Products
-
Blowsion Steering Stop
Blowsion stainless Steering Stop and nut. Updated design allows for two mounting positions for riders wanting more steering throw. Fits all OEM, UMI,Factory Yamaha, RRP and AC aluminum Handlepoles.
Part Number: 03-04-131
Learn More -
Blowsion Billet Fuel Rail
Blowsion Billet Carburetor Fuel Rail. Fits all Mikuni SBN 44mm, 46mm Dual Carburetors. All Stainless Mounting hardware included. Available in all Anodized colors!
Learn More -
Blowsion Pole Bracket Superjet 1990-1995
Blowsion Billet 6061 aluminum replacement for the cast factory OEM bracket on all 1995 and older Yamaha Super Jets. Oversize length of breather tubing included. Includes oversize cable routing hole for installing the handlepole breather tubing. Blowsion design also includes handlepole spring mounting hole for riders that desire a light pole set up. Totally sanitary and necessary upgrade from the feeble cast aluminum OEM bracket.
Part Number: 03-03-002
Learn More -
Mat Kit - Diggers - Kawasaki 750
Blowsion Custom Cut Mat Kit. Glue it On! Fits all Kawasaki 750SX, SXi and SXi-Pro Models with Digger Footwells. Includes bottom, tray sides, dash, footwell mat pieces, and undermat foam. Digger footwells not included. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-002
Learn More -
Kawasaki Ultra Mirror Block Off Kit
Kawasaki Ultra Model 250/260/300/310 Mirror Block Offs.Lightweight carbon coated epoxy plates cover openings left in hood when mirrors are removed for competition.
Part Number: 04-04-501
Learn More -
Pole Bushings - OEM Kawasaki
Blowsion manufactured delrin heavy duty pivot bolt bushings. Fits all OEM Kawasaki 750 and SXR Handlepoles. Quantity two bushings included per kit.
Part Number: 03-04-103
Learn More -
Blowsion Billet Intake Grate - Yamaha Superjet 2021+
Many processes work together to keep Earth's water moving through its cycle. Blowsion’s R&D team explored the same Hydrologic Cycle to bend water to the upper most regions of the Superjet pump, no small challenge! This resulted in a multi fin design capable of maximizing pump load (AKA reduced pump cavitation) for cornering while maintaining straight line speed and stability. Additionally our engineers developed two fin orientations (3-Fin & 5-Fin) for varying water conditions and or rider preferences. In a nutshell these things kick-ass and won multiple moto’s at the 2021 IJSBA World Finals!
Learn More -
Pump Cone - Kawasaki
Designed with the freestyler in mind, the freestyle pump cone allows the engine to rev faster for the big tricks. Fits all years Kawasaki SXR, 750SX, SXI, SXi-Pro, X2 and 650SX Models.
Part Number: 02-02-405
Learn More -
Blowsion Boxed T-Shirt - Black/Pink
Blowsion Corporate Boxed Logo Short Sleeve T-Shirt. Unisex Sizing. Available in all sizes. Color: Black with Pink/Grey Logo.
Learn More -
Blowsion SS Jet Ski Cover - Kawasaki 650SX
Blowsion Stealth Series PWC Jet Ski Covers. No more cover flapping on the freeway. Weather resistant material with special UV coating. Engineered for a custom fit for each PWC model. Fits all 1986-1993 Kawasaki 650SX Models. Color: Stealth Black.
Part Number: 06-06-036
Learn More -
Blowsion Hood Seal
Heavy Duty Replacement Hood Seal. Fits all years Yamaha Super Jet, Yamaha FX-1, all years Polaris Octane, Yamaha Wave Blaster and most aftermarket hulls. Dimensions: L 2.7m x W 16mm x H 19mm.
Part Number: 04-04-411
Learn More -
Blowsion Snapback Since89 Hat - Heather/Black
Blowsion Snapback Since89 Hat. Richardson 168 7 Panel Heather Grey with Black mesh back. Color: Heather/Black
Part Number: 07-02-560
Learn More -
Bilge Pump Dual Mount - Kawasaki
Dual bilge pump mounting bracket for Kawasaki Sxi Pro and KAWASAKI SXR 800. The bracket locates the pumps within millimeters from the base of the KAWI hull. Easy built in installation, no messy adhesives. Material: Aluminum. Color: Anodized Black.
Part Number: 06-01-101
Learn More -
Mat Kit - Stitched - Digger Footwells - Yamaha Superjet (1990-1995)
Glue On! Includes bottom, sides, dash and undermat foam. Fits all years 1990-1995 Yamaha Superjet Models with Digger Composite Footwells. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-069
Learn More -
Bilge Pump Mount - Kawasaki JS440/550
The Blowsion Bilge Pump Mount is designed to mount the Rule Bilge Pump (Sold Separately). Includes rivets to mount bilge pump strainer to bracket. Fits all Kawasaki JS440 and JS550 Models. Material: Aluminum. Color: Anodized Black.
Part Number: 06-01-105
Learn More -
Battery Box Strap - Heavy Duty
Blowsion Heavy Duty Freeride Battery Strap. Much Stronger and slightly shorter than OEM Yamaha straps which takes away the slack when using aftermarket batteries. 10 inches total length (hook to hook).
Part Number: 01-04-604
Learn More