Products
-
Blowsion Mat Glue - Pint
Blowsion Mat Kit Glue "Blow Goo" to the rescue. Use this solvent-based contact adhesive with your Hydro Turf or stitched mat kit and never worry again about your mats coming loose. Not water-based!
Part Number: 06-03-141
Learn More -
Mikuni Throttle Shaft Rebuild 44MM
Genuine Mikuni replacement throttle valve rebuild kit for Mikuni Super BN 44mm Carburetors. MK-BN/044-TV.
Part Number: 01-02-537
Learn More -
ODI Reflex Grips V2.1 Orange (135mm)
We are excited to announce the newest addition to the ODI line up of v2.1 Lock-On Grips – the Reflex grip. Drawing on over 40 years of experience of producing performance-driven grips and feedback from our extensive network of top riders across the globe, the Reflex grips have been engineered to reduce impacts and vibration being passed on to the riders’ hands to allow you to ride more with less pain and fatigue. Color: Orange
Part Number: 03-05-448
Learn More -
ODI TLD Grips Red (130mm)
ODI has enlisted the help of our good friends over at Troy Lee Designs to help put an artistic spin on a quality design. After hundreds of drawings and designs, what has been developed is one of the most innovative ODI grips yet...The ODI TLD Lock-On Grip.
Part Number: 03-05-326
Learn More -
RRP Adjustable Hood Latch Assembly
The New Rickter-RRP Hood Latch has been produced for use on all, Rickter standup hulls, Rickter MX1, Yamaha Superjets and any aftermarket hulls using Yamaha based latch systems. This new complete latch features the Rickter-RRP adjustable hood latch allowing you to easily adjust the pressure applied on the hood seal preventing water intrusion. The adjustable hood latch comes complete with all the hardware needed for installation. Available in 2 anodized colors.
Learn More -
Billet Fuel Select - Yamaha
Sanitize the dash of your Yamaha controls with this Blowsion Billet Dash Knob. Replaces the OEM Yamaha plastic ON/OFF/RESERVE Knob. Uses OEM screw to mount. Fits all years Yamaha Superjet, FX1 and WaveBlaster Models. Also Compatible with most Yamaha 2-Stroke Sitdown Models (Wave Jammer, Wave Runner, Wave Raider, VXR). Bright Dip Anodized Black. 1 Per Package.
Part Number: 04-03-352
Learn More -
Maxima Super M Premix Oil - 64oz
Super-M is a high performance racing 2-Cycle lubricant incorporating the latest technology. Super-M is a blend of clean burning petroleum base oil, synthetic polyolester, polybutene, anti-scuff/anti-wear compounds and a new additive that keeps rings, power valves and the exhaust tract "carbon free". 64oz / 1.89 Liters.
Part Number: 06-03-012
Learn More -
Factory Zero ATV Hitch Bracket (for J130 Totes)
Factory Zero ATV Trailer Hitch Bracket Kit for the Factory Zero Beach Tote. Fits J130S Beach Totes.
Part Number: 06-05-093
Learn More -
Bow Pin with Lanyard & Clip
Heavy Duty Steel Bow Stop Pin with red coated handle. Comes with lanyard and clip.
Part Number: 06-06-152
Learn More -
Inline Fuel Filter 1/4"
Inline Fuel Filter 1/4". Clear Plastic for High Volume, Low pressure Fuel Systems. Inline fuel filters filter out those harmful particles that can cause engine damage.
Part Number: 01-02-550
Learn More -
OEM Yamaha 62T Crankcase (for DASA +12mm Stroker Cylinder Kits)
OEM Yamaha 62T Crankcase Machined for DASA +12mm Stroker Cylinder Kits.
Part Number: 01-03-766
Learn More -
Hydro-Turf Sheet - Dual Layer - Diamond
Dual Color Sheets of 1/4" (5.5mm) Hydro-Turf with Cut Diamond Grooves. Available in any two of the color combinations Hydro Turf offers on the below drop down menus.
See our special formulated solvent-based Mat Glue for Installation.
Learn More -
OEM Yamaha Lanyard
OEM Yamaha Lanyard. Fits all Yamaha PWC.
Part Number: EW2-68348-00-00 Learn More
-
Mikuni SBN Low-Speed Pilot Jet
Genuine Mikuni SBN Low-Speed Pilot Jets in Stock! Available in all sizes. Sold Each.
Learn More -
Jet Renu - Renu Shield 12oz
Our “Shield Renu” is a protective coating made up of a special blend of silicones with fast-drying surfactants which makes the treatment of surfaces fast & easy. This product has a superfine mist that coats all surfaces evenly without sticky build-up or residue. Renu Shield Protects & conditions, vinyl, plastics, leather, rubber, metal, engine components and even wood surfaces. Spray on, wipe off, perfect for hard to reach areas while making plastic look new again with a high gloss shine. Size: 12oz. can.
Part Number: JR-045
Learn More -
ODI Reflex Grips V2.1 Blue (135mm)
We are excited to announce the newest addition to the ODI line up of v2.1 Lock-On Grips – the Reflex grip. Drawing on over 40 years of experience of producing performance-driven grips and feedback from our extensive network of top riders across the globe, the Reflex grips have been engineered to reduce impacts and vibration being passed on to the riders’ hands to allow you to ride more with less pain and fatigue. Color: Blue
Part Number: 03-05-453
Learn More