Products
-
ODI Elite Motion Grips V2.1 Orange (130mm)
ODI’s first generation Lock-On System are standard for mountain bike racers everywhere. ODI has redefined grip performance again. The new Elite Series grips are engineered from end to end to deliver every feature racers demand. Color: Orange
Part Number: 03-05-431
Learn More -
OEM Yamaha Pump Shoe Seal 144MM
OEM Yamaha Pump Shoe Seal. Fits all OEM Yamaha, Skat-Trak and Solas 144mm Pumps.
Part Number: 6R7-51117-01-00
Learn More -
Pro-X Piston Circlip - Yamaha 20MM
Replacement Pro-X Piston Circlip for Yamaha 20mm Wrist Pin. Compatible with Pro-X or OEM pistons. Pro-X Piston clips are not just a circled wire. They avoid the pin to move in the piston bosses. Do not underestimate the forces on the pin during operation. Exceeds OEM specifications. Sold as a pair (Set of 2).
Part Number: 01-03-604
Learn More -
MSD Salt Water Spark Plug Boot Kit
This is THE ANSWER for riders dealing with erratic spark caused by corrosion and exposure to saltwater. Kit includes instructions, two MSD 90-degree boots, MSD plug cap retainers, two crimp-on terminals, vulcanizing tape, and dielectric compound.
Part Number: 01-04-411
Learn More -
Steering Cable Extension - OEM
Blowsion Stainless Steel Steering Cable Extension. Compatible with all OEM Yamaha and OEM Kawasaki 5mm Steering Cable Ends.
Part Number: 03-04-210
Learn More -
RRP Front Fuel Tank - Superjet / Rickter
The RRP Front Fuel Tank has been designed for Rickter and Yamaha Superjet applications using Yamaha 650/701/760 OEM exhausts and Factory B Pipes.
Part Number: 01-02-567
Learn More -
RRP Handle Bar Pad
RRP AST Protective Handlebar Pad. Compatible with RRP and Blowsion 1 1/8" Fat Bar steering systems. Available in Black Only.
Part Number: 03-04-063
Learn More -
Bilge Pump Hose - 3FT
Blowsion Bilge Pump Hose - 3 Foot Section is plenty for most single pump applications. Color: Black Only. Hose Diameter (ID): 3/4" inch.
Part Number: 06-01-301
Learn More -
OEM Yamaha 62T Crankcase (for DASA Stock Stroke Cylinder Kits)
Brand new modified OEM Yamaha 62T Crankcases now available from Blowsion for DASA Big Bore Stock Stroke Engine Setups. Includes Case Bore, Epoxy Fill, Trenching and Reinforcement plate for Stock Stroke Crankshafts.
Part Number: 01-03-763
Learn More
OEM Yamaha Crankcase Part Number: 62T-15100-00-00 -
OEM Yamaha Pump Rebuild Kit
Genuine 4-Piece OEM Yamaha Pump Rebuild Kit. Fits OEM 144mm and SOLAS Stainless Pumps.
Part Number: 02-02-486
Learn More -
Handle Pole Limiting Rope
The design of the Blowsion pole limiting rope is to STOP your pole from extending approx 2-3" from total max extension. This prevents the forward motion of the pole and riders body from destroying expensive handlepoles, pole brackets, hulls and also expensive human body parts!
Part Number: 03-04-151
Learn More -
Mikuni Check Valve Plate Screw
Genuine Mikuni Replacement Check Valve Plate Screw for Mikuni SBN Carburetors. Diagram #37.
Part Number: BV15/121-05-GG
Learn More -
Maxima K2 Premix Oil - 64oz
Maxima Premix Oil Formula K2 is a very high performance 100% synthetic 2-cycle lubricant utilizing 2000 centistoke esters along with special additives to achieve outstanding levels of protection and cleanliness. 64oz / 1.89 Liters.
Part Number: 06-03-022
Learn More -
DASA Stock Stroke Piston Kit - 89mm-95mm
DASA Stock Stroke 89.00mm-95.00mm Piston kits now available by Blowsion.
Learn More -
Solas Impeller - Yamaha 144MM YQ-CD
Solas Concord YQ-CD 75mm large hub Impeller for Yamaha 144mm Pumps. Fits 1990-2020 Yamaha Superjet and 1993-1996 Yamaha WaveBlaster Models. Large polished blade area and superior hub design deliver increased acceleration and top speed. Includes Nose Cone and solas Impeller tool.
Learn More -
Blowsion Pump Shoe - Yamaha 148MM
The Blowsion 148mm Aluminum Pump Shoe was designed for fitting larger 148mm pumps into both Yamaha Superjet and aftermarket hulls. Using our 148mm shoe vs a 144mm (stock Superjet size) will greatly increase hook up and drive when used in conjunction with 148mm pumps. Fits all years Yamaha Superjet, 1993-1996 WaveBlaster 1, Polaris Octane and Rickters. Mounting holes are not drilled or tapped so installation in the different Yamaha design aftermarket hulls can be facilitated.
Part Number: 02-02-434
Learn More