Products
-
Mat Kit - Stitched - Freestyle Lifters - Yamaha Superjet (1996-2020)
Complete 4 Piece Replacement Custom Stitched Mat Kit: Includes Bottom, Sides with Integrated Lifter Bumps, Dash and Undermat Foam. Fits Yamaha Superjet (1996-2020). Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-084
Learn More -
Blowsion Steering Stop
Blowsion stainless Steering Stop and nut. Updated design allows for two mounting positions for riders wanting more steering throw. Fits all OEM, UMI,Factory Yamaha, RRP and AC aluminum Handlepoles.
Part Number: 03-04-131
Learn More -
Blowsion Billet Fuel Rail
Blowsion Billet Carburetor Fuel Rail. Fits all Mikuni SBN 44mm, 46mm Dual Carburetors. All Stainless Mounting hardware included. Available in all Anodized colors!
Learn More -
Mat Kit - Diggers - Kawasaki 750
Blowsion Custom Cut Mat Kit. Glue it On! Fits all Kawasaki 750SX, SXi and SXi-Pro Models with Digger Footwells. Includes bottom, tray sides, dash, footwell mat pieces, and undermat foam. Digger footwells not included. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-002
Learn More -
Blowsion Pole Bracket Superjet 1990-1995
Blowsion Billet 6061 aluminum replacement for the cast factory OEM bracket on all 1995 and older Yamaha Super Jets. Oversize length of breather tubing included. Includes oversize cable routing hole for installing the handlepole breather tubing. Blowsion design also includes handlepole spring mounting hole for riders that desire a light pole set up. Totally sanitary and necessary upgrade from the feeble cast aluminum OEM bracket.
Part Number: 03-03-002
Learn More -
Kawasaki Ultra Mirror Block Off Kit
Kawasaki Ultra Model 250/260/300/310 Mirror Block Offs.Lightweight carbon coated epoxy plates cover openings left in hood when mirrors are removed for competition.
Part Number: 04-04-501
Learn More -
Blowsion Steering Cable Bracket - Yamaha Superjet 2021+
The Blowsion Steering Cable Bracket for the 2021 and newer Yamaha Superjet allows for the relocation of the steering cable resulting in a more positive steering experience. Accelerates steering response and dramatically improves the slow turning characteristic within the 4-stroke Yamaha Superjet. Requires the use of Blowsion Superjet Heavy Duty Steering Cable (Standard Length) Part # 02-05-302 (Sold Separately).
Part Number: 03-04-199
Learn More -
Fuel Tank Check Valve 1/4"
Allows air to flow in one direction. 1/4" Barbed ends. Available in clear/black only.
Part Number: 01-02-554
Learn More -
Mikuni 46MM Dual Carburetor Kit
Dual Mikuni 46mm SBN Carburetor Kit. Linked and Custom Jetted to your engine specification. Available in 5 color options!
Learn More -
Blowsion Freeride V-Neck T-Shirt Women's
Blowsion Freeride Short Sleeve V-Neck T-Shirt Women's. Color: White.
Learn More -
Primer Kit - Keihin Single
Fits 8mm choke shaft Keihin single carburetors. Starting the engine of your personal watercraft is never a problem with a Blowsion primer kit. All brass fittings and bulletproof plunger. Get rid of that worthless factory choke and apply a direct shot of fuel!
Part Number: 01-02-403
Learn More -
Blowsion SS Jet Ski Cover - Kawasaki 650SX
Blowsion Stealth Series PWC Jet Ski Covers. No more cover flapping on the freeway. Weather resistant material with special UV coating. Engineered for a custom fit for each PWC model. Fits all 1986-1993 Kawasaki 650SX Models. Color: Stealth Black.
Part Number: 06-06-036
Learn More -
Blowsion Snapback Since89 Hat - Heather/Black
Blowsion Snapback Since89 Hat. Richardson 168 7 Panel Heather Grey with Black mesh back. Color: Heather/Black
Part Number: 07-02-560
Learn More -
Blowsion Hood Seal
Heavy Duty Replacement Hood Seal. Fits all years Yamaha Super Jet, Yamaha FX-1, all years Polaris Octane, Yamaha Wave Blaster and most aftermarket hulls. Dimensions: L 2.7m x W 16mm x H 19mm.
Part Number: 04-04-411
Learn More -
Bilge Pump Mount - Kawasaki JS440/550
The Blowsion Bilge Pump Mount is designed to mount the Rule Bilge Pump (Sold Separately). Includes rivets to mount bilge pump strainer to bracket. Fits all Kawasaki JS440 and JS550 Models. Material: Aluminum. Color: Anodized Black.
Part Number: 06-01-105
Learn More -
Bilge Pump Dual Mount - Kawasaki
Dual bilge pump mounting bracket for Kawasaki Sxi Pro and KAWASAKI SXR 800. The bracket locates the pumps within millimeters from the base of the KAWI hull. Easy built in installation, no messy adhesives. Material: Aluminum. Color: Anodized Black.
Part Number: 06-01-101
Learn More