Products

Brand new modified OEM Yamaha 62T Crankcases now available from Blowsion for DASA Big Bore Stroker Engine Setups. Includes Case Bore, Epoxy Fill, Trenching and Stroker Case Reinforcement plate for +5mm, +6mm, 8mm and +10mm stroker crankshafts.

Part Number: 01-03-762

The Blowsion 148mm Aluminum Pump Shoe was designed for fitting larger 148mm pumps into both Yamaha Superjet and aftermarket hulls. Using our 148mm shoe vs a 144mm (stock Superjet size) will greatly increase hook up and drive when used in conjunction with 148mm pumps. Fits all years Yamaha Superjet, 1993-1996 WaveBlaster 1, Polaris Octane and Rickters. Mounting holes are not drilled or tapped so installation in the different Yamaha design aftermarket hulls can be facilitated.

Part Number: 02-02-434

Blowsion Tornado Filter (2.25 inches tall). Retaining a clear velocity cone on the inside to enhance and direct airflow into the carburetor for increased overall performance, these hardcore mofo's also features an anodized aluminum outer ring with 6 color options. Extensive testing with phenomenal results in both racing, freeride and freestyle applications -- what more can you ask for? Sold Each.

Blowsion Cylinder Spacer plates to be used in stroker applications or to modify cylinder deck height. Available for 701/760 and 850 cylinder sizes. Sold each.

The preferred choice for fuel filters and water separators. Fits all Yamaha Standups. Can be used also with KAWI and Polaris Octane models. 1/4" Inlet/Oulet hose size.

Part Number: 01-02-551

Now available! Dakine hardware install kit for installing footstraps. Ultra sanitary and leak proof.

Part Number: 04-02-338

Blowsion Midshaft Spacer Plate has been designed for use with OEM mid shaft housing in combination with many aftermarket hulls. Many of the aftermarket hulls available today do not have the recessed lip that OEM Midshaft housing require in order to flex as you are riding your watercraft. Without this midshaft spacer you risk stripping the splines of your driveline short shaft and driveshaft due to the inability of the driveline to flex properly.

Part Number: 04-04-062

Brass Press In Straight Pulse Line Nipple Fitting 1/4" Hose Barb. Use for dual carburetor setups with dual fuel pumps where a second pulse line is required.

Part Number: 01-02-530

Blowsion Stainless Steel Socket Head Bolt Kit for Mikuni Super BN Carburetors. The Socket Head Bolt design allows for use of hex key tool which results in much easier access. Replace those easy to strip Mikuni phillips head screws before it is too late!

Part Number: 01-02-547

Blowsion Cylinder Head Girdle Kit for Yamaha 760 or 701 Engines. All Stainless steel bolts, washers, and girdle hardware included. Compatible with Blowsion 2-Piece and pre-2015 Blowsion 1-Piece Yamaha Cylinder Heads.

Part Number: 01-03-114

Each kit includes all materials needed for mixing into, and handling, your installation resin (available separately). Silica Thickener, Mixing Cups, Brushes, Gloves and Knitted fabric cloth for all seams.

Part Number: 06-03-113

Blowsion Carbon composite tank holder keeps the tank from sliding around in the bottom of a hull during freestyle maneuvers. Available for Small Fuel Tank and OEM/ColdFusion Yamaha Fuel Tanks.

Blowsion Stainless Steel Steering Cable Extension. Compatible with our Yamaha Superjet and Kawasaki SXR Heavy Duty Steering Cables.

Part Number: 03-04-211

Replacement Blowsion OVP Steering Stem and Nut Kit. Fits OVP Steering Systems for Blowsion Billet Handlepoles.

Part Number: 03-05-047

Finish the look of your engine compartment with a Blowsion Colored Hose Kit. Hose Kit includes 10 foot lengths of 1/8 Primer, 1/4 Fuel and 3/8 Water lines. Available in Black, Blue, Green, Orange, Red, or Yellow.