Products
-
Base Gasket - Yamaha 650/701/760
Fits all OEM Yamaha 650, 701 and 760 Models. OEM thickness (0.020"). Replaces OEM Yamaha Base Gasket Part Numbers: 6M6-11351-A1-00, 6M6-11351-A2-00
Part Number: 01-03-323
Learn More -
OEM Yamaha Woodruff Key
OEM Yamaha Flywheel Woodruff Key.
Part Number: 90280-05001-00 Learn More
-
Handlepole Mount Reinforcing Plate
Blowsion Handle Pole Bracket Reinforcement Plate. Fits all models of 1996-2019+ Yamaha SuperJet and all Polaris Octane. Works with OEM and aftermarket Yamaha and Blowsion design pole brackets to disperse the load from aerial and ocean moves. Made of solid laser cut 5 mm thick aluminum this is the best damage control accessory we can recommend for those riders that shred the big stuff. Installs on underside of pole mount area using current hardware. Helps prevents existing cracks from spreading.
Part Number: 03-04-065
Learn More -
Blowsion Pole Bracket Plate
Blowsion Pole Bracket Plate. Required when installing a Blowsion Billet Handlepole on an older (PRE-2014 DESIGN) Blowsion Dual Hole Handle Pole Bracket. Fits 1996-2020 Yamaha Superjet, 1994-1995 Yamaha FX1, 2002-2004 Polaris Octane, and Kawasaki 750 Models.
Part Number: 03-04-067
Learn More -
Mat Kit - Diggers - Yamaha FX1
Blowsion Custom Cut Mat Kit. Glue it On! Fits all 1994-1995 Yamaha FX-1 Models with Digger Footwells. Includes bottom, tray sides, dash, footwell mat pieces, and undermat foam. Digger Footwells not included. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-053
Learn More -
NGK Spark Plugs - Solid Tip - BR8HS
NGK Spark Plugs - Solid Tip BR8HS. Multi-Ground Electrodes Improve Ignition Capabilities and are Less Sensitive to Increased Voltage Requirements Due to Gap Growth. Designed to Specific Manufacturer Ignition Requirements, NGK's Multi-Ground Plugs Maintain All the Features of Their Standard Plugs. Fits Yamaha 61X/62T/64X Models with OEM Cylinder Heads.
Learn More -
WSM Voltage Regulator - Yamaha
WSM Aftermarket Voltage Regulator for All Yamaha Superjet, FX1, and WaveBlaster 1 Models. Manufactured to OEM specifications
Part Number: 004-225
Learn More -
ADA Cylinder Head Dome - Yamaha 760/1200
ADA Racing billet dome for the Yamaha 760 and 1200 engines, includes compression(OR043) and dome top(OR020) orings. Squish relief is .015 inch @ 86mm with a 10.5 degree angle.
Learn More -
Small Fuel Tank - For PF/RRP Pipe
Reduced size 8.5 Liter (2.25 Gal) fuel tank. Less weight- required when using TNT, RRP or PowerFactor Pipes. Specially designed fuel tank incorporates lower baffle section to reduce fuel sloshing guaranteeing uninterrupted fuel supply. Comes equipped with Dual Fuel Pickups, Fuel Pickup Filters and Fuel Tank Fittings for Gas Tank Vent and Return Lines.
Learn More -
Mikuni Low Speed Washer
Genuine Mikuni Replacement Low Speed Aluminum Washer for Mikuni SBN Carburetors. Diagram #27.
Part Number: BN38/172
Learn More -
Bilge Fitting 45-Degree
Blowsion 45-Degree machined aluminum bilge fittings are a clean replacement of the bulky plastic fittings usually supplied with aftermarket bilge pump kits. Available in Anodized Black or Clear.
Learn More -
DAKINE Footstrap Hardware Kit
Now available! Dakine hardware install kit for installing footstraps. Ultra sanitary and leak proof.
Part Number: 04-02-338
Learn More -
Blowsion Pro Throttle Lever Only
Blowsion Pro Throttle Lever Only. Compatible with Blowson Pro Throttle Lever Assemblies. Also available in Longer Two Finger Version here.
Learn More -
FX-1 Billet Hood Bracket Clip
Blowsion FX1 Billet Hood Bracket Clip. Required when installing Blowsion Billet Handlepole Bracket on the Yamaha FX1. NOTE: Does not work with dual hole pole brackets.
Part Number: 03-03-021
Learn More -
OEM Yamaha Throttle Cable - 95SJ / FX1 / Blaster
Genuine OEM Yamaha Throttle Cable for 95-Older Superjet, FX1 and WaveBlaster. This is the longest OEM Yamaha throttle cable made and is often used for use with aftermarket hulls such as Rickter. 6mm Threaded Ends.
OEM Part Number: EU0-U7252-01-00
Learn More -
RRP Ninja Chin Pad - Competition
The RRP Ninja Full Carbon Competition Chin Pad Design utilizes a 3-bolt mounting system to avoid any steering system issues. This chin pad requires an RRP Steering Stop based on the rear mounting location. Thinner more streamlined design shape! Fits all RRP Cast, RRP Billet, RRP Lightweight Billet and RRP CBX Pole Models. Available in all color options listed.
Learn More