Products
-
Hood Baffle Air Intake - Tube and Flange Kit
Direct water and air to where you want it in the engine compartment! Drop Tube and Urethane Flange for Hood Baffle Air Intakes. Use with either aftermarket hoods or stock factory hood to increase air flow. Each kit includes three oversize lengths of hose tubing and urethane flanges. Bond-able to hand laid fiberglass, carbon, SMC or ABS inner liners these are simple to install and are an excellent answer for air-starved motors. An EXCELLENT choice for the Kawasaki SXR 800 with the Factory Pipe installed!
Part Number: 05-02-199
Learn More -
Kawasaki Electrical Box Fitting
Billet Aluminum Kawasaki Electrical Box Fittings. Replaces the weak OEM Kawasaki Plastic Electrical Box Fitting (Part Number: 59071-3001) that threads into the stock electrical box. Can be used with OEM Plastic Cap or Billet Aluminum Electrical Box Cap. Threads are 18-1.5mm on the end that goes into the electrical box and 16-1.5mm on the cap side. Includes O-Ring Seal. Fits all Kawasaki JS300, JS440, JS550, 300SX, 550SX, 750SX, 750SXI, 750SXI-Pro and SXR 800 Jet Ski Models. Available in Black, Blue, Green, Red and Orange Anodized Colors.
Learn More -
Blowsion M2SA T-Shirt Red
Blowsion M2SA Logo Short Sleeve T-Shirt. Unisex Sizing. Available in all sizes. Color: Red.
Learn More -
Blowsion Pole Bracket - Kawasaki 2H
Blowsion Billet Handlepole Bracket for All Kawasaki SXR Models. Includes all hardware and Dual Breather air Tubes. Color: Anodized Black.
Part Number: 03-03-025
Learn More -
Super Base Gasket - Kawasaki 750/800
The simple to install stainless and reuseable base gasket, simply clean both mating surfaces and install. Trick. Fits All Years Kawasaki 750 and Kawasaki SXR 800 Models. Thickness: 0.020"
Part Number: 01-03-302
Learn More -
Billet Carburetor Block Off
Sanitary anodized and engraved Blowsion logo carburetor block off. A necessity when using a remote fuel pump. Fits all Mikuni carbs. Billet aluminum with all stainless hardware included.
Part Number: 01-02-557
Learn More -
Undermatting Foam - 5mm Standard
39" x 19" section of White 5mm thick Standard foam undermat. Add extra cushion with this standard 5mm underpad. Easily Sand-able for custom shaping of footwell areas.
Part Number: 04-02-326
Learn More -
Mat Kit - Kickers - Kawasaki 650SX
Blowsion Custom Cut Mat Kit. Glue it On! Fits all years Kawasaki 650SX Standups. Includes bottom, tray sides, dash, footwell mat pieces, and undermat foam. Kicker Footwells not included. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-135
Learn More -
Blowsion Head Girdle Kit
Blowsion Cylinder Head Girdle Kit for Yamaha 760 or 701 Engines. All Stainless steel bolts, washers, and girdle hardware included. Compatible with Blowsion 2-Piece and pre-2015 Blowsion 1-Piece Yamaha Cylinder Heads.
Part Number: 01-03-114
Learn More -
Special Order - Payment Info
Use this link to place a special order item, or submit your billing credit card information on secure order with us thru our SSL secure web cart. Enter address and billing details and we will contact you via email shortly with updated PDF Quote and Freight options if applicable. Nothing will be processed or billed until a confirmation reply is recieved from you. Thank you!
Learn More -
Blowsion Rickter Edge Tan/Purple 1100cc
Brand new Rickter Edge Built for the IJSBA World Finals event in Lake Havasu, this ski got all the attention on vendor row! With custom Blowsion graphics, paired with a one of a kind Jettrim STAR mat kit, this ski is sure to turn heads wherever it goes. Not only does it look great, but it has plenty of power with the 1100cc Dasa Powervalve engine. Of course, no ski would be a Blowsion ski without our signature Blowsion Billet Handlepole. This ski is currently in our Blowsion Showroom and ready to ship immediately.
Part Number: 10-01-071
Learn More -
Expanding Foam (2 Part) - Pint Kit
No more home insulation foam in a can. This is the real deal. Marine quality expanding foam. Mix equal parts A and B in the supplied mixing cups and you have waterproof and cured foam expanding in 60 seconds or less.
Part Number: 06-03-131
Learn More -
Mat Kit - Stitched - Split Lifter - Ergo - Yamaha Superjet (2021+)
Glue On! Includes naugahyde black bottom mat with bumps, carbon black split lifter sides, carbon black dash, ergo front hump, ergo kickers, 5mm undermat foam and trim color option of your choice. Fits all 2021 and Newer Yamaha Superjet 1050 TR1 4-stroke models. See Swatch Below For Trim Color Options. Also high recommended is the specially formulated Blowsion Mat Glue.
Learn More -
Mikuni Adjusting T Screws - Kawasaki
Mikuni high and low-speed carburetor adjuster screws with "T" cross bar - extended length for easy adjustments. Absolutely a must when running aftermarket pipes.
Part Number: 01-02-540
Learn More -
Blowsion FP Headpipe Bolt Kit - Yamaha
Blowsion Stainless Steel FP Headpipe Bolt Kit. Replace those crusty old factory pipe bolts with these stainless steel socket heads. Kit Includes 3 Bolts, 3 washers and 3 Lock Washers. Fits all Yamaha Style FP Headpipes.
Part Number: 01-01-698
Learn More