Products

The Blowsion 148mm Aluminum Pump Shoe was designed for fitting larger 148mm pumps into both Yamaha Superjet and aftermarket hulls. Using our 148mm shoe vs a 144mm (stock Superjet size) will greatly increase hook up and drive when used in conjunction with 148mm pumps. Fits all years Yamaha Superjet, 1993-1996 WaveBlaster 1, Polaris Octane and Rickters. Mounting holes are not drilled or tapped so installation in the different Yamaha design aftermarket hulls can be facilitated.

Part Number: 02-02-434

Blowsion 45-Degree machined aluminum bilge fittings are a clean replacement of the bulky plastic fittings usually supplied with aftermarket bilge pump kits. Available in Anodized Black or Clear.

Blowsion Stainless Steel Socket Head Bolt Kit for Mikuni Super BN Carburetors. The Socket Head Bolt design allows for use of hex key tool which results in much easier access. Replace those easy to strip Mikuni phillips head screws before it is too late!

Part Number: 01-02-547

Allows rider to retrofit Blowsion, UMI and many other steering system turn plates on the market to run the Blowsion Straight Fat, 4-Degree Fat and Fat Riser Bars.

Part Number: 03-05-018

The Blowsion Klowner Footwells were designed especially for the rider who need MAX room in the tray. These hand-laid, molded fiberglass insets provide extended room in the tray of your ski to position your feet. Comfortably sized for large to very large feet.

Part Number: 05-03-007

Replacement OEM bullet connectors now available at Blowsion. Kit includes 5 Male and Female terminals with Insulators. Perfect for those super sanitary bilge kit installations or replacements for Electrical box connections.

Part Number: 01-04-417

Finish the look of your engine compartment with Blowsion specialty colored 1/4" fuel hose. Available in Clear, Blue, Green, Orange, Red, Yellow, or Black. Quantity is sold by the foot in continuous lengths.

Brass Hose Barb Tee Fitting 3/8" x 3/8" x 3/8" for custom water routing applications.

Part Number: 01-01-080

For all Yamaha Super Jets 1995 and older SJ's. Reworked and ready for action-- Powder coated Black.

Part Number: 03-04-011

Now available! Dakine hardware install kit for installing footstraps. Ultra sanitary and leak proof.

Part Number: 04-02-338

Blowsion Stealth Series PWC Jet Ski Covers. No more cover flapping on the freeway. Weather resistant material with special UV coating. Engineered for a custom fit for each PWC model. Fits all 1990-1995 Yamaha Superjet Squarenose Models. Color: Stealth Black.

Part Number: 06-06-041

Replace that cracked and worn out stock plastic battery box with bulletproof Blowsion aluminum. Each box includes all stock location retaining clips for easy exchange. Padded bottom. Direct fit replacement for all years Yamaha Super Jet, FX1 and Polaris Octane. Can be fit as replacement to all Years Kawasaki 750 and SXR 800 with minor battery strap modifications. Color: Anodized Black

Part Number: 01-04-601

Blowsion Engine Leak Down Block Off Kit. This is an essential tool for determining engine health. Make sure your fresh rebuilt engine is sealed properly, or use it to diagnose engine and/or tuning issues. Utilize your existing leak down tester or plug your Pop-off pressure gauge into the pulse fitting on your cases and check for air leaks. Includes anodized aluminum plates and rubber gaskets to match. All mounting hardware included. Fits all years 62T 701 engines and 62t 760 engines with a b-pipe manifold.

Part Number: 01-03-816

Gusseted and welded heavy duty aluminum construction with easily fold-able hinged design make transportation and storage simple and sanitary.

Part Number: 06-05-005

Blowsion Carbon composite tank holder keeps the tank from sliding around in the bottom of a hull during freestyle maneuvers. Available for Small Fuel Tank and OEM/ColdFusion Yamaha Fuel Tanks.