Products
-
Blowsion Mat Glue - Quart
Blowsion Mat Kit Glue "Blow Goo" to the rescue. Use this solvent-based contact adhesive with your Hydro Turf or stitched mat kit and never worry again about your mats coming loose. Not water-based!
Part Number: 06-03-142
Learn More -
RRP Rickter Pump Shoe 155MM
The RRP Rickter 155mm Aluminum Pump Shoe fits all Yamaha Superjet, 1993-1996 WaveBlaster 1, Rickter and most aftermarket Yamaha based hulls.
Part Number: 02-02-431
Learn More -
1/8 NPT x 3/8 Barb 90-Degree
1/8 NPT x 3/8 Barb 90-Degree Brass Elbow Fitting. Used on Most 2-Stroke PWC.
Part Number: 01-01-076
Learn More -
ODI TLD Grips Red (130mm)
ODI has enlisted the help of our good friends over at Troy Lee Designs to help put an artistic spin on a quality design. After hundreds of drawings and designs, what has been developed is one of the most innovative ODI grips yet...The ODI TLD Lock-On Grip.
Part Number: 03-05-326
Learn More -
RRP Standard Footwells Only
Replacement RRP Standard Footwell Bindings Only. Includes Left and Right Side Foot hold. No Hardware or Mounting Brackets are Included.
Part Number: 05-03-024
Learn More -
Handlepole Breather Tubing
Handle Pole Breather Tubing. Fits Blowsion, RRP, and other pole brackets. Available in 2.0" Inch or 2.25" Inch ID. Length: 24" (61cm) Sold Individually.
Learn More -
3M 5200 Marine Adhesive Sealant Fast Cure White (10oz)
If you are looking for a bedding compound with exceptionally strong adhesion, and are not concerned about later removal of hardware, 3M Fast Cure 5200 should be at the top of your list. Along with outstanding adhesion, 3M Fast Cure 5200 remains flexible after it cures and it can be used above or below the waterline. Ideal for underwater thru-hull fittings, hull-to-deck joints, portholes and bonding wood to fiberglass.
Part Number: 06520
Learn More -
Water Bypass Fitting 45-Degree
These Blowsion machined bypass fittings are angled at 45 degrees of flow. Fits 3/8" ID Hose. Offered in Anodized Clear, Black, Red, Blue, Orange and Green.
Learn More -
Pulse Line Fitting 1/4"
Brass Press In Straight Pulse Line Nipple Fitting 1/4" Hose Barb. Use for dual carburetor setups with dual fuel pumps where a second pulse line is required.
Part Number: 01-02-530
Learn More -
ODI Elite Motion Grips V2.1 Black (130mm)
ODI’s first generation Lock-On System are standard for mountain bike racers everywhere. ODI has redefined grip performance again. The new Elite Series grips are engineered from end to end to deliver every feature racers demand. Color: Black
Part Number: 03-05-428
Learn More -
T Fitting 3/8" Barbed - Black
T Hose Fitting 3/8" x 3/8" x 3/8" Barbed. Useful for different types of water routing applications. Color: Black
Part Number: 01-01-069
Learn More -
RRP Rickter Hood Seal MX1
Replacement RRP Rickter Hood Seal. Fits all Rickter MX1 Hull Models.
Part Number: 04-04-410
Learn More -
Tubbie I and II Sponsons - Universal Fit -Screw On
Don't sell that SXI Pro, Yamaha Superjet or Octane to buy an SXR or Hydrospace to be competitive in racing or against your buddies on the waves or lake. The Tubbies are the equalizer.
Learn More -
Exhaust Manifold Gasket - Yamaha 760 (62T)
Yamaha 760 62T Exhaust manifold Gasket.. Replaces OEM Yamaha Part Number 62T-14613-01-00
Part Number: 01-01-735
Learn More -
Factory Pipe B-Pipe Coupler - Heavy Duty
Blowsion manufactured Factory Pipe replacement coupler. This double compound thickness heavy duty silicone exhaust coupler fits "A" and "B" Headpipes including Kawasaki, Yamaha and Polaris Wet pipes. (DIMENSION 4"X 2 1/8") This is NOT the thin blue coupler model offered by other suppliers, but a spec manufactured Blowsion coupler made out of hi-heat silicone hose.
Part Number: 01-01-703
Learn More -
Battery Box Strap - Heavy Duty
Blowsion Heavy Duty Freeride Battery Strap. Much Stronger and slightly shorter than OEM Yamaha straps which takes away the slack when using aftermarket batteries. 10 inches total length (hook to hook).
Part Number: 01-04-604
Learn More