaha 62T Crankcase (for DASA Stock Stroke Cylinder Kits)
Brand new modified OEM Yamaha 62T Crankcases now available from Blowsion for DASA Big Bore Stock Stroke Engine Setups. Includes Case Bore, Epoxy Fill, Trenching and Reinforcement plate for Stock Stroke Crankshafts.
Part Number: 01-03-763
Learn More
OEM Yamaha Crankcase Part Number: 62T-15100-00-00 -
Blowsion Mat Glue - Quart
Blowsion Mat Kit Glue "Blow Goo" to the rescue. Use this solvent-based contact adhesive with your Hydro Turf or stitched mat kit and never worry again about your mats coming loose. Not water-based!
Part Number: 06-03-142
Learn More -
Primer Bulb
Try the sanitary "non foot destroying" rubber-based bulb type primer. In stock and ready to flow! Pair with the Blowsion Dash Fitting for best protection.
Part Number: 01-02-411
Learn More -
Mat Kit - Stitched - Kicker Footwells - Yamaha Superjet (1996-2020)
Glue On! Includes bottom, sides, dash and undermat foam. Fits all years 1996-2020 Yamaha Superjet Models with Kicker Composite Footwells. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-083
Learn More -
Steering Cable Extension - HD
Blowsion Stainless Steel Steering Cable Extension. Compatible with our Yamaha Superjet and Kawasaki SXR Heavy Duty Steering Cables.
Part Number: 03-04-211
Learn More -
Blowsion Pump Bolt Kit
Blowsion Stainless Steel Pump Bolt Kit for all Yamaha Superjet and Rickter Models. The Socket Head Bolt design allows for use of hex key tool which results in much easier access. A Great replacement for OEM Yamaha Part Number: 90119-10948-00. Kit Includes 4 Bolts and 4 Washers.
Part Number: 02-02-478
Learn More -
Blowsion Shortened Turnplate
Experience the improved ride and benefits of having an adjustable and shortened handlepole length without replacing your handlepole. The Blowsion billet shortened length turn plate can be combined with an OEM or aftermarket handlepole to create the perfect rider setup. Color: Anodized Black.
Part Number: 03-05-043
Learn More -
OEM Yamaha 62T Crankcase (for DASA +12mm Stroker Cylinder Kits)
OEM Yamaha 62T Crankcase Machined for DASA +12mm Stroker Cylinder Kits.
Part Number: 01-03-766
Learn More -
Coupler Dampener - Yamaha / Kawasaki
Rubber Coupler Dampener for use with Blowsion billet Yamaha Superjet and Kawasaki aftermarket Drive Couplers.
Part Number: 02-02-205
Learn More -
Small Fuel Tank - For PF/RRP Pipe
Reduced size 8.5 Liter (2.25 Gal) fuel tank. Less weight- required when using TNT, RRP or PowerFactor Pipes. Specially designed fuel tank incorporates lower baffle section to reduce fuel sloshing guaranteeing uninterrupted fuel supply. Comes equipped with Dual Fuel Pickups, Fuel Pickup Filters and Fuel Tank Fittings for Gas Tank Vent and Return Lines.
Learn More -
Chin Pad Cover - Glove-Fit - 96+ Superjet / FX1 / Octane
Blowsion custom stitched glove-fit chin pad covers for 1996+ Yamaha Superjets, FX1 and Polaris Octane. Specifically designed to fit our Blowsion Carbon Chin Pads but will also fit OEM Yamaha chin pad backing with slight modification to OEM plastic backing and foam padding.
Part Number: 04-01-901
Learn More -
Handlepole Breather Tubing
Handle Pole Breather Tubing. Fits Blowsion, RRP, and other pole brackets. Available in 2.0" Inch or 2.25" Inch ID. Length: 24" (61cm) Sold Individually.
Learn More -
Blowsion Superjet Heavy Duty Steering Cable
The Blowsion Yamaha Superjet Heavy Duty Steering Cable incorporates Blue Max control cable construction. This superior control cable material is born of marine and aviation engineering design, with extreme low friction and minimal loss of motion. Fits all 1996-2007 Yamaha Superjet and most aftermarket hull applications using Yamaha based platform (Rickter, Krash, Tigercraft, ETC). Now available in 3 lengths options for shorter aftermarket hulls.
Learn More