Products
-
Super Reed Gasket - Kawasaki 750 / SXR 800
Replacement Super Reed Gaskets. These babies have a special Teflon coating with metal core for maximum blow-out protection. Fits all Kawasaki 750 and SXR 800 models. Sold Individually.
Part Number: 01-02-455
Learn More -
Primer Bulb Kit - Keihin Single
Fits 8mm choke shaft Keihin single carburetors. Starting the engine of your personal watercraft is never a problem with a Blowsion primer kit. All brass fittings and Primer Bulb. Get rid of that worthless factory choke and apply a direct shot of fuel! Pair with the Blowsion Dash Fitting for best protection.
Part Number: 01-02-407
Learn More -
Bilge Pump Hose - 3FT
Blowsion Bilge Pump Hose - 3 Foot Section is plenty for most single pump applications. Color: Black Only. Hose Diameter (ID): 3/4" inch.
Part Number: 06-01-301
Learn More -
Throttle Cable Bracket - Diaphragm Mount
Mikuni Diaphragm Mount throttle cable bracket. Trick mounting setups are enabled with this handy bracket. Stainless Steel Mounting Hardware Included. Now available in two sizes.
Learn More -
Blowsion Cylinder Sleeve - Kawasaki 820
Blowsion's OEM Kawasaki Replacement Big Bore Cylinder Sleeves are designed with greater sleeve thickness for use up to 85.00mm Bore. Does not require any case modification to fit. For all Kawasaki 750 and SXR 800 Models. Fits piston sizes 83.00mm to 85.00mm. Sold Each.
Part Number: 01-03-410
Learn More -
Blowsion Turbulator Chin Pad
New Blowsion Turbulator Chin Pad. Specifically designed and form fit for the Blowsion Billet Handlepole. Custom Color options available!
Learn More -
Side Rail Turf Kit - Yamaha SJ / FX1 / KAW 650/750 / Rickter
Blowsion Custom Cut Side Rail Turf Kit. Fits all years Yamaha Superjet, FX1, Polaris Octane, Rickter and Kawasaki 650 and 750 Stand up Models. Improve the traction and looks on the side rails of your ski with our custom fit side rail covering kits. Side Rail Turf Kits Include enough material to cover the front bumper, sides, and rear corners of the side rail. Side rail kits bond directly to the fiberglass. All OEM/Stock plastic will need to be removed prior to application of side rail turf kit. For most applications a Quart of Mat Glue is recommended for installation. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-324
Learn More -
Blowsion Battery Box
Replace that cracked and worn out stock plastic battery box with bulletproof Blowsion aluminum. Each box includes all stock location retaining clips for easy exchange. Padded bottom. Direct fit replacement for all years Yamaha Super Jet, FX1 and Polaris Octane. Can be fit as replacement to all Years Kawasaki 750 and SXR 800 with minor battery strap modifications. Color: Anodized Black
Part Number: 01-04-601
Learn More -
Blowsion Steering Stop
Blowsion stainless Steering Stop and nut. Updated design allows for two mounting positions for riders wanting more steering throw. Fits all OEM, UMI,Factory Yamaha, RRP and AC aluminum Handlepoles.
Part Number: 03-04-131
Learn More -
Epoxy Resin (2 Parts Pint each) - Quart Kit
Epoxy (2 Part) - Pint Kits. High performance, gap filling, waterproof, 2 part epoxy designed to provide superior results in footwell installations, hull reinforcement and repair. Easy 1 to 1 mixing ratio keeps it simple for even the beginner.
Part Number: 06-03-122
Learn More -
Mat Kit - Stitched - Digger Footwells - Kawasaki 750
Glue On! Includes bottom, sides, dash and undermat foam. Fits all years Kawasaki 750SX, SXI and SXi-Pro Models for Digger Composite Footwells. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-008
Learn More -
Blowsion Corporate Sticker 4.5"
Blowsion Corporate Sticker 4.5 inch. 12 color combos to choose from. These are not cheezy vinyl. Full screen-printed die cuts with UV protective clear. Show your vanity! Sold Each.
Learn More -
Engine Flush Kit - Single Outlet
All metal and stainless construction. Easy to use. Just push in to your 45 degree or 90 degree aftermarket aluminum water bypass(es). Backflush away!
Part Number: 06-04-001
Learn More -
Small Fuel Tank - For PF/RRP Pipe
Reduced size 8.5 Liter (2.25 Gal) fuel tank. Less weight- required when using TNT, RRP or PowerFactor Pipes. Specially designed fuel tank incorporates lower baffle section to reduce fuel sloshing guaranteeing uninterrupted fuel supply. Comes equipped with Dual Fuel Pickups, Fuel Pickup Filters and Fuel Tank Fittings for Gas Tank Vent and Return Lines.
Learn More -
Undermatting Foam - 5mm Standard
39" x 19" section of White 5mm thick Standard foam undermat. Add extra cushion with this standard 5mm underpad. Easily Sand-able for custom shaping of footwell areas.
Part Number: 04-02-326
Learn More -
Mikuni 44MM Dual Carburetor Kit
Dual Mikuni 44mm SBN Carburetor Kit. Linked and Custom Jetted to your engine specification. Available in 5 color options!
Learn More