Products
-
Billet Drive Couplers - Yamaha
Yamaha Billet Driveline Couplers. Updated design for 2018! These are now lighter and have built-in hex for easy installation with an adjustable wrench. Fits all Yamaha Superjet and WaveBlaster Models except for 1991 and some 1992 Yamaha 650 SJ's. Machined from 6061-T6 aluminum for superior strength and durability. Made in USA! Color: Anodized Clear
Part Number: 02-02-251
Learn More -
Black Mamba Exhaust Hose
This Heavy Duty Rear Exhaust Hose replaces the expensive and prone to fail OEM Yamaha Superjet Exhaust Hose.
Part Number: 01-01-705
Learn More -
Blowsion Battery Box
Replace that cracked and worn out stock plastic battery box with bulletproof Blowsion aluminum. Each box includes all stock location retaining clips for easy exchange. Padded bottom. Direct fit replacement for all years Yamaha Super Jet, FX1 and Polaris Octane. Can be fit as replacement to all Years Kawasaki 750 and SXR 800 with minor battery strap modifications. Color: Anodized Black
Part Number: 01-04-601
Learn More -
Blowsion Cylinder Sleeve - Yamaha 785
Yamaha 785 SuperJet 84-86.5mm Big Bore Sleeves. Performance Pre-Ported. To be used with stock stroke through 6 mil stroker motors. Blowsion custom designed include a wider exhaust port, wider boost port, deeper transfers and a narrowed skirt. Sold Each.
Part Number: 01-03-451
Learn More -
Blowsion Cylinder Sleeve - Yamaha 850
Yamaha SuperJet 850 Big Bore Sleeves. Fits 89mm to 91mm Piston. Performance Pre-Ported. To be used with stock stroke through 6 mil stroker motors. Blowsion custom designed include a wider exhaust port, wider boost port, deeper transfers and a narrowed skirt.
Part Number: 01-03-452
Learn More -
Billet Carburetor Block Off
Sanitary anodized and engraved Blowsion logo carburetor block off. A necessity when using a remote fuel pump. Fits all Mikuni carbs. Billet aluminum with all stainless hardware included.
Part Number: 01-02-557
Learn More -
Billet Choke Knob - Yamaha
Blowsion Billet Choke Knob. Direct replacement for YAMAHA OEM Plastic choke knob. Installs with OEM set screw (Not Included). Fits all Years Yamaha Superjet, FX1 and WaveBlaster Models. Bright Dip Anodized Black.
Part Number: 04-03-351
Learn More -
Blowsion Dash Knob - Kawasaki
Blowsion Billet Dash Knob. Direct replacement for OEM Kawasaki Plastic Knobs. Bright Dip Anodized. 1 Per Package. Fit all Kawasaki 750 Sxi and SXR 800 Models. Sanitize your dash--the finishing touch when also combined with our billet dashboard plates on the 750 Sxi. (NOTE: Not to be used as Star Trek badge Identification.)
Learn More -
Blowsion Billet Fuel Filler Neck - Kawasaki
Blowsion Billet aluminum fuel cap socket filler neck. Fits all years Kawasaki SXR 800, SXR 1500, 750 SX, SXI and SXI Pro, ZXi, and STX models. Works with stock plastic or aftermarket billet gas caps. Available in Black or Clear.
Learn More -
Blowsion Billet Fuel Filler Neck - Yamaha
Blowsion Billet Fuel Filler Neck For ALL Yamaha PWC. Available in Black or Clear. Learn More -
Billet Fuel Select - Yamaha
Sanitize the dash of your Yamaha controls with this Blowsion Billet Dash Knob. Replaces the OEM Yamaha plastic ON/OFF/RESERVE Knob. Uses OEM screw to mount. Fits all years Yamaha Superjet, FX1 and WaveBlaster Models. Also Compatible with most Yamaha 2-Stroke Sitdown Models (Wave Jammer, Wave Runner, Wave Raider, VXR). Bright Dip Anodized Black. 1 Per Package.
Part Number: 04-03-352
Learn More -
Blowsion Billet Pivot Bolt - Yamaha
Lightweight Billet Handle Pole Bolt. Weighing in at an amazing 90 grams, the Blowsion 7072 Hardened Billet aluminum handlepole bolt is 1/3rd the weight of the OEM pole bolt.
Part Number: 03-04-144
Learn More -
Blowsion Steering Stop
Blowsion stainless Steering Stop and nut. Updated design allows for two mounting positions for riders wanting more steering throw. Fits all OEM, UMI,Factory Yamaha, RRP and AC aluminum Handlepoles.
Part Number: 03-04-131
Learn More -
Blowsion Steering System without Turnplate
Blowsion Billet aluminum steering system without turnplate. Stainless Steel Turnplate shaft rides in two O-ring sealed bearings. Included special machined Blowsion Krok Kollar stainless lock nut with set screw. Fits all stock or aftermarket Yamaha design handle poles. Steering Cap and bearing housing are carbon anodized black for corrosion protection. Works with Blowsion Kawasaki and Yamaha billet shortened turnplate. Includes 7/8" Handlebar Clamps.
Part Number: 03-05-001
Learn More -
Blowsion Shortened Turnplate
Experience the improved ride and benefits of having an adjustable and shortened handlepole length without replacing your handlepole. The Blowsion billet shortened length turn plate can be combined with an OEM or aftermarket handlepole to create the perfect rider setup. Color: Anodized Black.
Part Number: 03-05-043
Learn More -
CAS Billet Aluminum Flange Only
Available for riders wanting to use the end flange only for custom scupper and rear exhaust installations etc. The new billet flange assembly is the premium design setup and allows use of the Blowsion billet exhaust outlet so vain riders can sanitize both sides of the rear of their watercraft. Fits all years Super Jet, KAWI 750 and SXR 800, KAWI 650, and Polaris Octane. Anodized Clear.
Part Number: 06-01-023
Learn More