Products
-
Blowsion Corporate T-Shirt - Lapis Blue
Blowsion Corporate Logo T-Shirt. Unisex Sizing. Available in all sizes. Color: Lapis Blue.
Learn More -
Blowsion Handlebar Clamps
Blowsion Billet aluminum handle bar clamps for 7/8" Inch bars. Sold as a pair (2) with stainless bar clamp screws included. These bar clamps provide the finishing touch to a clean steering system. Now available in all anodized colors!
Learn More -
Blowsion Pump Shoe - Yamaha 148MM
The Blowsion 148mm Aluminum Pump Shoe was designed for fitting larger 148mm pumps into both Yamaha Superjet and aftermarket hulls. Using our 148mm shoe vs a 144mm (stock Superjet size) will greatly increase hook up and drive when used in conjunction with 148mm pumps. Fits all years Yamaha Superjet, 1993-1996 WaveBlaster 1, Polaris Octane and Rickters. Mounting holes are not drilled or tapped so installation in the different Yamaha design aftermarket hulls can be facilitated.
Part Number: 02-02-434
Learn More -
Blowsion Snapback Since89 Hat - Charcoal/Black
Blowsion Snapback Since89 Hat. Richardson 168 7 Panel Charcoal with Black mesh back. Color: Charcoal/Black
Part Number: 07-02-561
Learn More -
Primer Bulb
Try the sanitary "non foot destroying" rubber-based bulb type primer. In stock and ready to flow! Pair with the Blowsion Dash Fitting for best protection.
Part Number: 01-02-411
Learn More -
Blowsion SS Jet Ski Cover - Yamaha WaveBlaster 1 (1993-1996)
Blowsion Stealth Series PWC Jet Ski Covers. No more cover flapping on the freeway. Weather resistant material with special UV coating. Engineered for a custom fit for each PWC model. Fits all 1993-1996 Yamaha WaveBlaster 1 Models. Color: Stealth Black.
Part Number: 06-06-040
Learn More -
Blowsion Pole Bracket - Kawasaki 440/550
When our design department set out to build the ultimate JS handlepole bracket we had to drop them in a time machine as they were not even born when the original JS skis hit the water. Our goal was to honor the classic styling of the OG while giving it a futuristic facelift. The result is best described as the DeLorean of brackets but cooler. Crafted from billet aluminum that’s practically an area 51 secret, this bracket is more high-tech than your neighbors smart fridge. Ok, let’s get serious for a second. This bracket will allow you to install most aftermarket handlepoles including (Blowsion & RRP) on JS hulls when using Yamaha bushing spacing. Installing this beast will make you the envy of the beach whether you are cranking buoys or subs! Fits all Kawasaki 300, 440 and 550 JS Hulls.
Learn More -
DAKINE Footstrap Hardware Kit
Now available! Dakine hardware install kit for installing footstraps. Ultra sanitary and leak proof.
Part Number: 04-02-338
Learn More -
Bilge Fitting 45-Degree
Blowsion 45-Degree machined aluminum bilge fittings are a clean replacement of the bulky plastic fittings usually supplied with aftermarket bilge pump kits. Available in Anodized Black or Clear.
Learn More -
Mat Kit - Stitched - Freestyle Lifters - Kawasaki SXR 800
Glue On! Includes bottom, sides, dash and undermat foam. Available for OEM or Composite Railcaps. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Learn More -
Mat Kit - Kickers - Kawasaki SXR 800
Blowsion Custom Cut Mat Kit. Glue it On! Fits all years Kawasaki SXR with Kicker Footwells. Kit Includes bottom, tray sides, dash and undermat foam. Available in Single Color, Dual Layer Diamond or Waffle. Kicker Footwells are not included. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Learn More -
Blowsion Shortened Turnplate
Experience the improved ride and benefits of having an adjustable and shortened handlepole length without replacing your handlepole. The Blowsion billet shortened length turn plate can be combined with an OEM or aftermarket handlepole to create the perfect rider setup. Color: Anodized Black.
Part Number: 03-05-043
Learn More -
Blowsion OVP Steering System Rebuild Kit
Steering System Rebuild Kit for the Blowsion OVP Steering System. Kit Includes all replacement Bearings, Thrust Washers and O-rings.
Part Number: 03-05-030
Learn More -
Blowsion Repeater T-Shirt
Blowsion Repeater Short Sleeve T-Shirt. Unisex Sizing. Available in all sizes. Color: Asphalt.
Learn More -
Blowsion Scissor Stand - Standup
Gusseted and welded heavy duty aluminum construction with easily fold-able hinged design make transportation and storage simple and sanitary.
Part Number: 06-05-005
Learn More -
Blowsion Rickter Pole Bracket Plate
Blowsion Rickter Pole Bracket Plate. Required when installing a Blowsion Billet Handlepole on a RRP Rickter 2 Hole Pole Bracket.
Part Number: 03-04-068
Learn More