Products
-
Blowsion Hood Bumper (3 inch)
The Blowsion Hood Bumper is a premium solution to prevent the Handle pole from contacting the hood. For Freestyle and Freeride Applications. Black Diamond. Includes 3M Adhesive Backing.
Part Number: 04-04-206
Learn More -
Blowsion Krok Kollar
Blowsion Stainless Steel machined Steering Lock nut. Includes stainless binding screw. Prevents standard lock nut torque failure. Not something made in the land of won-tons or available at your local hardware store!
Part Number: 03-05-019
Learn More -
Handle Pole Spring - Yamaha Superjet 1996+
Blowsion Heavy duty handlepole spring for the 96+ Yamaha SuperJet / 1994-1995 Yamaha FX1 / Rickter / Polaris Octane / Kawasaki Conversions. Drop in fit and well high tension design for those riders desiring a feather light handlepole.
Part Number: 03-04-012
Learn More -
Battery Box Strap - Heavy Duty
Blowsion Heavy Duty Freeride Battery Strap. Much Stronger and slightly shorter than OEM Yamaha straps which takes away the slack when using aftermarket batteries. 10 inches total length (hook to hook).
Part Number: 01-04-604
Learn More -
T Fitting 3/8" x 1/4" x 3/8" Barbed - Black
3/8" x 1/4" x 3/8" Barbed Reducer T Hose Fitting. Useful for different types of water routing applications. Primarily used with Water Injection. Color: Black
Part Number: 01-01-070
Learn More -
Blowsion Corporate Sticker 8"
Blowsion Corporate Sticker 8 inch. 12 color combos to choose from. These are not cheezy vinyl. Full screen-printed die cuts with UV protective clear. Show your vanity! Sold Each.
Learn More -
Blowsion Steering System Rebuild Kit
Blowsion Steering System Rebuild kit includes roller bearing, thrust washers, thrust bearing, and large and small O-rings.
Part Number: 03-05-020
Learn More -
Super Glue - Extra Thick 1oz
This is the FINAL answer for keeping your stitched and Hydro Turf mat kit edges stuck down. Use to seam edges permanently. Once dry it creates seamless perfection.
Part Number: 06-03-151
Learn More -
Blowsion Colored Hose - 1/8 inch
Finish the look of your engine compartment with Blowsion specialty colored 1/8" fuel primer hose. Available in Clear, Blue, Green, Orange, Red, Yellow, or Black. Quantity is sold by the foot.
Learn More -
Mikuni 44MM Dual Carburetor Kit
Dual Mikuni 44mm SBN Carburetor Kit. Linked and Custom Jetted to your engine specification. Available in 5 color options!
Learn More -
Billet Choke Knob - Yamaha
Blowsion Billet Choke Knob. Direct replacement for YAMAHA OEM Plastic choke knob. Installs with OEM set screw (Not Included). Fits all Years Yamaha Superjet, FX1 and WaveBlaster Models. Bright Dip Anodized Black.
Part Number: 04-03-351
Learn More -
Blowsion Billet Pivot Bolt - Yamaha
Lightweight Billet Handle Pole Bolt. Weighing in at an amazing 90 grams, the Blowsion 7072 Hardened Billet aluminum handlepole bolt is 1/3rd the weight of the OEM pole bolt.
Part Number: 03-04-144
Learn More -
OEM Yamaha 62T Crankcase (for DASA Stock Stroke Cylinder Kits)
Brand new modified OEM Yamaha 62T Crankcases now available from Blowsion for DASA Big Bore Stock Stroke Engine Setups. Includes Case Bore, Epoxy Fill, Trenching and Reinforcement plate for Stock Stroke Crankshafts.
Part Number: 01-03-763
Learn More
OEM Yamaha Crankcase Part Number: 62T-15100-00-00 -
Bow Pin with Lanyard & Clip
Heavy Duty Steel Bow Stop Pin with red coated handle. Comes with lanyard and clip.
Part Number: 06-06-152
Learn More -
Mikuni Adjusting T Screws - Yamaha
Mikuni high and low-speed adjuster screws with "T" cross bar - extended length for easy adjustment. Absolutely a must when running aftermarket pipes. Fits all 1996-2020 Yamaha Superjet OEM 38mm Mikuni Carburetors.
Part Number: 01-02-544
Learn More -
Side Molding 1-3/8" - Black
Made out of injection molded flexible urethane. Attaches to your watercraft with its own adhesive backing. Each kit includes special pre-wipe cleaner to promote maximum adhesion and durability. The 1-3/8" Inch size is excellent for most sitdown PWC as well as all years of Kawasaki SXR and Yamaha Super Jet.
Part Number: 04-02-300
Learn More