Products
-
Blowsion Mat Glue - Pint
Blowsion Mat Kit Glue "Blow Goo" to the rescue. Use this solvent-based contact adhesive with your Hydro Turf or stitched mat kit and never worry again about your mats coming loose. Not water-based!
Part Number: 06-03-141
Learn More -
OEM Yamaha Driveshaft - Superjet (2008-2020)
Genuine OEM Yamaha 2008-2020 Superjet Driveshaft. Fits all 2008-2020 Yamaha Superjet models.
Part Number: 6BA-45511-00-00
Learn More -
OEM Yamaha Pump Shoe Seal 144MM
OEM Yamaha Pump Shoe Seal. Fits all OEM Yamaha, Skat-Trak and Solas 144mm Pumps.
Part Number: 6R7-51117-01-00
Learn More -
Mikuni Check Valve (Clear)
Genuine Mikuni Replacement Check Valve Mikuni SBN Carburetors. Diagram #12.
Part Number: BN34/107
Learn More -
PowerFactor Exhaust Kit
Not for the faint of heart (or wallet!), The PowerFactor Dry Exhaust system has been used by the top freestyle riders for the last 7 years, and has won 6 world championships. Learn More -
Bilge Pump - Rule - 500GPH Automatic
Rule 25SA Fully Submersible Bilge Pump, 500 Gallon Per Hour, 12 Volt DC, Automatic Electronic Sensing. Bilge Pump turns on and checks for water approximately every 2-1/2 minutes. If resistance (water) is found, it will run for as long as water is present. When all the water is pumped out, the pump shuts off and returns to its 2-1/2 minute test cycle.
Part Number: 06-01-002
Learn More -
OEM Yamaha Steering Nozzle - Superjet (2008-2020)
Genuine OEM Yamaha Steering Nozzle. Fits 1990-2007 Yamaha Superjet,1994-1995 FX1 and 1993-1995 WaveBlaster Models.
Part Number: 6BA-51313-00-00
Learn More -
Bilge Fitting 45-Degree
Blowsion 45-Degree machined aluminum bilge fittings are a clean replacement of the bulky plastic fittings usually supplied with aftermarket bilge pump kits. Available in Anodized Black or Clear.
Learn More -
Tow Loop - Bow Eye Mount Cable
Newly Designed. Easily allows tow watercraft to clip and go. Surf riders and racers are insane to ride without one of these. The ONLY way to effectively guarantee avoiding the next big wave set or the next racer on the course.
Part Number: 04-03-069
Learn More -
WSM Short Shaft - Yamaha Superjet
WSM Aftermarket 160mm Short Shaft. Fits 1995 and Newer Yamaha SuperJet Models. Replacement for OEM Yamaha PN# 6R7-51323-02-00
Part Number: 003-250
Learn More -
ODI Elite Flow Grips V2.1 Mint (130mm)
ODI’s first generation Lock-On System are standard for mountain bike racers everywhere. ODI has redefined grip performance again. The new Elite Series grips are engineered from end to end to deliver every feature racers demand. Color: Mint
Part Number: 03-05-422
Learn More -
Blowsion SS Jet Ski Cover - Yamaha Superjet (1996-2020)
Blowsion Stealth Series PWC Jet Ski Covers. No more cover flapping on the freeway. Weather resistant material with special UV coating. Engineered for a custom fit for each PWC model. Fits all 1996-2020 Yamaha Superjet Models. Color: Stealth Black.
Part Number: 06-06-042
Learn More -
DASA Cylinder Base Gasket
DASA Replacement Cylinder Base Gasket. Available for 85mm and 89-94mm Billet Cylinder Kits.
Learn More -
ODI TLD Grips Aqua (130mm)
ODI has enlisted the help of our good friends over at Troy Lee Designs to help put an artistic spin on a quality design. After hundreds of drawings and designs, what has been developed is one of the most innovative ODI grips yet...The ODI TLD Lock-On Grip.
Part Number: 03-05-329
Learn More