Products
-
OEM Yamaha Battery / Waterbox Strap
Genuine OEM Yamaha Battery / Waterbox Strap. Fits all Years Yamaha Superjet and FX1 models.
Part Number: EU0-68218-04-00
Learn More -
Corner Kicks (2 inch)
Use Hydro-Turf 2 inch Rear Corner Kicks for added Feel and Control. Installs under foam or stitched mats (some models of watercraft may require an extended bottom mat).
Part Number: 04-02-348
Learn More -
Water Bypass Fitting 45-Degree
These Blowsion machined bypass fittings are angled at 45 degrees of flow. Fits 3/8" ID Hose. Offered in Anodized Clear, Black, Red, Blue, Orange and Green.
Learn More -
Bilge Switch - Handlebar Mount - Universal
Universal Handle Bar Mount Bilge Switch. Fits any watercraft handle bars on the market. Anodized Black.
Part Number: 06-01-212
Learn More -
Maxima K2 Premix Oil - 5 Gallon
Maxima Premix Oil Formula K2 is a very high performance 100% synthetic 2-cycle lubricant utilizing 2000 centistoke esters along with special additives to achieve outstanding levels of protection and cleanliness. 5 Gallons.
Part Number: 06-03-021
Learn More -
1/4" Quick Disconnect with Shut-Off Valve
Motion Pro Fuel Shut-Off Valve 1/4" Separating Quick Connect (MP#12-0029).
Learn More -
Blowsion Krok Kollar
Blowsion Stainless Steel machined Steering Lock nut. Includes stainless binding screw. Prevents standard lock nut torque failure. Not something made in the land of won-tons or available at your local hardware store!
Part Number: 03-05-019
Learn More -
Blowsion Steering System Rebuild Kit
Blowsion Steering System Rebuild kit includes roller bearing, thrust washers, thrust bearing, and large and small O-rings.
Part Number: 03-05-020
Learn More -
OEM Yamaha Motor Mount - FX1/WaveBlaster
Genuine OEM Yamaha Motor Mount for FX-1 and WaveBlaster 1. OEM Yamaha Part Number: 62E-44517-A1-8P Learn More -
ODI Reflex Grips V2.1 Orange (135mm)
We are excited to announce the newest addition to the ODI line up of v2.1 Lock-On Grips – the Reflex grip. Drawing on over 40 years of experience of producing performance-driven grips and feedback from our extensive network of top riders across the globe, the Reflex grips have been engineered to reduce impacts and vibration being passed on to the riders’ hands to allow you to ride more with less pain and fatigue. Color: Orange
Part Number: 03-05-448
Learn More -
Yamaha Intake Manifold Gasket 701 (61X) - Lower
Yamaha Lower Intake Manifold Gasket for OEM Yamaha 701 (61x) Manifolds. Replaces OEM Yamaha Gasket Part Number: 61X-13566-A1-00
Part Number: 01-02-444
Learn More -
Blowsion Mat Glue - Pint
Blowsion Mat Kit Glue "Blow Goo" to the rescue. Use this solvent-based contact adhesive with your Hydro Turf or stitched mat kit and never worry again about your mats coming loose. Not water-based!
Part Number: 06-03-141
Learn More -
Mikuni Throttle Shaft Rebuild 44MM
Genuine Mikuni replacement throttle valve rebuild kit for Mikuni Super BN 44mm Carburetors. MK-BN/044-TV.
Part Number: 01-02-537
Learn More -
ODI TLD Grips Red (130mm)
ODI has enlisted the help of our good friends over at Troy Lee Designs to help put an artistic spin on a quality design. After hundreds of drawings and designs, what has been developed is one of the most innovative ODI grips yet...The ODI TLD Lock-On Grip.
Part Number: 03-05-326
Learn More -
RRP Adjustable Hood Latch Assembly
The New Rickter-RRP Hood Latch has been produced for use on all, Rickter standup hulls, Rickter MX1, Yamaha Superjets and any aftermarket hulls using Yamaha based latch systems. This new complete latch features the Rickter-RRP adjustable hood latch allowing you to easily adjust the pressure applied on the hood seal preventing water intrusion. The adjustable hood latch comes complete with all the hardware needed for installation. Available in 2 anodized colors.
Learn More