Products
-
Mat Kit - Klowners - Yamaha Superjet (1996-2020)
Blowsion Custom Cut Mat Kit. Glue it On! Fits all 1996-2020 Yamaha Superjet Models with Klowner Footwells. Includes bottom, tray sides, dash, footwell mat pieces, and undermat foam. Klowner Footwells not included. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-077
Learn More -
ODI TLD Grips Orange (130mm)
ODI has enlisted the help of our good friends over at Troy Lee Designs to help put an artistic spin on a quality design. After hundreds of drawings and designs, what has been developed is one of the most innovative ODI grips yet...The ODI TLD Lock-On Grip.
Part Number: 03-05-328
Learn More -
Hood Finger Pull - Yamaha Superjet (1990-2020)
Blowsion Billet Hood Finger Pull. Direct replacement for OEM Yamaha Superjet plastic hood finger pulls. Fits all 1990-2020 OEM Yamaha Superjet Hoods. Replaces factory plastic clip. Stellar function and look! Bright dip anodized Black.
Part Number: 04-03-353
Learn More -
Throttle Adapter - Yamaha (6mm)
6mm Throttle Cable Adapter. A Throttle Cable Adapter is required to run most aftermarket throttle levers. Fits All Years Yamaha Two Stroke and 2021+ Yamaha Superjet PWC Models. Please see list below for model compatibility.
Part Number: 03-05-242
Learn More -
Tow Loop - Bow Eye Mount Cable
Newly Designed. Easily allows tow watercraft to clip and go. Surf riders and racers are insane to ride without one of these. The ONLY way to effectively guarantee avoiding the next big wave set or the next racer on the course.
Part Number: 04-03-069
Learn More -
Blowsion Turbulator Chin Pad
New Blowsion Turbulator Chin Pad. Specifically designed and form fit for the Blowsion Billet Handlepole. Custom Color options available!
Learn More -
Mikuni High Speed Washer
Genuine Mikuni Replacement High Speed Aluminum Washer for Mikuni SBN Carburetors. Diagram #21.
Part Number: BN38/39
Learn More -
Bilge Pump - Rule - 500GPH Automatic
Rule 25SA Fully Submersible Bilge Pump, 500 Gallon Per Hour, 12 Volt DC, Automatic Electronic Sensing. Bilge Pump turns on and checks for water approximately every 2-1/2 minutes. If resistance (water) is found, it will run for as long as water is present. When all the water is pumped out, the pump shuts off and returns to its 2-1/2 minute test cycle.
Part Number: 06-01-002
Learn More -
DASA Cylinder Base Gasket
DASA Replacement Cylinder Base Gasket. Available for 85mm and 89-94mm Billet Cylinder Kits.
Learn More -
OEM Yamaha Steering Nozzle - Superjet (2008-2020)
Genuine OEM Yamaha Steering Nozzle. Fits 1990-2007 Yamaha Superjet,1994-1995 FX1 and 1993-1995 WaveBlaster Models.
Part Number: 6BA-51313-00-00
Learn More -
ODI TLD Grips Aqua (130mm)
ODI has enlisted the help of our good friends over at Troy Lee Designs to help put an artistic spin on a quality design. After hundreds of drawings and designs, what has been developed is one of the most innovative ODI grips yet...The ODI TLD Lock-On Grip.
Part Number: 03-05-329
Learn More -
WSM Short Shaft - Yamaha Superjet
WSM Aftermarket 160mm Short Shaft. Fits 1995 and Newer Yamaha SuperJet Models. Replacement for OEM Yamaha PN# 6R7-51323-02-00
Part Number: 003-250
Learn More -
Footwells - Klowners
The Blowsion Klowner Footwells were designed especially for the rider who need MAX room in the tray. These hand-laid, molded fiberglass insets provide extended room in the tray of your ski to position your feet. Comfortably sized for large to very large feet.
Part Number: 05-03-007
Learn More -
ODI Elite Flow Grips V2.1 Mint (130mm)
ODI’s first generation Lock-On System are standard for mountain bike racers everywhere. ODI has redefined grip performance again. The new Elite Series grips are engineered from end to end to deliver every feature racers demand. Color: Mint
Part Number: 03-05-422
Learn More