Products

Blowsion Stainless Steel Steering Cable Extension. Compatible with all OEM Yamaha and OEM Kawasaki 5mm Steering Cable Ends.

Part Number: 03-04-210

Pole Spacer required for all riders running an extremely tight pole bolt configuration. Prevents cracking or bending of the pole mount end of the handlepole. Fits RRP Billet Handlepole Models Only.

Part Number: 03-04-066

The RRP Rickter Front Foothold is wrapped with two layers of 9mm premium plush underpad with Rickter’s durable yet soft molded diamond Hydro-Turf EVA. Also includes install hardware of 4 x M8 Countersunk bolts, Washers, Locknuts, and RRP AB Washers for a clean and strong installation. The EVA is wider on the sides of the binding to accommodate a range of tray sizes. Light trimming of the EVA Is recommended for the ideal fit followed by drilling four holes in the dash to install the binding at the desired height.

Part Number: 05-03-019

OEM Yamaha Bedplate - Left Side.

Part Number: 6R7-21415-01-00

OEM Yamaha Dowel Pin Large. Fits Yamaha Flywheel Cover.

Part Number: 93606-12019-00

1/8 NPT x 3/8 Barb 90-Degree Brass Elbow Fitting. Used on Most 2-Stroke PWC.

Part Number: 01-01-076

Blowsion logo Outerwears flame arrestor water-resistant screens. Specifically formulated to prevent water ingress. Available for tapered tornado filters. Sold Each.

Replacement RRP Standard Footwell Bindings Only. Includes Left and Right Side Foot hold. No Hardware or Mounting Brackets are Included.

Part Number: 05-03-024

ODI has enlisted the help of our good friends over at Troy Lee Designs to help put an artistic spin on a quality design. After hundreds of drawings and designs, what has been developed is one of the most innovative ODI grips yet...The ODI TLD Lock-On Grip.

Part Number: 03-05-329

If you are looking for a bedding compound with exceptionally strong adhesion, and are not concerned about later removal of hardware, 3M Fast Cure 5200 should be at the top of your list. Along with outstanding adhesion, 3M Fast Cure 5200 remains flexible after it cures and it can be used above or below the waterline. Ideal for underwater thru-hull fittings, hull-to-deck joints, portholes and bonding wood to fiberglass.

Part Number: 06520

Epoxy (2 Part) - Quart Kits. High performance, gap filling, waterproof, 2 part epoxy designed to provide superior results in footwell installations and hull reinforcement and repair. Easy 1 to 1 mixing ratio keeps it simple for even the beginner.

Part Number: 06-03-123

RRP TeXtreme Carbon Fiber Exhaust System with Waterbox. Compatible with all Yamaha 701 based engines. Not compatible with full size OEM Yamaha fuel tank.

Part Number: 01-04-272

Rickter Edge Carbon Ride Plate. Fits ALL Rickter Edge FS / FR Hull Models. Three Length Options Available.

We are excited to announce the newest addition to the ODI line up of v2.1 Lock-On Grips – the Reflex grip. Drawing on over 40 years of experience of producing performance-driven grips and feedback from our extensive network of top riders across the globe, the Reflex grips have been engineered to reduce impacts and vibration being passed on to the riders’ hands to allow you to ride more with less pain and fatigue. Color: Pink

Part Number: 03-05-449

Blowsion Mat Kit Glue "Blow Goo" to the rescue. Use this solvent-based contact adhesive with your Hydro Turf or stitched mat kit and never worry again about your mats coming loose. Not water-based!

Part Number: 06-03-142