Products
-
Trailer Bow Stop - Rubber
Non-marring, shock-absorbent polyurethane bowstop fits Super Jet, Waverunner III, and similar PWCs. Bow Pin with Lanyard & Clip not included.
Part Number: 06-06-141
Learn More -
Throttle Adapter - Yamaha (6mm)
6mm Throttle Cable Adapter. A Throttle Cable Adapter is required to run most aftermarket throttle levers. Fits All Years Yamaha Two Stroke and 2021+ Yamaha Superjet PWC Models. Please see list below for model compatibility.
Part Number: 03-05-242
Learn More -
Blowsion Colored Hose - 3/8 inch
Finish the look of your engine compartment with Blowsion specialty colored 3/8" water cooling hose. Available in Clear, Blue, Green, Orange, Red, Yellow, or Black. Quantity is sold by the foot in continuous lengths.
Learn More -
DASA Intake Manifold O-Ring Kit
DASA Intake Manifold O-Ring Rebuild Kit. Includes replacement O-Rings for V Force 2 Reeds and Carburetor Speed Plate.
Part Number: 01-02-248
Learn More -
Bilge Switch - Start Stop Switch Mount - Yamaha
Blowsion Bilge Switch Stop / Start Switch Mount - Yamaha. This sano billet switch assembly mounts directly to the bottom of the OEM Start / Stop switch housing of all Yamaha watercraft.
Part Number: 06-01-214
Learn More -
Epoxy Resin (2 Parts Pint each) - Quart Kit
Epoxy (2 Part) - Pint Kits. High performance, gap filling, waterproof, 2 part epoxy designed to provide superior results in footwell installations, hull reinforcement and repair. Easy 1 to 1 mixing ratio keeps it simple for even the beginner.
Part Number: 06-03-122
Learn More -
Steering Cable Extension - OEM
Blowsion Stainless Steel Steering Cable Extension. Compatible with all OEM Yamaha and OEM Kawasaki 5mm Steering Cable Ends.
Part Number: 03-04-210
Learn More -
Blowsion Corporate Sticker 8"
Blowsion Corporate Sticker 8 inch. 12 color combos to choose from. These are not cheezy vinyl. Full screen-printed die cuts with UV protective clear. Show your vanity! Sold Each.
Learn More -
Billet Choke Knob - Yamaha
Blowsion Billet Choke Knob. Direct replacement for YAMAHA OEM Plastic choke knob. Installs with OEM set screw (Not Included). Fits all Years Yamaha Superjet, FX1 and WaveBlaster Models. Bright Dip Anodized Black.
Part Number: 04-03-351
Learn More -
Engine Flush Kit - Single Outlet
All metal and stainless construction. Easy to use. Just push in to your 45 degree or 90 degree aftermarket aluminum water bypass(es). Backflush away!
Part Number: 06-04-001
Learn More -
Y Fitting 3/8" Barbed - Black
3/8" Barbed Wye Hose Fitting. Useful for different types of water routing applications.
Part Number: 01-01-068
Learn More -
OEM Yamaha 62T Crankcase (for DASA Stock Stroke Cylinder Kits)
Brand new modified OEM Yamaha 62T Crankcases now available from Blowsion for DASA Big Bore Stock Stroke Engine Setups. Includes Case Bore, Epoxy Fill, Trenching and Reinforcement plate for Stock Stroke Crankshafts.
Part Number: 01-03-763
Learn More
OEM Yamaha Crankcase Part Number: 62T-15100-00-00 -
Blowsion Handlebar Clamps
Blowsion Billet aluminum handle bar clamps for 7/8" Inch bars. Sold as a pair (2) with stainless bar clamp screws included. These bar clamps provide the finishing touch to a clean steering system. Now available in all anodized colors!
Learn More -
Blowsion Hood Seal
Heavy Duty Replacement Hood Seal. Fits all years Yamaha Super Jet, Yamaha FX-1, all years Polaris Octane, Yamaha Wave Blaster and most aftermarket hulls. Dimensions: L 2.7m x W 16mm x H 19mm.
Part Number: 04-04-411
Learn More -
Blowsion Pump Shoe - Yamaha 148MM
The Blowsion 148mm Aluminum Pump Shoe was designed for fitting larger 148mm pumps into both Yamaha Superjet and aftermarket hulls. Using our 148mm shoe vs a 144mm (stock Superjet size) will greatly increase hook up and drive when used in conjunction with 148mm pumps. Fits all years Yamaha Superjet, 1993-1996 WaveBlaster 1, Polaris Octane and Rickters. Mounting holes are not drilled or tapped so installation in the different Yamaha design aftermarket hulls can be facilitated.
Part Number: 02-02-434
Learn More