Pump & Handling
-
Blowsion Billet Intake Grate - Yamaha Superjet 2021+
Many processes work together to keep Earth's water moving through its cycle. Blowsion’s R&D team explored the same Hydrologic Cycle to bend water to the upper most regions of the Superjet pump, no small challenge! This resulted in a multi fin design capable of maximizing pump load (AKA reduced pump cavitation) for cornering while maintaining straight line speed and stability. Additionally our engineers developed two fin orientations (3-Fin & 5-Fin) for varying water conditions and or rider preferences. In a nutshell these things kick-ass and won multiple moto’s at the 2021 IJSBA World Finals!
Learn More -
Blowsion Midshaft Spacer Plate
Blowsion Midshaft Spacer Plate has been designed for use with OEM mid shaft housing in combination with many aftermarket hulls. Many of the aftermarket hulls available today do not have the recessed lip that OEM Midshaft housing require in order to flex as you are riding your watercraft. Without this midshaft spacer you risk stripping the splines of your driveline short shaft and driveshaft due to the inability of the driveline to flex properly.
Part Number: 04-04-062
Learn More -
Blowsion Pump Bolt Kit
Blowsion Stainless Steel Pump Bolt Kit for all Yamaha Superjet and Rickter Models. The Socket Head Bolt design allows for use of hex key tool which results in much easier access. A Great replacement for OEM Yamaha Part Number: 90119-10948-00. Kit Includes 4 Bolts and 4 Washers.
Part Number: 02-02-478
Learn More -
Blowsion Pump Bolt Kit Long 155MM
Blowsion Stainless Steel Pump Bolt Kit for Yamaha 155mm Pump Conversions with threaded wear ring. The Socket Head Bolt design allows for use of hex key tool which results in much easier access. Kit Includes 4 Bolts.
Part Number: 02-02-479
Learn More -
Blowsion Pump Shoe - Yamaha 144MM
Blowsion Aluminum Pump Shoe for Yamaha 144mm Pumps. Replace that easily broken OEM plastic intake duct with this unbreakable aluminum replacement. Fits all years Yamaha Superjet, 1993-1996 WaveBlaster 1, Polaris Octane and Rickters. Mounting holes are not drilled or tapped so install in the different Yamaha design aftermarket hulls can be facilitated.
Part Number: 02-02-432
Learn More -
Blowsion Pump Shoe - Yamaha 148MM
The Blowsion 148mm Aluminum Pump Shoe was designed for fitting larger 148mm pumps into both Yamaha Superjet and aftermarket hulls. Using our 148mm shoe vs a 144mm (stock Superjet size) will greatly increase hook up and drive when used in conjunction with 148mm pumps. Fits all years Yamaha Superjet, 1993-1996 WaveBlaster 1, Polaris Octane and Rickters. Mounting holes are not drilled or tapped so installation in the different Yamaha design aftermarket hulls can be facilitated.
Part Number: 02-02-434
Learn More -
Coupler Dampener - Yamaha / Kawasaki
Rubber Coupler Dampener for use with Blowsion billet Yamaha Superjet and Kawasaki aftermarket Drive Couplers.
Part Number: 02-02-205
Learn More -
Destroyer Hardware Kit
Replacement Hardware Install Kit for Blowsion Tubbie Destroyer Sponsons.
Part Number: 02-01-021
Learn More -
Destroyer Sponsons - Kawasaki SXR / 750 / HydroSpace
The Blowsion Destroyer Sponsons are built and shaped specific to the unique hull shape of the Kawasaki SXR, 750 and HydroSpace, the Tubbie Race Destroyer for the SXR and HS is fully removable with an average 10 minute per side install! Available with Black or White Finish.
Learn More -
Destroyer Sponsons - Rickter - Black
Built and shaped specific to the unique hull shape of the Rickter Freeride models (FR2, FS-2, EDGE, and EVO models) the Tubbie Destroyer is fully removable with an average 10 minute per side install and removal once hull inserts are installed. Color: Black
Part Number: 02-01-009
Learn More -
Destroyer Sponsons - Rickter - White
Built and shaped specific to the unique hull shape of the Rickter Freeride models (FR2, FS-2, EDGE, and EVO models) the Tubbie Destroyer is fully removable with an average 10 minute per side install and removal once hull inserts are installed. Color: White
Part Number: 02-01-008
Learn More -
Destroyer Sponsons - Superjet 1990-2007 - Black
Blowsion Destroyer Sponsons for 1990-2007 Yamaha Superjet Models. With the goal in mind of trying to improve on an already amazing product, the result is a sponson design that is simply the premier model of the Blowsion original Tubbie sponsons. Color: Yamaha Black.
Part Number: 02-01-017
Learn More -
Destroyer Sponsons - Superjet 1990-2007 - White
Blowsion Destroyer Sponsons for 1990-2007 Yamaha Superjet Models. With the goal in mind of trying to improve on an already amazing product, the result is a sponson design that is simply the premier model of the Blowsion original Tubbie sponsons. Color: Yamaha White.
Part Number: 02-01-013
Learn More -
Destroyer Sponsons - Superjet 2008+ / FX-1
Trying to improve on an already amazing product? The new Tubbie Destroyer sponson design is simply the Ferrari of the Blowsion original Tubbie Freeride sponsons. Built and shaped specific to the unique hull shape of the 2008 and Newer Yamaha SuperJet and FX1. Available in White or Black.
Learn More -
Destroyer Sponsons - Superjet 2021+
Introducing the ultimate upgrade for your 2021+ Yamaha Superjet TR-1 1050 4-Stroke: the Blowsion Destroyer Sponson. Engineered to enhance your riding experience, these sponsons are a must-have for any watercraft enthusiast looking to take their performance to the next level. Available in black and white.
Learn More -
Drive Coupler Tool - Kawasaki
Drive Coupler Tool fits OEM Kawasaki and Aftermarket Yamaha/Kawasaki Billet Couplers. Fits 1/2-Inch Drive Socket.
Part Number: 06-04-029
Learn More