Products
-
Blowsion Krok Kollar
Blowsion Stainless Steel machined Steering Lock nut. Includes stainless binding screw. Prevents standard lock nut torque failure. Not something made in the land of won-tons or available at your local hardware store!
Part Number: 03-05-019
Learn More -
RRP Trim Lever
RRP Rickter Trim Lever. Available in Black, Blue, Red or Silver.
Learn More -
Footwells - Kickers
Blowsion Kicker Footwells were Designed specifically for the Super Jet and Kawasaki SX-R 800, and used exclusively by Ross Champion on his Factory Blowsion Yamaha SuperJets and Air Darin Anderson on his SXR's and SJ's.
Part Number: 05-03-005
Learn More -
ODI AG-1 Grips Black/Grey (135mm)
ODI’s first generation Lock-On System are standard for racers everywhere. Designed in a partnership with 2-time UCI World Cup Downhill Champion Aaron Gwin, ODI has redefined grip performance again. The new AG-1 grips are engineered from end to end to deliver every feature racers demand.
Part Number: 03-05-372
Learn More -
ODI Aluminum Lock Ring Set
Anodized billet aluminum lock rings from ODI. Custom Blowsion anodized colors to make all your friends jealous. Fits all ODI Lock-On grip system grips. Each package contains 4 lock rings and stainless allen fasteners.
Learn More -
T Fitting 3/8" x 3/8" x 3/8"
Brass Hose Barb Tee Fitting 3/8" x 3/8" x 3/8" for custom water routing applications.
Part Number: 01-01-080
Learn More -
ODI Elite Motion Grips V2.1 Mint (130mm)
ODI’s first generation Lock-On System are standard for mountain bike racers everywhere. ODI has redefined grip performance again. The new Elite Series grips are engineered from end to end to deliver every feature racers demand. Color: Mint
Part Number: 03-05-430
Learn More -
Blowsion Chip Brush
The Blowsion economy chip brush is perfect for Hydro Turf and Stitched Mat glue installations. Learn More -
Blowsion Colored Hose - 3/8 inch
Finish the look of your engine compartment with Blowsion specialty colored 3/8" water cooling hose. Available in Clear, Blue, Green, Orange, Red, Yellow, or Black. Quantity is sold by the foot in continuous lengths.
Learn More -
Blowsion Steering System Rebuild Kit
Blowsion Steering System Rebuild kit includes roller bearing, thrust washers, thrust bearing, and large and small O-rings.
Part Number: 03-05-020
Learn More -
Blowsion Pump Shoe - Yamaha 148MM
The Blowsion 148mm Aluminum Pump Shoe was designed for fitting larger 148mm pumps into both Yamaha Superjet and aftermarket hulls. Using our 148mm shoe vs a 144mm (stock Superjet size) will greatly increase hook up and drive when used in conjunction with 148mm pumps. Fits all years Yamaha Superjet, 1993-1996 WaveBlaster 1, Polaris Octane and Rickters. Mounting holes are not drilled or tapped so installation in the different Yamaha design aftermarket hulls can be facilitated.
Part Number: 02-02-434
Learn More -
Blowsion Handlebar Clamps
Blowsion Billet aluminum handle bar clamps for 7/8" Inch bars. Sold as a pair (2) with stainless bar clamp screws included. These bar clamps provide the finishing touch to a clean steering system. Now available in all anodized colors!
Learn More -
Side Rail Turf Kit - Yamaha SJ / FX1 / KAW 650/750 / Rickter
Blowsion Custom Cut Side Rail Turf Kit. Fits all years Yamaha Superjet, FX1, Polaris Octane, Rickter and Kawasaki 650 and 750 Stand up Models. Improve the traction and looks on the side rails of your ski with our custom fit side rail covering kits. Side Rail Turf Kits Include enough material to cover the front bumper, sides, and rear corners of the side rail. Side rail kits bond directly to the fiberglass. All OEM/Stock plastic will need to be removed prior to application of side rail turf kit. For most applications a Quart of Mat Glue is recommended for installation. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-324
Learn More -
ODI Ruffian Grips Black (120mm)
The ODI Ruffian 120mm (with 3/4 flange) handlebar grips from ODI feature a solid design with a soft rubber shell for maximum traction and comfort. Anodized Billet Locking collars on both sides of the grips keep them securely in place.
Part Number: 03-05-306
Learn More -
Motion Pro Cable Luber V3
Motion Pro Cable Luber V3. Makes it easy for you to efficiently lube control cables without the mess. Unique design features an innovative seal and adjustable plunger to ensure proper lubrication with less lube.
Part Number: 08-0609
Learn More -
ODI Elite Flow Grips V2.1 Mint (130mm)
ODI’s first generation Lock-On System are standard for mountain bike racers everywhere. ODI has redefined grip performance again. The new Elite Series grips are engineered from end to end to deliver every feature racers demand. Color: Mint
Part Number: 03-05-422
Learn More