Products

Rule 25SA Fully Submersible Bilge Pump, 500 Gallon Per Hour, 12 Volt DC, Automatic Electronic Sensing. Bilge Pump turns on and checks for water approximately every 2-1/2 minutes. If resistance (water) is found, it will run for as long as water is present. When all the water is pumped out, the pump shuts off and returns to its 2-1/2 minute test cycle.

Part Number: 06-01-002

OEM Yamaha 62T Crankcase Machined for DASA +12mm Stroker Cylinder Kits.

Part Number: 01-03-766

The premier battery for all racing and freerdie/freestyle applications. Go upside down a lot? You need an ODYSSEY!

Part Number: 01-04-621

The ODI Cross Trainer 130mm Lock-On Grip Set features soft comfortable rib patterns interlaced with a thicker criss-cross pattern for a soft feel without a loss in control. Made in the USA!

Part Number: 03-05-370

If you are looking for a bedding compound with exceptionally strong adhesion, and are not concerned about later removal of hardware, 3M Fast Cure 5200 should be at the top of your list. Along with outstanding adhesion, 3M Fast Cure 5200 remains flexible after it cures and it can be used above or below the waterline. Ideal for underwater thru-hull fittings, hull-to-deck joints, portholes and bonding wood to fiberglass.

Part Number: 06520

Motion Pro Cable Luber V3. Makes it easy for you to efficiently lube control cables without the mess. Unique design features an innovative seal and adjustable plunger to ensure proper lubrication with less lube.

Part Number: 08-0609

Genuine 3 Piece OEM Yamaha Crank Seal Kit. fits all years yamaha 701/760/850/DASA Engines.

Part Number: 02-02-487

ODI’s first generation Lock-On System are standard for mountain bike racers everywhere. ODI has redefined grip performance again. The new Elite Series grips are engineered from end to end to deliver every feature racers demand. Color: Light Blue

Part Number: 03-05-432

Maxima Premix Oil Formula K2 is a very high performance 100% synthetic 2-cycle lubricant utilizing 2000 centistoke esters along with special additives to achieve outstanding levels of protection and cleanliness. 1 Liter / 33.8oz.

Part Number: 06-03-023

Inline Fuel Filter 1/4". Clear Plastic for High Volume, Low pressure Fuel Systems. Inline fuel filters filter out those harmful particles that can cause engine damage.

Part Number: 01-02-550

Blowsion manufactured Factory Pipe replacement coupler. This double compound thickness heavy duty silicone exhaust coupler fits "A" and "B" Headpipes including Kawasaki, Yamaha and Polaris Wet pipes. (DIMENSION 4"X 2 1/8") This is NOT the thin blue coupler model offered by other suppliers, but a spec manufactured Blowsion coupler made out of hi-heat silicone hose.

Part Number: 01-01-703

48" x 17.5" section of 18mm thick plush (softer) foam undermat. This our softest underpad. PLUSH offers greater comfort and compression recovery for extreme riders.

Part Number: 04-02-331

Blowsion Tornado Filter (2.25 inches tall). Retaining a clear velocity cone on the inside to enhance and direct airflow into the carburetor for increased overall performance, these hardcore mofo's also features an anodized aluminum outer ring with 6 color options. Extensive testing with phenomenal results in both racing, freeride and freestyle applications -- what more can you ask for? Sold Each.

Genuine Mikuni Viton Needle & Seat. Available in all Sizes. Sold Each.

Factory Zero Jet Launcher Beach Tote. The best selling Jet Launcher for Stand-Up Ski in Japan. Quick and Easy assembly and disassembly that does not require any tools. No bolts and nuts. Just pull and push Hitch Pins and assembly and disassembly is complete in just minutes. A special angle handle design makes it easy to launch and load a stand up watercraft.

Part Number: 06-05-090