Products
-
Flow Control Valve - Pro Series
Flow Control Valve - 3/8" Adjustable Pro Model. This 3/8" valve has been designed to prevent water flow to the waterbox at idle and off idle engine speeds. This allows the craft to be more responsive off the line and around turns. Results are HUGE gains in throttle response. All stainless internal parts. IJSBA race legal. Now Available in all Colors!
Learn More -
Blowsion Billet Flywheel Cover
Blowsion Billet Flywheel Cover. Fits all OEM Yamaha Superjet 61X and 62T Crankcases. Stainless Steel Hardware and O-Ring Gasket Seal Included. Available in all colors!
Learn More -
Blowsion Pump Shoe - Yamaha 144MM
Blowsion Aluminum Pump Shoe for Yamaha 144mm Pumps. Replace that easily broken OEM plastic intake duct with this unbreakable aluminum replacement. Fits all years Yamaha Superjet, 1993-1996 WaveBlaster 1, Polaris Octane and Rickters. Mounting holes are not drilled or tapped so install in the different Yamaha design aftermarket hulls can be facilitated.
Part Number: 02-02-432
Learn More -
Throttle Cable Drum
Billet aluminum throttle drum for maximum throttle adjustments. Machined from 6061-T6 aluminum and anodized for corrosion protection. Features 9 different hole locations for the throttle cable to attach. Now available in 5 different colors!
Learn More -
3/8" Quick Disconnect / Water Restrictor
The 3/8" Quick Disconnect / Water Restrictor can be used as Quick Disconnect or use one of 3 supplied brass inserts to restrict the flow of water or increase pressure where it is needed. Includes 3 brass restrictors and stainless steel hose clamps. Now Available in all colors!
Learn More -
Rotary Bilge Switch - 3 Position
Blowsion Rotary waterproof bilge switches are corrosion resistant and have withstood the most abuse we can give them. Pair with the Blowsion Dash Fitting for best protection.
Part Number: 06-01-201
Learn More -
Blowsion 1-Piece Cylinder Head - Yamaha
New low cost one piece billet cylinder head. Anodized for corrosion protection with Blowsion Engraved logos. For 701 / 760 / 850 Yamaha Engines. NOTE: Cylinder Head Domes, Optional Hardware Kit, Optional Girdle Kit and Optional Color Anodized Head Insert are all sold separately.
Learn More -
Blowsion Pro Throttle Lever
We have taken one of the oldest aftermarket products in our industry and refined every element imaginable. Introducing the 2023 Blowsion Pro Throttle Lever. Our new billet adjustable Pro Lever sets the standard for quality, rider comfort and cutting edge design while being proudly manufactured and assembled completely in the USA from 6061 Aluminum. Available for all models. Available in anodized Clear, Black, Orange, Red, Blue, Green, Purple and Teal. Also available as a two finger lever option here.
Learn More -
Oil Injection Block Off Plate
Oil block-off plates allow for an easy conversion from factory oil injection to pre-mixing your own fuel. Block-off plates fit all Yamaha 650701/760 and Kawasaki 650/750 Models. Hardware included. Anodized Black.
Part Number: 01-03-812
Learn More -
Hi-Torque Starter Motor - Yamaha
We have worked diligently to manufacture a hi-torque alternative to the super high quality, but exhorbitantly priced OEM Kawasaki and Yamaha starters. These beauties feature polished commutators with hi tensile bearings and bushings, sintered copper and carbon/graphite brushes, and stainless hardware.
Part Number: 01-04-155
Learn More -
Blowsion SS Jet Ski Cover - Yamaha WaveBlaster 1 (1993-1996)
Blowsion Stealth Series PWC Jet Ski Covers. No more cover flapping on the freeway. Weather resistant material with special UV coating. Engineered for a custom fit for each PWC model. Fits all 1993-1996 Yamaha WaveBlaster 1 Models. Color: Stealth Black.
Part Number: 06-06-040
Learn More -
Blowsion Pro Throttle Lever Only (Two Finger)
Blowsion Two Finger Pro Throttle Lever Only. Compatible with Blowson Pro Throttle Lever Assemblies. Also available in One Finger Version here.
Learn More -
OEM Yamaha 62T Crankcase (for DASA Stroker Cylinder Kits)
Brand new modified OEM Yamaha 62T Crankcases now available from Blowsion for DASA Big Bore Stroker Engine Setups. Includes Case Bore, Epoxy Fill, Trenching and Stroker Case Reinforcement plate for +5mm, +6mm, 8mm and +10mm stroker crankshafts.
Part Number: 01-03-762
Learn More -
Primer Bulb Kit - Mikuni Single
Fits 6mm choke shaft Mikuni single carburetor. Starting the engine of your personal watercraft is never a problem with a Blowsion primer kit. All brass fittings and Primer Bulb. Get rid of that worthless factory choke and apply a direct shot of fuel! Pair with the Blowsion Dash Fitting for best protection.
Part Number: 01-02-405
Learn More -
Tow Loop - Bow Eye Mount Cable
Newly Designed. Easily allows tow watercraft to clip and go. Surf riders and racers are insane to ride without one of these. The ONLY way to effectively guarantee avoiding the next big wave set or the next racer on the course.
Part Number: 04-03-069
Learn More -
Water Filter Inline 3/8"
Inline Water Filter. Made from impact resistant nylon with 3/8” barb ends. A clear bowl and removable filter screen allow easy inspection and cleaning.
Part Number: 01-01-780
Learn More