Products
-
Bilge Pump Single Mount - Kawasaki
Single bilge pump mounting bracket for Kawasaki Sxi Pro and KAWASAKI SXR 800. Single pump mounting bracket for Kawasaki Sxi Pro and KAWASAKI SXR 800. The bracket locates the pump within millimeters from the base of the KAWI hull. Easy built in installation, no messy adhesives. Material: Aluminum. Color: Anodized Black.
Part Number: 06-01-102
Learn More -
Blowsion Billet Exhaust Nozzle - Kawasaki SXR
This is one super clean exhaust nozzle to clean up and sanitize the rear of your SXR. Function and fit are Blowsion perfect. Fits over OEM Exhaust Flange. Vanity rules on these beauties. Fits all Kawasaki SXR 800 and SXR 1500 Models. Available in all anodized colors!
Learn More -
Flow Control Valve - Pro Series
Flow Control Valve - 3/8" Adjustable Pro Model. This 3/8" valve has been designed to prevent water flow to the waterbox at idle and off idle engine speeds. This allows the craft to be more responsive off the line and around turns. Results are HUGE gains in throttle response. All stainless internal parts. IJSBA race legal. Now Available in all Colors!
Learn More -
Water Bypass Fitting 90-Degree
Blowsion Billet 90-Degree Water Bypass fittings. Fits 3/8" ID Cooling Hoses. Offered in Anodized Clear, Black, Green, Red, Blue and Orange. All Colors In stock!
Learn More -
Carburetor Adapter - Mikuni 40mm (I-Series)
Billet carb adaptors in stock and available to fit Kawasaki SXR 800 and Late Model (1998-2002) Kawasaki 750 SXi-Pro with dual Mikuni carbs. Required for adapting to aftermarket air filters / flame arrestors. Flange Outer Diameter: 2.75 (inches).
Part Number: 01-02-075
Learn More -
Brap Strap
Strap and secure your hood to avoid accidental dislodging during freestyle and freeride maneuvers. Replaces stock latch assembly. All mounting hardware included.
Part Number: 04-04-310
Learn More -
Blowsion Kawasaki Big Bore Engine - 820cc
Blowsion Kawasaki Big Bore 820cc Ported Engine. Complete Short Block.
Part Number: 01-03-770
Learn More -
DAKINE Footstrap Hardware Kit - w/glue
Now available! Dakine hardware install kit with glue for installing footstraps. Ultra sanitary and leak proof.
Part Number: 04-02-339
Learn More -
Rotary Bilge Switch - 3 Position
Blowsion Rotary waterproof bilge switches are corrosion resistant and have withstood the most abuse we can give them. Pair with the Blowsion Dash Fitting for best protection.
Part Number: 06-01-201
Learn More -
Blowsion Kick Plate
An ultra bitchin' way to keep your rear edge tray mat wrapped and sealed down. Excellent solution to a problem area for all mat installations. Available for all models.
Learn More -
Primer Kit - Mikuni Dual
Fits 6mm choke shaft Mikuni dual carburetors. Starting the engine of your personal watercraft is never a problem with a Blowsion primer kit. All brass fittings and bulletproof plunger.
Part Number: 01-02-402
Learn More -
Mat Kit - Stitched - Kicker Footwells - Kawasaki SXR 800
Glue On! Includes bottom, sides, dash and undermat. Available for OEM or Composite Railcaps. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Learn More -
Blowsion CAS Billet Aluminum One Way Valve Scupper
Our new CAS (cool as S*%!) flow valve design prevents water getting in during tail stands, wave jumping, or all out buoy shredding. The new billet flange assembly allows use of our billet exhaust outlet so vain riders can sanitize both sides of the rear of their ski. Fits all years Yamaha Superjet, Kawasaki 650, Kawasaki 750, Kawasaki SXR 800, Polaris Octane, Rickter XFS, Rickter XFR, Rickter EVO, Rickter Edge and Most Aftermarket Hulls.
Part Number: 06-01-022
Learn More -
Blowsion Tornado Filter 2.25
Blowsion Tornado Filter (2.25 inches tall). Retaining a clear velocity cone on the inside to enhance and direct airflow into the carburetor for increased overall performance, these hardcore mofo's also features an anodized aluminum outer ring with 6 color options. Extensive testing with phenomenal results in both racing, freeride and freestyle applications -- what more can you ask for? Sold Each.
Learn More -
Handle Pole Limiting Rope
The design of the Blowsion pole limiting rope is to STOP your pole from extending approx 2-3" from total max extension. This prevents the forward motion of the pole and riders body from destroying expensive handlepoles, pole brackets, hulls and also expensive human body parts!
Part Number: 03-04-151
Learn More -
Fuel Filter - Water Separator
The preferred choice for fuel filters and water separators. Fits all Yamaha Standups. Can be used also with KAWI and Polaris Octane models. 1/4" Inlet/Oulet hose size.
Part Number: 01-02-551
Learn More