Products

ODI’s first generation Lock-On System are standard for mountain bike racers everywhere. ODI has redefined grip performance again. The new Elite Series grips are engineered from end to end to deliver every feature racers demand. Color: Grey

Part Number: 03-05-429

Black Xtreme Grips from ODI. Starter kits come with Carbon Silver ODI Lock On Clamps and ODI’s new Snap Cap end caps. These grips feature a tapered knurl pattern that is larger and deeper where you need more traction.

Part Number: 03-05-302

Rule 25SA Fully Submersible Bilge Pump, 500 Gallon Per Hour, 12 Volt DC, Automatic Electronic Sensing. Bilge Pump turns on and checks for water approximately every 2-1/2 minutes. If resistance (water) is found, it will run for as long as water is present. When all the water is pumped out, the pump shuts off and returns to its 2-1/2 minute test cycle.

Part Number: 06-01-002

Blowsion Corporate Sticker 17 inch. 12 color combos to choose from. These are not cheezy vinyl. Full screen-printed die cuts with UV protective clear. Show your vanity! Sold Each.

ODI’s first generation Lock-On System are standard for mountain bike racers everywhere. ODI has redefined grip performance again. The new Elite Series grips are engineered from end to end to deliver every feature racers demand. Color: Black

Part Number: 03-05-421

Available for a limited time only exclusively thru Blowsion! ODI Ruffian 130mm Length No-Flange Lock-On Grip System Starter Pack - Limited Edition (Green).

Part Number: 03-05-311

“Dri Wash” is one of Jet Renu's must have products. Dri Wash quickly and effectively removes dirt and grime from any surface by lifting away the contaminates with its powerful foaming action. Dri Wash not only works great to clean most surfaces without the use of water but it also leaves behind a protective coating and brilliant shine. Environmentally friendly and simple to use, just Spray on Wipe off, cleans, polishes & protects against UV Rays as well as it smells great. When used with a clean microfiber towel Dri Wash will not scratch the surface. Size: 12oz. can

Part Number: JR-1111

If you are looking for a bedding compound with exceptionally strong adhesion, and are not concerned about later removal of hardware, 3M Fast Cure 5200 should be at the top of your list. Along with outstanding adhesion, 3M Fast Cure 5200 remains flexible after it cures and it can be used above or below the waterline. Ideal for underwater thru-hull fittings, hull-to-deck joints, portholes and bonding wood to fiberglass.

Part Number: 06520

ODI has enlisted the help of our good friends over at Troy Lee Designs to help put an artistic spin on a quality design. After hundreds of drawings and designs, what has been developed is one of the most innovative ODI grips yet...The ODI TLD Lock-On Grip.

Part Number: 03-05-323

We have taken one of the oldest aftermarket products in our industry and refined every element imaginable. Introducing the 2024 Blowsion Pro Throttle Lever. Our new billet adjustable Pro Lever sets the standard for quality, rider comfort and cutting edge design while being proudly manufactured and assembled completely in the USA from 6061 Aluminum. Available for all models. Available in anodized Clear, Black, Orange, Red, Blue, Green, Purple and Teal. Also available as a one finger lever option here.

ODI has enlisted the help of our good friends over at Troy Lee Designs to help put an artistic spin on a quality design. After hundreds of drawings and designs, what has been developed is one of the most innovative ODI grips yet...The ODI TLD Lock-On Grip.

Part Number: 03-05-329

The ODI Cross Trainer 130mm Lock-On Grip Set features soft comfortable rib patterns interlaced with a thicker criss-cross pattern for a soft feel without a loss in control. Made in the USA!

Part Number: 03-05-370

Two California Originals have teamed up to bring you an updated version of one of your favorite grips. The new ODI Vans v2.1 Lock-On Grips feature a new single-clamp design for simplified installation and an updated waffle pattern for better comfort and control. The grips are constructed from ODI’s proprietary materials and are available in six awesome colors with custom checkered clamps in coordinating colors. This modern take on the Vans grip adds updated features to the classic design while still providing the rider with the distinctive feel that they have come to love. Color: Light Blue

Part Number: 03-05-440 Learn More

Blowsion Bilge Pump Hose - 3 Foot Section is plenty for most single pump applications. Color: Black Only. Hose Diameter (ID): 3/4" inch.

Part Number: 06-01-301

Designed not just for cutting edge performance but killer style! Same best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalize your watercraft to your own unique riding style! Specifically designed for the unique handling characteristics of the 2017 and Newer Yamaha EX Hull. Includes backing rails and all necessary hardware.

Part Number: WR559-I