Products
-
Mat Kit - Kickers - Polaris Octane
Blowsion Custom Cut Mat Kit. Glue it On! Fits all Polaris Octane Models with Kicker Footwells. Includes bottom, tray sides, dash, footwell mat pieces, and undermat foam. Kicker Footwells not included. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-088
Learn More -
Trailer Bow Stop - Rubber
Non-marring, shock-absorbent polyurethane bowstop fits Super Jet, Waverunner III, and similar PWCs. Bow Pin with Lanyard & Clip not included.
Part Number: 06-06-141
Learn More -
Tow Loop - Bow Eye Mount Cable
Newly Designed. Easily allows tow watercraft to clip and go. Surf riders and racers are insane to ride without one of these. The ONLY way to effectively guarantee avoiding the next big wave set or the next racer on the course.
Part Number: 04-03-069
Learn More -
Blowsion Colored Hose - 1/4 inch
Finish the look of your engine compartment with Blowsion specialty colored 1/4" fuel hose. Available in Clear, Blue, Green, Orange, Red, Yellow, or Black. Quantity is sold by the foot in continuous lengths.
Learn More -
Blowsion Corporate Sticker 4.5"
Blowsion Corporate Sticker 4.5 inch. 12 color combos to choose from. These are not cheezy vinyl. Full screen-printed die cuts with UV protective clear. Show your vanity! Sold Each.
Learn More -
Expanding Foam (2 Part) - Pint Kit
No more home insulation foam in a can. This is the real deal. Marine quality expanding foam. Mix equal parts A and B in the supplied mixing cups and you have waterproof and cured foam expanding in 60 seconds or less.
Part Number: 06-03-131
Learn More -
OEM Bullet Terminals - 20 Pack
Replacement OEM bullet connectors now available at Blowsion. Kit includes 20 Male and Female terminals with Insulators. Perfect for those super sanitary bilge kit installations or replacements for Electrical box connections.
Part Number: 01-04-418
Learn More -
Blowsion Turbulator Chin Pad
New Blowsion Turbulator Chin Pad. Specifically designed and form fit for the Blowsion Billet Handlepole. Custom Color options available!
Learn More -
Mikuni Super BN Carb Bolt Kit
Blowsion Stainless Steel Socket Head Bolt Kit for Mikuni Super BN Carburetors. The Socket Head Bolt design allows for use of hex key tool which results in much easier access. Replace those easy to strip Mikuni phillips head screws before it is too late!
Part Number: 01-02-547
Learn More -
Footwells - Dawson Digger
These hand-laid, molded fiberglass insets provide extended room in the tray of your ski to position your feet. Comfortably sized for average feet (sizes 6-11), these footwells also feature a gentle protrusion over the top of your foot.
Part Number: 05-03-004
Learn More -
Blowsion Hood Seal
Heavy Duty Replacement Hood Seal. Fits all years Yamaha Super Jet, Yamaha FX-1, all years Polaris Octane, Yamaha Wave Blaster and most aftermarket hulls. Dimensions: L 2.7m x W 16mm x H 19mm.
Part Number: 04-04-411
Learn More -
TNT Waterbox Coupler 2.25"
2.25 Inch Heavy Duty 6 Ply Waterbox Coupler for TNT V2/V3 Exhaust Systems. Connects Exhaust Chamber to the Waterbox. 2.25 (ID) x 5.125 (LENGTH).
Part Number: 01-01-166
Learn More -
Blowsion Steering System without Turnplate
Blowsion Billet aluminum steering system without turnplate. Stainless Steel Turnplate shaft rides in two O-ring sealed bearings. Included special machined Blowsion Krok Kollar stainless lock nut with set screw. Fits all stock or aftermarket Yamaha design handle poles. Steering Cap and bearing housing are carbon anodized black for corrosion protection. Works with Blowsion Kawasaki and Yamaha billet shortened turnplate. Includes 7/8" Handlebar Clamps.
Part Number: 03-05-001
Learn More -
Blowsion Handlebar Clamps
Blowsion Billet aluminum handle bar clamps for 7/8" Inch bars. Sold as a pair (2) with stainless bar clamp screws included. These bar clamps provide the finishing touch to a clean steering system. Now available in all anodized colors!
Learn More -
Side Molding 1" - Black
Made out of injection molded flexible urethane. Attaches to your watercraft with its own adhesive backing. Each kit includes special pre-wipe cleaner to promote maximum adhesion and durability. The 1" size is perfect for all years Kawasaki 750SX, SXi, SXi-Pro and All years Yamaha Superjet.
Part Number: 04-02-302
Learn More -
T Fitting 3/8" x 1/4" x 3/8" Barbed - Black
3/8" x 1/4" x 3/8" Barbed Reducer T Hose Fitting. Useful for different types of water routing applications. Primarily used with Water Injection. Color: Black
Part Number: 01-01-070
Learn More