Products
-
Rotary Bilge Switch - 3 Position
Blowsion Rotary waterproof bilge switches are corrosion resistant and have withstood the most abuse we can give them. Pair with the Blowsion Dash Fitting for best protection.
Part Number: 06-01-201
Learn More -
Blowsion Cross Bar Pad
Blowsion Cross Bar Pad. For use with all 7/8" inch Standup and Sport watercraft handlebars including Blowsion Kommand Bars. Pad measures 5.25 inches in length. Available in all colors!
Learn More -
Blowsion Billet Hood Latch
Replace your rear factory hood latch with a billet aluminum BLOWSION latch and ride worry free. Recently updated and re-machined to also fit the Kawasaki SXR 800 and SXR 1500. Also fits all years Yamaha FX1 and all years Yamaha Super Jet. A must for surf and big wave riders, especially those running a BLOWSION pole limiting rope. Requires the stock base locking hardware. Now available in more colors- Anodized Green, Red, Blue, Orange, Clear, Purple and Black!
Learn More -
Primer Kit - Mikuni Dual
Fits 6mm choke shaft Mikuni dual carburetors. Starting the engine of your personal watercraft is never a problem with a Blowsion primer kit. All brass fittings and bulletproof plunger.
Part Number: 01-02-402
Learn More -
Blowsion Pro Throttle Lever
We have taken one of the oldest aftermarket products in our industry and refined every element imaginable. Introducing the 2023 Blowsion Pro Throttle Lever. Our new billet adjustable Pro Lever sets the standard for quality, rider comfort and cutting edge design while being proudly manufactured and assembled completely in the USA from 6061 Aluminum. Available for all models. Available in anodized Clear, Black, Orange, Red, Blue, Green, Purple and Teal. Also available as a two finger lever option here.
Learn More -
DAKINE Footstrap Hardware Kit - w/glue
Now available! Dakine hardware install kit with glue for installing footstraps. Ultra sanitary and leak proof.
Part Number: 04-02-339
Learn More -
Mat Kit - Rickter FS2 / FR2 / EVO / EDGE
Blowsion Custom Cut Mat Kit. Glue it on! Fits Rickter EVO FS1 / FS2 and Older Models. Includes bottom, tray sides, dash and undermat foam. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-050
Learn More -
Undermatting Foam - 5mm Standard
39" x 19" section of White 5mm thick Standard foam undermat. Add extra cushion with this standard 5mm underpad. Easily Sand-able for custom shaping of footwell areas.
Part Number: 04-02-326
Learn More -
RRP Billet Pole Bushings
Replacement Delrin Pivot Bolt Bushings for the RRP Billet Handlepole, RRP Lightweight Billet Handlepole and RRP CBX Carbon Billet Handlepole models. Available for both Yamaha or Kawasaki Applications. Quantity two bushings included per kit.
Learn More -
OEM Yamaha 62T Crankcase (for DASA Stock Stroke Cylinder Kits)
Brand new modified OEM Yamaha 62T Crankcases now available from Blowsion for DASA Big Bore Stock Stroke Engine Setups. Includes Case Bore, Epoxy Fill, Trenching and Reinforcement plate for Stock Stroke Crankshafts.
Part Number: 01-03-763
Learn More
OEM Yamaha Crankcase Part Number: 62T-15100-00-00 -
OEM Starter Bendix - Yamaha / Kawasaki
OEM Kawasaki Starter Bendix. Fits All Kawasaki and Yamaha Models.
Part Number: 13101-3708 Learn More
-
Mikuni Arm Pin Screw
Genuine Mikuni Replacement Mikuni Arm Pin Screw for Mikuni SBN Carburetors. Diagram #41.
Part Number: C6-0308-G
Learn More -
Maxima Multi-Purpose Penetrant Lube (MPPL)
Maxima Multi Purpose Penetrant Lube (MPPL) is a superior, all purpose penetrating lube that displaces water and provides excellent rust and corrosion protection. It is useful wherever a penetrating lubricant is required. Maxima MPPL forms a protective film on metal and will not harm plastic or painted surfaces. Excellent fogging oil or starting fluid for 2-cycle or 4-cycle engines.
Part Number: 06-03-041
Learn More -
Jet Renu - Purple Wash & Wax Soap Gallon
Jet Renu “Purple” Wash and Wax is the ultimate high foaming premium soap which is fortified with 100% Brazilian Carnauba Wax. “Purple” cleans deep down into the gel coat and painted surface, lifts away caked on dirt and grime while leaving behind a high gloss shine and a protective barrier from the sun’s harmful UV rays. Our super concentrated formula is pH balanced, biodegradable and non-toxic. Size: 1 Gallon.
Part Number: JR-1002
Learn More -
Rickter EVO Carbon Ride Plate
Rickter Carbon Fiber Ride Plate. Fits all FS-2, FR-2 and EVO Hull Models. Available in two lengths.
Learn More -
Blowsion Pro Throttle Lever Only
Blowsion Pro Throttle Lever Only. Compatible with Blowson Pro Throttle Lever Assemblies. Also available in Longer Two Finger Version here.
Learn More