Products

Yamaha Upper Intake Manifold Gasket for OEM Yamaha 701 (61x) Manifolds. Replaces OEM Yamaha Gasket Part Number: 61X-13563-A1-00

Part Number: 01-02-443

The ODI Ruffian MX 130mm Lock-On Grips offer the narrow diamondized pattern that made our Ruffian grips a classic, with an added half-waffle pattern for additional traction. Color: Black.

Part Number: 03-05-315

Blowsion Mat Kit Glue "Blow Goo" to the rescue. Use this solvent-based contact adhesive with your Hydro Turf or stitched mat kit and never worry again about your mats coming loose. Not water-based!

Part Number: 06-03-141

Rule 25SA Fully Submersible Bilge Pump, 500 Gallon Per Hour, 12 Volt DC, Automatic Electronic Sensing. Bilge Pump turns on and checks for water approximately every 2-1/2 minutes. If resistance (water) is found, it will run for as long as water is present. When all the water is pumped out, the pump shuts off and returns to its 2-1/2 minute test cycle.

Part Number: 06-01-002

We are excited to announce the newest addition to the ODI line up of v2.1 Lock-On Grips – the Reflex grip. Drawing on over 40 years of experience of producing performance-driven grips and feedback from our extensive network of top riders across the globe, the Reflex grips have been engineered to reduce impacts and vibration being passed on to the riders’ hands to allow you to ride more with less pain and fatigue. Color: Grey

Part Number: 03-05-447

ODI has enlisted the help of our good friends over at Troy Lee Designs to help put an artistic spin on a quality design. After hundreds of drawings and designs, what has been developed is one of the most innovative ODI grips yet...The ODI TLD Lock-On Grip.

Part Number: 03-05-326

Billet Aluminum Backing Nut for Kawasaki Billet Electrical Box Fitting. These are to be used on aftermarket or custom electrical boxes that are not threaded and require a nut to secure the fitting. Anodized Clear for corrosion protection.

Part Number: 01-04-454

Yamaha SuperJet 850 Big Bore Sleeves. Fits 89mm to 91mm Piston. Performance Pre-Ported. To be used with stock stroke through 6 mil stroker motors. Blowsion custom designed include a wider exhaust port, wider boost port, deeper transfers and a narrowed skirt.

Part Number: 01-03-452

Super-M is a high performance racing 2-Cycle lubricant incorporating the latest technology. Super-M is a blend of clean burning petroleum base oil, synthetic polyolester, polybutene, anti-scuff/anti-wear compounds and a new additive that keeps rings, power valves and the exhaust tract "carbon free". 64oz / 1.89 Liters.

Part Number: 06-03-012

Blowsion Billet Aluminum Handlepole Center Extrusion. Fits the Blowsion Billet Handlepole. Available in 26 inch or 29 inch Lengths.

Heavy Duty Steel Bow Stop Pin with red coated handle. Comes with lanyard and clip.

Part Number: 06-06-152

Mikuni High Performance Super BN 46mm Carburetor. Comes Complete with Extended Throttle Shaft and Choke shaft removed. Sold Each. BN46-42-8002

Part Number: 01-02-105

1/8 NPT x 3/8 Barb 90-Degree Brass Elbow Fitting. Used on Most 2-Stroke PWC.

Part Number: 01-01-076

The ODI Cross Trainer 130mm Lock-On Grip Set features soft comfortable rib patterns interlaced with a thicker criss-cross pattern for a soft feel without a loss in control. Made in the USA!

Part Number: 03-05-370

3M Marine Grade Silicone creates a rubbery waterproof seal that remains flexible and is mildew resistant. For sealing Lexan™, Plexiglass™, gelcoat, fiberglass, wood, glass, metal, rubber, and vinyl. Cured sealant remains flexible.

Part Number: 08029