Products
-
Blowsion Colored Hose - 1/4 inch
Finish the look of your engine compartment with Blowsion specialty colored 1/4" fuel hose. Available in Clear, Blue, Green, Orange, Red, Yellow, or Black. Quantity is sold by the foot in continuous lengths.
Learn More -
Antigravity ATX12-HD RE-START Lithium Battery
The Antigravity ATX12-HD-RS is a hi-power lightweight Lithium battery, built with groundbreaking RE-START Technology (built-in jump-starting) so you won’t ever get stranded with a dead battery again! This is the HEAVY DUTY version of the standard duty ATX12-RS, and offers more capacity/cranking power for those who need it.
Part Number: AG-ATX12-HD-RS
Learn More -
Blowsion Mat Glue - Pint
Blowsion Mat Kit Glue "Blow Goo" to the rescue. Use this solvent-based contact adhesive with your Hydro Turf or stitched mat kit and never worry again about your mats coming loose. Not water-based!
Part Number: 06-03-141
Learn More -
Mikuni Throttle Shaft Rebuild 44MM
Genuine Mikuni replacement throttle valve rebuild kit for Mikuni Super BN 44mm Carburetors. MK-BN/044-TV.
Part Number: 01-02-537
Learn More -
Cold Fusion Flywheel Cover Replacement O-Ring
Replacement O-Ring Gasket Seal for the Cold Fusion Yamaha Billet Flywheel Cover.
Part Number: 01-03-358
Learn More -
ODI TLD Grips Red (130mm)
ODI has enlisted the help of our good friends over at Troy Lee Designs to help put an artistic spin on a quality design. After hundreds of drawings and designs, what has been developed is one of the most innovative ODI grips yet...The ODI TLD Lock-On Grip.
Part Number: 03-05-326
Learn More -
RRP Adjustable Hood Latch Assembly
The New Rickter-RRP Hood Latch has been produced for use on all, Rickter standup hulls, Rickter MX1, Yamaha Superjets and any aftermarket hulls using Yamaha based latch systems. This new complete latch features the Rickter-RRP adjustable hood latch allowing you to easily adjust the pressure applied on the hood seal preventing water intrusion. The adjustable hood latch comes complete with all the hardware needed for installation. Available in 2 anodized colors.
Learn More -
Blowsion Billet Flywheel Cover (Last Model)
Closeout Sale on Last Years Model. Blowsion Billet Flywheel Cover. Fits all OEM Yamaha Superjet 61X and 62T Crankcases. Stainless Steel Hardware and O-Ring Gasket Seal Included. Limited Quantities/Colors available.
Learn More -
Blowsion Cylinder Sleeve - Yamaha 850
Yamaha SuperJet 850 Big Bore Sleeves. Fits 89mm to 91mm Piston. Performance Pre-Ported. To be used with stock stroke through 6 mil stroker motors. Blowsion custom designed include a wider exhaust port, wider boost port, deeper transfers and a narrowed skirt.
Part Number: 01-03-452
Learn More -
ODI Reflex Grips V2.1 Orange (135mm)
We are excited to announce the newest addition to the ODI line up of v2.1 Lock-On Grips – the Reflex grip. Drawing on over 40 years of experience of producing performance-driven grips and feedback from our extensive network of top riders across the globe, the Reflex grips have been engineered to reduce impacts and vibration being passed on to the riders’ hands to allow you to ride more with less pain and fatigue. Color: Orange
Part Number: 03-05-448
Learn More -
Maxima K2 Premix Oil - 16oz
Maxima Premix Oil Formula K2 is a very high performance 100% synthetic 2-cycle lubricant utilizing 2000 centistoke esters along with special additives to achieve outstanding levels of protection and cleanliness. 16oz / 473ml.
Part Number: 06-03-024
Learn More -
Blowsion Steering System Rebuild Kit
Blowsion Steering System Rebuild kit includes roller bearing, thrust washers, thrust bearing, and large and small O-rings.
Part Number: 03-05-020
Learn More -
OEM Yamaha Motor Mount - FX1/WaveBlaster
Genuine OEM Yamaha Motor Mount for FX-1 and WaveBlaster 1. OEM Yamaha Part Number: 62E-44517-A1-8P Learn More -
Yamaha Intake Manifold Gasket 701 (61X) - Lower
Yamaha Lower Intake Manifold Gasket for OEM Yamaha 701 (61x) Manifolds. Replaces OEM Yamaha Gasket Part Number: 61X-13566-A1-00
Part Number: 01-02-444
Learn More -
Hydro-Turf Sheet - Dual Layer - Diamond
Dual Color Sheets of 1/4" (5.5mm) Hydro-Turf with Cut Diamond Grooves. Available in any two of the color combinations Hydro Turf offers on the below drop down menus.
See our special formulated solvent-based Mat Glue for Installation.
Learn More -
Factory Zero ATV Hitch Bracket (for J130 Totes)
Factory Zero ATV Trailer Hitch Bracket Kit for the Factory Zero Beach Tote. Fits J130S Beach Totes.
Part Number: 06-05-093
Learn More