Products
-
Hydro-Turf Kick Wedge 1"
Add a kick tail to your watercraft bottom mat area with this 1" wedge. Helps to keep the riders back foot from slipping out of the tray and getting weight farther forward.
Part Number: 04-02-345
Learn More -
Blowsion Fuel Tank Fitting
Blowsion Fuel Tank Fitting with Rubber Grommet. 1/4 Hose Barb. Compression Fit. Install with 17/32 Drill Bit.
Part Number: 01-02-598
Learn More -
Blowsion Pro Throttle Lever Only
Blowsion Pro Throttle Lever Only. Compatible with Blowson Pro Throttle Lever Assemblies. Also available in Longer Two Finger Version here.
Learn More -
ODI Aluminum Lock Ring Set
Anodized billet aluminum lock rings from ODI. Custom Blowsion anodized colors to make all your friends jealous. Fits all ODI Lock-On grip system grips. Each package contains 4 lock rings and stainless allen fasteners.
Learn More -
WSM Voltage Regulator - Yamaha
WSM Aftermarket Voltage Regulator for All Yamaha Superjet, FX1, and WaveBlaster 1 Models. Manufactured to OEM specifications
Part Number: 004-225
Learn More -
RRP Ninja Chin Pad - Competition
The RRP Ninja Full Carbon Competition Chin Pad Design utilizes a 3-bolt mounting system to avoid any steering system issues. This chin pad requires an RRP Steering Stop based on the rear mounting location. Thinner more streamlined design shape! Fits all RRP Cast, RRP Billet, RRP Lightweight Billet and RRP CBX Pole Models. Available in all color options listed.
Learn More -
Tie Down Pin
Tie Down Pin is designed for all PWC with front or rear bow eyes. A simple way to tie down your PWC, tow a water toy (or skier), another boat, even to help winching in the PWC or attach a docking line!
Part Number: 06-06-103
Learn More -
Bilge Pump - Rule - 500GPH
Rule Non-Automatic 500GPH Fully Submersible 12 Volt DC bilge pump. Unmatched in pumping power and longevity. Higher Flow – optimized impeller to provide greater flow at the same amperage. Back Flow Prevention - reduces the amount of water left over in the bilge, reducing odor and helping keep your bilge cleaner. Easy to mount and ready to go!
Part Number: 06-01-001
Learn More -
Blowsion Hood Seal
Heavy Duty Replacement Hood Seal. Fits all years Yamaha Super Jet, Yamaha FX-1, all years Polaris Octane, Yamaha Wave Blaster and most aftermarket hulls. Dimensions: L 2.7m x W 16mm x H 19mm.
Part Number: 04-04-411
Learn More -
Mat Kit - Diggers - Yamaha FX1
Blowsion Custom Cut Mat Kit. Glue it On! Fits all 1994-1995 Yamaha FX-1 Models with Digger Footwells. Includes bottom, tray sides, dash, footwell mat pieces, and undermat foam. Digger Footwells not included. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-053
Learn More -
Handle Pole Limiting Rope
The design of the Blowsion pole limiting rope is to STOP your pole from extending approx 2-3" from total max extension. This prevents the forward motion of the pole and riders body from destroying expensive handlepoles, pole brackets, hulls and also expensive human body parts!
Part Number: 03-04-151
Learn More -
Blowsion Carbon Chin Pad - Yamaha 96+ / Kawi Conversions
Lightweight, contour fit construction with unbreakable carbon construction. The absolute Cadillac of chin pads available. Fits Yamaha Superjet 1996+, FX1 and Kawasaki Conversions (UMI, RRP Yamaha Style Handlepoles)
Part Number: 04-01-201
Learn More -
ADA Cylinder Head Girdle Kit - Yamaha
ADA Racing Cylinder Head Girdle Kit for Yamaha 701/760 and Yamaha 1100/1200 Girdled Cylinder heads. Includes 6 stainless studs, 6 stainless washers, and 6 chrome acorn nuts. The only true girdle system. It does not bolt the cylinder to the cases, but sandwiches the cylinder between the head and the cases. Therefore, there is no pressure on the base of the cylinder. The threads are rolled for strength and not cut. Thread rolling compresses the material adding strength to the threads. Cutting threads leaves the root of the thread sharp, weakening the thread and making them easier to break.
Part Number: YA701G6
Learn More -
Epoxy Welder (2 Part)
Epoxy (2 Part) Welder. This is THE glue for all your PWC needs. Bonds to SMC, Gel Coat, fiberglass, aluminum etc. Creme color- can be tinted. This Methacrylic epoxy is your toolbox's best friend!
Part Number: 06-03-121
Learn More -
RRP Steering Stop / Support
Rick Roy Products billet aluminum Steering Stop / Chin pad Support. This product is required for all RRP Handlepoles when fitting an RRP Chin Pad (Kawasaki, Yamaha, Rickter, Kommander, etc.). Designed to provide additional support to chin pads and prevent them from crushing or flexing. May fit other brands of handlepoles as well. Anodized, includes stainless hardware.
Learn More -
Mikuni Valve Body Gasket
Genuine Mikuni Replacement Valve Body Gasket for Mikuni SBN Carburetors. Diagram #11.
Part Number: BN34/123
Learn More