Products
-
Blowsion Steering System 7/8"
Blowsion Billet Steering System for 7/8" Standard Handlebars. Works with OEM and Aftermarket 7/8" Handlebars. Steering System Includes Shortened Turnplate and 7/8" Handlebar Clamps. Now Available in all colors!
Learn More -
Leak Down Block Off Kit Yamaha (62T)
Blowsion Engine Leak Down Block Off Kit. This is an essential tool for determining engine health. Make sure your fresh rebuilt engine is sealed properly, or use it to diagnose engine and/or tuning issues. Utilize your existing leak down tester or plug your Pop-off pressure gauge into the pulse fitting on your cases and check for air leaks. Includes anodized aluminum plates and rubber gaskets to match. All mounting hardware included. Fits all years 62T 701 engines and 62t 760 engines with a b-pipe manifold.
Part Number: 01-03-816
Learn More -
Blowsion Hood Hooks - SXR
Utilizing our many years of Super Jet Freestyle and surf quality hood hook design experience, these bulletproof SXR billet hood hooks allow for the ultimate abuse of your 2003 and newer Kawasaki SXR 800 and SXR 1500 on the race course, river or in big surf. Do not risk losing your hood -- no more tweaked or broken OEM clips bending or breaking and causing serious engine and wallet damage. Includes Stainless Steel Mounting Hardware. Color: Anodized Black.
Part Number: 04-04-101
Learn More -
Water Filter Inline 3/8"
Inline Water Filter. Made from impact resistant nylon with 3/8” barb ends. A clear bowl and removable filter screen allow easy inspection and cleaning.
Part Number: 01-01-780
Learn More -
Footwells - Dawson Digger
These hand-laid, molded fiberglass insets provide extended room in the tray of your ski to position your feet. Comfortably sized for average feet (sizes 6-11), these footwells also feature a gentle protrusion over the top of your foot.
Part Number: 05-03-004
Learn More -
T-Bolt Hose Clamp 3.5"
316 Stainless Steel Heavy Duty T-Bolt Hose Clamp for 3.5" Exhaust Couplers. Compatible with all TNT, RRP Carbon and PowerFactor Style Exhaust Systems.
Part Number: 01-01-175
Learn More -
Throttle Cable Bracket - Diaphragm Mount
Mikuni Diaphragm Mount throttle cable bracket. Trick mounting setups are enabled with this handy bracket. Stainless Steel Mounting Hardware Included. Now available in two sizes.
Learn More -
Blowsion Billet Hood Locators - Yamaha Superjet 2021+
Our billet Hood locators replace the stock hood locators at the rear of the hood. They are stronger than OEM plastic locators to ensure your hood stays in place. Available in all anodized colors.
Learn More -
Blowsion Classic Snapback Hat - Black/Charcoal
Blowsion Classic Snapback Hat. One Size Fits Most. Color: Black/Charcoal.
Part Number: 07-01-841
Learn More -
Blowsion 8mm Billet Conical Washers
Blowsion 8mm Billet Conical Washers. Replace the brittle and breakable plastic nylon washers that are included with Rickter and many aftermarket hulls. Available in all Colors!
Learn More -
Y Fitting 3/8" Barbed - Black
3/8" Barbed Wye Hose Fitting. Useful for different types of water routing applications.
Part Number: 01-01-068
Learn More -
Blowsion Barcade Tank Top
Blowsion Barcade Tank Top. Unisex Sizing. Available in all sizes. Color: Black.
Learn More -
Mat Kit - Diggers - Kawasaki 750
Blowsion Custom Cut Mat Kit. Glue it On! Fits all Kawasaki 750SX, SXi and SXi-Pro Models with Digger Footwells. Includes bottom, tray sides, dash, footwell mat pieces, and undermat foam. Digger footwells not included. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-002
Learn More -
Mat Kit - Stitched - Freestyle Lifters - Yamaha Superjet (1996-2020)
Complete 4 Piece Replacement Custom Stitched Mat Kit: Includes Bottom, Sides with Integrated Lifter Bumps, Dash and Undermat Foam. Fits Yamaha Superjet (1996-2020). Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-084
Learn More -
Blowsion Snapback Since89 Hat - Black/Green
Blowsion Snapback Since89 Hat. 5 Panel black with mesh back and rounded visor. 58cm. Color: Black/White
Part Number: 07-02-558
Learn More -
Blowsion Steering Stop
Blowsion stainless Steering Stop and nut. Updated design allows for two mounting positions for riders wanting more steering throw. Fits all OEM, UMI,Factory Yamaha, RRP and AC aluminum Handlepoles.
Part Number: 03-04-131
Learn More