Products
-
Blowsion Pump Shoe - Yamaha 148MM
The Blowsion 148mm Aluminum Pump Shoe was designed for fitting larger 148mm pumps into both Yamaha Superjet and aftermarket hulls. Using our 148mm shoe vs a 144mm (stock Superjet size) will greatly increase hook up and drive when used in conjunction with 148mm pumps. Fits all years Yamaha Superjet, 1993-1996 WaveBlaster 1, Polaris Octane and Rickters. Mounting holes are not drilled or tapped so installation in the different Yamaha design aftermarket hulls can be facilitated.
Part Number: 02-02-434
Learn More -
Blowsion Dual Cooling Kit - Superjet / Octane
Blowsion Dual Cooling Kit for Yamaha Superjet and Polaris Octane Models. Kit includes all hardware and detailed installation instructions. Ultra Sano.
Part Number: 02-02-452
Learn More -
Blowsion Mat Glue - Pint
Blowsion Mat Kit Glue "Blow Goo" to the rescue. Use this solvent-based contact adhesive with your Hydro Turf or stitched mat kit and never worry again about your mats coming loose. Not water-based!
Part Number: 06-03-141
Learn More -
Pulse Line Fitting 1/4"
Brass Press In Straight Pulse Line Nipple Fitting 1/4" Hose Barb. Use for dual carburetor setups with dual fuel pumps where a second pulse line is required.
Part Number: 01-02-530
Learn More -
Bilge Pump Mount - Yamaha WaveBlaster
The Blowsion Bilge Pump Mount is designed to mount the Rule Bilge Pump (Sold Separately). Includes rivets to mount bilge pump strainer to bracket. Fits 1993-1996 Yamaha WaveBlaster 1 Models. Material: Aluminum. Color: Anodized Black.
Part Number: 06-01-107
Learn More -
Blowsion Outerwears
Blowsion logo Outerwears flame arrestor water-resistant screens. Specifically formulated to prevent water ingress. Available for tapered tornado filters. Sold Each.
Learn More -
Inline Fuel Filter 1/4"
Inline Fuel Filter 1/4". Clear Plastic for High Volume, Low pressure Fuel Systems. Inline fuel filters filter out those harmful particles that can cause engine damage.
Part Number: 01-02-550
Learn More -
Blowsion Hood Strut Lift Kit - WaveBlaster
Blowsion Hood Strut Lift Kit for Yamaha WaveBlaster. Can be adapted to other fixed steer applications with custom fitment. Includes Bracket, Struts, Hardware and Installation Instructions.
Part Number: 04-04-209
Learn More -
Ballistic Battery Foam Spacer
Properly install and secure your ballistic battery with this foam spacer. Available for all size batteries.
Part Number: 01-04-627
Learn More -
Blowsion Colored Hose - 1/8 inch
Finish the look of your engine compartment with Blowsion specialty colored 1/8" fuel primer hose. Available in Clear, Blue, Green, Orange, Red, Yellow, or Black. Quantity is sold by the foot.
Learn More -
Primer Bulb Kit - Mikuni Dual
Fits 6mm choke shaft Mikuni dual carburetors. Starting the engine of your personal watercraft is never a problem with a Blowsion primer kit. All brass fittings and Primer Bulb. Get rid of that worthless factory choke and apply a direct shot of fuel! Pair with the Blowsion Dash Fitting for best protection.
Part Number: 01-02-406
Learn More -
Bilge Switch Replacement - 9ft Wire
Finally- a replacement switch and 9 feet of cable for the always popular handlebar mount switches.
Part Number: 06-01-215
Learn More -
Drive Coupler Tool - Kawasaki
Drive Coupler Tool fits OEM Kawasaki and Aftermarket Yamaha/Kawasaki Billet Couplers. Fits 1/2-Inch Drive Socket.
Part Number: 06-04-029
Learn More -
Vacate Valve - Yamaha
A simple installation drain valve alternative for the OEM drain plugs in Yamaha model Watercraft. Available in Black or Clear Anodized Colors. Sold Each.
Learn More -
Water Bypass Fitting Pro
Blowsion Pro Water Bypass Fittings increase engine performance by diverting some of the water from the cylinder head to the bypass fitting, rather than forcing all of the water through the exhaust system. Fits 3/8" ID Cooling Hoses.
Learn More