Products
-
Mat Kit - Kickers - Kawasaki 750
Blowsion Custom Cut Mat Kit. Glue it On! Fits all Kawasaki 750SX, SXi and SXi-Pro Models with Kicker Footwells. Includes bottom, tray sides, dash, footwell mat pieces, and undermat foam. Kicker Footwells not included. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-004
Learn More -
Bilge Switch - Handlebar Mount - Universal
Universal Handle Bar Mount Bilge Switch. Fits any watercraft handle bars on the market. Anodized Black.
Part Number: 06-01-212
Learn More -
Trailer Bow Stop - Rubber
Non-marring, shock-absorbent polyurethane bowstop fits Super Jet, Waverunner III, and similar PWCs. Bow Pin with Lanyard & Clip not included.
Part Number: 06-06-141
Learn More -
Mikuni Adjusting T Screws - Kawasaki
Mikuni high and low-speed carburetor adjuster screws with "T" cross bar - extended length for easy adjustments. Absolutely a must when running aftermarket pipes.
Part Number: 01-02-540
Learn More -
Blowsion Steering System 1-1/8"
Blowsion Steering System for 1-1/8" Fat Bars. We have developed the most advanced and universal steering system available for the stand-up watercraft market. With exclusive feedback from our Pro Blowsion Air Force Racers and Freeriders come check it out. Now available in all anodized colors!
Learn More -
Water Bypass Fitting Pro
Blowsion Pro Water Bypass Fittings increase engine performance by diverting some of the water from the cylinder head to the bypass fitting, rather than forcing all of the water through the exhaust system. Fits 3/8" ID Cooling Hoses.
Learn More -
Epoxy Welder (2 Part)
Epoxy (2 Part) Welder. This is THE glue for all your PWC needs. Bonds to SMC, Gel Coat, fiberglass, aluminum etc. Creme color- can be tinted. This Methacrylic epoxy is your toolbox's best friend!
Part Number: 06-03-121
Learn More -
Primer Kit - Keihin Single
Fits 8mm choke shaft Keihin single carburetors. Starting the engine of your personal watercraft is never a problem with a Blowsion primer kit. All brass fittings and bulletproof plunger. Get rid of that worthless factory choke and apply a direct shot of fuel!
Part Number: 01-02-403
Learn More -
Side Molding 5/8" - Black
Made out of injection molded flexible urethane. Attaches to your watercraft with its own adhesive backing. Each kit includes special pre-wipe cleaner to promote maximum adhesion and durability. The 5/8" size is perfect for all years Kawasaki JS 440/550, Kawasaki 750SXi and Yamaha FX1.
Part Number: 04-02-304
Learn More -
Blowsion Carbon Chin Pad - Yamaha 96+ / Kawi Conversions
Lightweight, contour fit construction with unbreakable carbon construction. The absolute Cadillac of chin pads available. Fits Yamaha Superjet 1996+, FX1 and Kawasaki Conversions (UMI, RRP Yamaha Style Handlepoles)
Part Number: 04-01-201
Learn More -
Destroyer Hardware Kit
Replacement Hardware Install Kit for Blowsion Tubbie Destroyer Sponsons.
Part Number: 02-01-021
Learn More -
Blowsion Tornado Filter 2.25
Blowsion Tornado Filter (2.25 inches tall). Retaining a clear velocity cone on the inside to enhance and direct airflow into the carburetor for increased overall performance, these hardcore mofo's also features an anodized aluminum outer ring with 6 color options. Extensive testing with phenomenal results in both racing, freeride and freestyle applications -- what more can you ask for? Sold Each.
Learn More -
CAS Billet Aluminum Flange Only
Available for riders wanting to use the end flange only for custom scupper and rear exhaust installations etc. The new billet flange assembly is the premium design setup and allows use of the Blowsion billet exhaust outlet so vain riders can sanitize both sides of the rear of their watercraft. Fits all years Super Jet, KAWI 750 and SXR 800, KAWI 650, and Polaris Octane. Anodized Clear.
Part Number: 06-01-023
Learn More -
Factory Pipe B-Pipe Coupler - Heavy Duty
Blowsion manufactured Factory Pipe replacement coupler. This double compound thickness heavy duty silicone exhaust coupler fits "A" and "B" Headpipes including Kawasaki, Yamaha and Polaris Wet pipes. (DIMENSION 4"X 2 1/8") This is NOT the thin blue coupler model offered by other suppliers, but a spec manufactured Blowsion coupler made out of hi-heat silicone hose.
Part Number: 01-01-703
Learn More -
Hi-Torque Starter Motor - Kawasaki
We have worked diligently to manufacture a hi-torque alternative to the super high quality, but exorbitantly priced OEM Kawasaki and Yamaha starters. These beauties feature polished commutators with hi tensile bearings and bushings, sintered copper and carbon/graphite brushes, and stainless hardware.
Part Number: 01-04-156
Learn More -
Pulse Line Fitting 1/4"
Brass Press In Straight Pulse Line Nipple Fitting 1/4" Hose Barb. Use for dual carburetor setups with dual fuel pumps where a second pulse line is required.
Part Number: 01-02-530
Learn More