Products
-
3M Marine Grade Silicone Sealant Clear (10oz)
3M Marine Grade Silicone creates a rubbery waterproof seal that remains flexible and is mildew resistant. For sealing Lexan™, Plexiglass™, gelcoat, fiberglass, wood, glass, metal, rubber, and vinyl. Cured sealant remains flexible.
Part Number: 08029
Learn More -
OEM Yamaha Starter Relay
Genuine OEM Yamaha Starter Relay. Fits 2002-2020 Yamaha Superjet. See complete list of models below.
Part Number: 68N-81940-00-00 Learn More
-
RRP X-Lite Adjustable Battery Box
RRP X-Lite Billet Fully Adjustable Battery Box to fit most PWC Batteries. Includes EVA Foam Pad (you cut to fit your application). Available in Anodized Black.
Learn More -
ODI Rogue Grips Black (130mm)
The ROGUE 130mm (no flange) black handlebar grips from ODI feature a solid design with a soft rubber shell for maximum traction and comfort. Billet Locking collars on both sides of the grips keep them securely in place.
Part Number: 03-05-307
Learn More -
ODI Reflex Grips V2.1 Purple (135mm)
We are excited to announce the newest addition to the ODI line up of v2.1 Lock-On Grips – the Reflex grip. Drawing on over 40 years of experience of producing performance-driven grips and feedback from our extensive network of top riders across the globe, the Reflex grips have been engineered to reduce impacts and vibration being passed on to the riders’ hands to allow you to ride more with less pain and fatigue. Color: Purple
Part Number: 03-05-450
Learn More -
ODI Cross Trainer Grips Black (130mm)
The ODI Cross Trainer 130mm Lock-On Grip Set features soft comfortable rib patterns interlaced with a thicker criss-cross pattern for a soft feel without a loss in control. Made in the USA!
Part Number: 03-05-370
Learn More -
RRP Threaded Safety Rod
Replacement RRP Threaded Safety Rod for RRP Handlepoles. For use with tubes up to 26 Inches. Nuts not included.
Part Number: 03-04-036
Learn More -
RRP Pole Spacer for Cast Poles
Pole Spacer required for all riders running an extremely tight pole bolt configuration. Prevents cracking or bending of the pole mount end of the handlepole. Fits RRP Cast Handlepole Models Only.
Part Number: 03-04-061
Learn More -
Billet Fuel Select - Yamaha
Sanitize the dash of your Yamaha controls with this Blowsion Billet Dash Knob. Replaces the OEM Yamaha plastic ON/OFF/RESERVE Knob. Uses OEM screw to mount. Fits all years Yamaha Superjet, FX1 and WaveBlaster Models. Also Compatible with most Yamaha 2-Stroke Sitdown Models (Wave Jammer, Wave Runner, Wave Raider, VXR). Bright Dip Anodized Black. 1 Per Package.
Part Number: 04-03-352
Learn More -
Primer Bulb Kit - Mikuni Dual
Fits 6mm choke shaft Mikuni dual carburetors. Starting the engine of your personal watercraft is never a problem with a Blowsion primer kit. All brass fittings and Primer Bulb. Get rid of that worthless factory choke and apply a direct shot of fuel! Pair with the Blowsion Dash Fitting for best protection.
Part Number: 01-02-406
Learn More -
OEM Yamaha Electrical Box Housing
OEM Yamaha Electrical Box Housing. Includes back Housing only.
OEM Part Number: 6M6-8552A-01-8P
Learn More -
Blowsion Corporate Sticker 17"
Blowsion Corporate Sticker 17 inch. 12 color combos to choose from. These are not cheezy vinyl. Full screen-printed die cuts with UV protective clear. Show your vanity! Sold Each.
Learn More -
Blowsion Flywheel Cover Replacement O-Ring
Replacement O-Ring Gasket Seal for all versions of the Blowsion Billet Flywheel Cover.
Part Number: 01-03-359
Learn More -
Carbon Fuel Tank Cradle
Blowsion Carbon composite tank holder keeps the tank from sliding around in the bottom of a hull during freestyle maneuvers. Available for Small Fuel Tank and OEM/ColdFusion Yamaha Fuel Tanks.
Learn More -
Hood Finger Pull - Yamaha Superjet (1990-2020)
Blowsion Billet Hood Finger Pull. Direct replacement for OEM Yamaha Superjet plastic hood finger pulls. Fits all 1990-2020 OEM Yamaha Superjet Hoods. Replaces factory plastic clip. Stellar function and look! Bright dip anodized Black.
Part Number: 04-03-353
Learn More -
Fire Extinguisher - PWC Model
Fire Extinguisher PWC model. The compact design of this 5-lb. fire extinguisher makes it ideal for personal watercraft storage compartments or other confined locations. Features rapid pressure check button. Fire extinguisher is approved for marine use and meets USCG Type B-1 size requirements. UL-rated 5-B:C for flammable liquid fires and electrical fires in Marine and RV applications. Includes mounting bracket to secure unit.
Part Number: 06-02-001
Learn More