Products
-
Solas Impeller - Yamaha 144MM YQ-CD
Solas Concord YQ-CD 75mm large hub Impeller for Yamaha 144mm Pumps. Fits 1990-2020 Yamaha Superjet and 1993-1996 Yamaha WaveBlaster Models. Large polished blade area and superior hub design deliver increased acceleration and top speed. Includes Nose Cone and solas Impeller tool.
Learn More -
Small Fuel Tank - For PF/RRP Pipe
Reduced size 8.5 Liter (2.25 Gal) fuel tank. Less weight- required when using TNT, RRP or PowerFactor Pipes. Specially designed fuel tank incorporates lower baffle section to reduce fuel sloshing guaranteeing uninterrupted fuel supply. Comes equipped with Dual Fuel Pickups, Fuel Pickup Filters and Fuel Tank Fittings for Gas Tank Vent and Return Lines.
Learn More -
Skat-Trak Trim Cable Long (Yamaha Pulley System)
Skat-Trak Trim Cable Long for Yamaha Pulley Systems. Fits all Blowsion trim and tilt systems with pulley system. Direct replacement for Skat-Trak and Blowsion systems.
Part Number: 02-02-544
Learn More -
Skat-Trak Set-Back Billet Magnum Pump - Yamaha
The Skat-Trak 14 Vane Two Piece Billet Set-Back Magnum Pump. Available in 148mm, 155mm, 158mm, and 160mm sizes. Includes one Skat-Trak impeller. Fits all years Yamaha Superjet, WaveBlaster and Rickter Models. Skat-Trak Extended Length Driveshaft is required.
-
Skat-Trak Impeller - Yamaha C+75 144MM
Skat-Trak Stainless Steel Impeller for all Yamaha Superjet 144MM C+75-20 Swirl.
Learn More -
Side Rail Turf Kit - Yamaha SJ / FX1 / KAW 650/750 / Rickter
Blowsion Custom Cut Side Rail Turf Kit. Fits all years Yamaha Superjet, FX1, Polaris Octane, Rickter and Kawasaki 650 and 750 Stand up Models. Improve the traction and looks on the side rails of your ski with our custom fit side rail covering kits. Side Rail Turf Kits Include enough material to cover the front bumper, sides, and rear corners of the side rail. Side rail kits bond directly to the fiberglass. All OEM/Stock plastic will need to be removed prior to application of side rail turf kit. For most applications a Quart of Mat Glue is recommended for installation. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-324
Learn More -
Side Molding 1-3/8" - Black (25FT)
Extended Length. Made out of injection molded flexible urethane. Attaches to your watercraft with its own adhesive backing. Each kit includes special pre-wipe cleaner to promote maximum adhesion and durability. The 1-3/8" Inch size is excellent for most sitdown PWC as well as all years of Kawasaki SXR and Yamaha Super Jet. Length: 25ft
Part Number: 04-02-307
Learn More -
Side Molding 1-3/8" - Black
Made out of injection molded flexible urethane. Attaches to your watercraft with its own adhesive backing. Each kit includes special pre-wipe cleaner to promote maximum adhesion and durability. The 1-3/8" Inch size is excellent for most sitdown PWC as well as all years of Kawasaki SXR and Yamaha Super Jet.
Part Number: 04-02-300
Learn More -
Side Molding 1" - Chrome
Made out of injection molded flexible urethane. Attaches to your watercraft with its own adhesive backing. Each kit includes special pre-wipe cleaner to promote maximum adhesion and durability. The 1" inch size is perfect for all years KAWI SXi/SXi Pro and all years Super Jet.
Part Number: 04-02-303
Learn More -
Side Molding 1" - Black
Made out of injection molded flexible urethane. Attaches to your watercraft with its own adhesive backing. Each kit includes special pre-wipe cleaner to promote maximum adhesion and durability. The 1" size is perfect for all years Kawasaki 750SX, SXi, SXi-Pro and All years Yamaha Superjet.
Part Number: 04-02-302
Learn More -
SE Speedmagic Air Filter
Sato Engineering SpeedMagic Air Filter. Newly updated 011 version is stronger and produces more airflow.
Part Number: 01-02-025
Learn More -
SE Speedmagic 50mm Ninja Dual Carburetors
S.E - Speedmagic 50mm Ninja Dual Carburetors. 50mm dual carb set straight out of Japan (Sato Engineering). These carbs will support a wide range of applications and are perfect for big-bore motors 900cc plus.
Part Number: 01-02-106
Learn More -
Rule Bilge Pump Strainer Base
Replacement Fuel Resistant Rule Bilge Pump Strainer Base. Compatible with All Rule 360-1100GPH Models.
Part Number: 06-01-311
Learn More -
RRP X-Lite Steering System
RRP X-LITE Steering System that works with 28.6mm 1-1/8" Inch Fat bars only. Allows rider choice of 4 different handlebar options. Installation hardware and instructions included. Now available in Black, Blue, Red and Clear.
Learn More -
RRP X-Lite Handle Bar Pad
RRP X-LITE AST Protective Handlebar Pad. Compatible with New RRP X-Lite Steering Systems. Available in Black Only.
Learn More