Products
-
Undermatting Foam - 9mm Plush
48" x 17.5" section of 9mm thick plush (softer) foam undermat. This our softest underpad. PLUSH offers greater comfort and compression recovery for extreme riders.
Part Number: 04-02-328
Learn More -
Blowsion Billet Head Insert
Blowsion Billet Cylinder Head Insert for the newly redesigned Blowsion 1-Piece Cylinder Head. Available in all anodized colors!
Learn More -
Blowsion Pump Shoe - Yamaha 144MM
Blowsion Aluminum Pump Shoe for Yamaha 144mm Pumps. Replace that easily broken OEM plastic intake duct with this unbreakable aluminum replacement. Fits all years Yamaha Superjet, 1993-1996 WaveBlaster 1, Polaris Octane and Rickters. Mounting holes are not drilled or tapped so install in the different Yamaha design aftermarket hulls can be facilitated.
Part Number: 02-02-432
Learn More -
Blowsion Billet Flywheel Cover
Blowsion Billet Flywheel Cover. Fits all OEM Yamaha Superjet 61X and 62T Crankcases. Stainless Steel Hardware and O-Ring Gasket Seal Included. Available in all colors!
Learn More -
Water Bypass Fitting 90-Degree
Blowsion Billet 90-Degree Water Bypass fittings. Fits 3/8" ID Cooling Hoses. Offered in Anodized Clear, Black, Green, Red, Blue and Orange. All Colors In stock!
Learn More -
Seat Cover - Yamaha WaveBlaster - Mod
Yamaha WaveBlaster MOD Seat Cover. Custom hand stitched in any combination of colors and patterns you desire.
Part Number: 04-05-002
Learn More -
Blowsion Kustom Cut-Back Stainless Impellers
Increased acceleration, bottom end hook-up and hi-rev grunt are only a few of the advantages of the revolutionary Blowsion Large Magnum Hub cut-back impellers now being offered.
Learn More -
Primer Kit - Mikuni Dual
Fits 6mm choke shaft Mikuni dual carburetors. Starting the engine of your personal watercraft is never a problem with a Blowsion primer kit. All brass fittings and bulletproof plunger.
Part Number: 01-02-402
Learn More -
Blowsion Strap Hook Base
Blowsion Billet Strap Hook Base. With the ever evolving aftermarket hulls and different engine configurations available in today's market the Blowsion Mechanic team consistently ran into problems with having to relocate individual components E.G Exhaust, Battery and Mounting Straps etc... So they went to work and designed a Billet Aluminum Strap Hook Base. Available in all colors! Strap Hook Sold Separately.
Learn More -
Rotary Bilge Switch - 3 Position
Blowsion Rotary waterproof bilge switches are corrosion resistant and have withstood the most abuse we can give them. Pair with the Blowsion Dash Fitting for best protection.
Part Number: 06-01-201
Learn More -
DASA Powervalve Engine 16mm (1050cc to 1200cc)
DASA Billet Powervalve Engines - 16mm Stroker Crankshaft - Available in 89mm or 94mm bore.
Learn More -
ODI Xtreme Grips Grey (130mm)
Xtreme Grips from ODI. New Graphite Grey Grip design. Starter kits come with Carbon Silver ODI Lock On Clamps and ODI’s new Snap Cap end caps. These grips feature a tapered knurl pattern that is larger and deeper where you need more traction.
Part Number: 03-05-301
Learn More -
Blowsion 1-Piece Cylinder Head - Yamaha
New low cost one piece billet cylinder head. Anodized for corrosion protection with Blowsion Engraved logos. For 701 / 760 / 850 Yamaha Engines. NOTE: Cylinder Head Domes, Optional Hardware Kit, Optional Girdle Kit and Optional Color Anodized Head Insert are all sold separately.
Learn More -
Marine Sealant Tube - Black (240ML)
The key to installing Tubbie Sponsons, Railcaps and other composite accessories on your watercraft. Easy-to-use tube fits a standard caulking gun. Fast-set formula dries tack-free in 90 minutes and delivers extremely tough bonds. Color: Black.
Part Number: 06-03-136
Learn More -
Rickter MX1 Hull
After 2 years of R&D with the best sit down freeriders, The Rickter Team is very proud to introduce the all new Rickter MX1 Hull. The Rickter MX-1 Hull is fully inspired by the famous Yamaha WaveBlaster with added stability and amazing handling. Available in Fiberglass, Carbon Look, Carbon TeXtreme Look, Full Carbon Fiber and Full Carbon TeXtreme.
PLEASE EMAIL FOR AVAILABILITY
Learn More -
Kawasaki Electrical Box Backing Nut
Billet Aluminum Backing Nut for Kawasaki Billet Electrical Box Fitting. These are to be used on aftermarket or custom electrical boxes that are not threaded and require a nut to secure the fitting. Anodized Clear for corrosion protection.
Part Number: 01-04-454
Learn More