Products
-
Mikuni High Speed Washer
Genuine Mikuni Replacement High Speed Aluminum Washer for Mikuni SBN Carburetors. Diagram #21.
Part Number: BN38/39
Learn More -
ODI TLD Grips Aqua (130mm)
ODI has enlisted the help of our good friends over at Troy Lee Designs to help put an artistic spin on a quality design. After hundreds of drawings and designs, what has been developed is one of the most innovative ODI grips yet...The ODI TLD Lock-On Grip.
Part Number: 03-05-329
Learn More -
Bilge Pump - Rule - 500GPH Automatic
Rule 25SA Fully Submersible Bilge Pump, 500 Gallon Per Hour, 12 Volt DC, Automatic Electronic Sensing. Bilge Pump turns on and checks for water approximately every 2-1/2 minutes. If resistance (water) is found, it will run for as long as water is present. When all the water is pumped out, the pump shuts off and returns to its 2-1/2 minute test cycle.
Part Number: 06-01-002
Learn More -
Footwells - Klowners
The Blowsion Klowner Footwells were designed especially for the rider who need MAX room in the tray. These hand-laid, molded fiberglass insets provide extended room in the tray of your ski to position your feet. Comfortably sized for large to very large feet.
Part Number: 05-03-007
Learn More -
OEM Yamaha Steering Nozzle - Superjet (2008-2020)
Genuine OEM Yamaha Steering Nozzle. Fits 1990-2007 Yamaha Superjet,1994-1995 FX1 and 1993-1995 WaveBlaster Models.
Part Number: 6BA-51313-00-00
Learn More -
Blowsion Steering System 7/8"
Blowsion Billet Steering System for 7/8" Standard Handlebars. Works with OEM and Aftermarket 7/8" Handlebars. Steering System Includes Shortened Turnplate and 7/8" Handlebar Clamps. Now Available in all colors!
Learn More -
WSM Short Shaft - Yamaha Superjet
WSM Aftermarket 160mm Short Shaft. Fits 1995 and Newer Yamaha SuperJet Models. Replacement for OEM Yamaha PN# 6R7-51323-02-00
Part Number: 003-250
Learn More -
Mikuni SBN High-Speed Main Jet
Genuine Mikuni SBN High Speed Main Jets in Stock! Available in all sizes. Sold Each.
Learn More -
ODI Elite Flow Grips V2.1 Mint (130mm)
ODI’s first generation Lock-On System are standard for mountain bike racers everywhere. ODI has redefined grip performance again. The new Elite Series grips are engineered from end to end to deliver every feature racers demand. Color: Mint
Part Number: 03-05-422
Learn More -
OEM Yamaha 62T Crankcase (for DASA Stroker Cylinder Kits)
Brand new modified OEM Yamaha 62T Crankcases now available from Blowsion for DASA Big Bore Stroker Engine Setups. Includes Case Bore, Epoxy Fill, Trenching and Stroker Case Reinforcement plate for +5mm, +6mm, 8mm and +10mm stroker crankshafts.
Part Number: 01-03-762
Learn More -
Blowsion SS Jet Ski Cover - Yamaha Superjet (1996-2020)
Blowsion Stealth Series PWC Jet Ski Covers. No more cover flapping on the freeway. Weather resistant material with special UV coating. Engineered for a custom fit for each PWC model. Fits all 1996-2020 Yamaha Superjet Models. Color: Stealth Black.
Part Number: 06-06-042
Learn More -
PowerFactor Exhaust Kit
Not for the faint of heart (or wallet!), The PowerFactor Dry Exhaust system has been used by the top freestyle riders for the last 7 years, and has won 6 world championships. Learn More -
Bilge Fitting 45-Degree
Blowsion 45-Degree machined aluminum bilge fittings are a clean replacement of the bulky plastic fittings usually supplied with aftermarket bilge pump kits. Available in Anodized Black or Clear.
Learn More -
DASA Intake Manifold O-Ring Kit
DASA Intake Manifold O-Ring Rebuild Kit. Includes replacement O-Rings for V Force 2 Reeds and Carburetor Speed Plate.
Part Number: 01-02-248
Learn More -
Tow Loop - Bow Eye Mount Cable
Newly Designed. Easily allows tow watercraft to clip and go. Surf riders and racers are insane to ride without one of these. The ONLY way to effectively guarantee avoiding the next big wave set or the next racer on the course.
Part Number: 04-03-069
Learn More -
Engine Block Off Plates Yamaha (62T)
Engine Block Off Plates 62T. A great way to block off access to your internal motor and all its complex innards. No more red rags or cheesy paper towels to suck through your initial engine fire off and carpet the cases with! Cool way for storing and displaying motors. Carbon Black Anodized and includes all mounting hardware. Fits all years 62T 701cc Yamaha two cylinder motors.
Part Number: 01-03-813
Learn More